Selding-ef Electrofusion Welding Machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 25 Sets per Month set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Universal electro fusion processor
1.universal fusion
2.for less than 400mm
3.back-light
4.power:AC86-264v
5.bar code reader
Universal electro fusion processor
Electro Fusion Fitting system is electrically fusion jointing method that the gap between fitting and PE pipe is heated and melted by the means of resistance wires which are placed in the socket in the fitting. Each EF Sockets are controlled automatically by micro-processor and RMS value.
Features
All functions are designed for ease of operation.
The display is equipped with back-lighting. This will enable operator to work in poor lighting and at night
Depending on site, fusion number is automatically changed and stored (up to 10 site names). Inputting site name can continuously connect fusion number and perform work even when moving from site to site.
You can see fusion content using view function without printing. (Black mark at abnormal part)
The built-in printer uses thermal paper (safe for 5 years). Outputting 1 fusion result takes about 1.5 seconds.
Change quantity of output current per hour is divided into 10 sections for output, so that reliability on fused material may be enhanced.
Output capacity is designed as 3600W (@220Vac) in order to supply stable output.
The machine is equipped with a bar code reader of convenient CCD type, which can read at once.
Stable fusion becomes possible thru accurate control of output voltage (8-50±0.2Vac) at the input voltage even with high voltage jumps.
Universal fusion : resistor, barcode and manual.
Specification
Operating voltage |
AC86 to 264V |
Fusion voltage |
AC170 to 250V |
Output voltage |
AC8 to 50V ±0.2V |
Operating Temperature |
-23°Cto 49°C |
Dimension |
380(W)X320(D)X270(H) |
Weight |
21Kg |
Power consumed |
0.1Kw~3.6Kw |
Output current |
2A~80A |
Fusion data storage |
200 Times |
Fusion time |
10sec to 5999sec |
- Q:What kind of reinforcement is needed for 32MM steel bars on Railway overpasses, what kind of welding machine is preferred for welding machines, what brand is selected and what type?. Please help users answer, thank you very much
- 1 、 using UN2-150 welder.2 、 flash butt welding is widely used for longitudinal connection of steel bars and welding of prestressed steel bars and screw end rods. The principle is the use of flash butt welding of reinforcing steel welding ends make contact through the high current low voltage, the steel is heated to a certain temperature to soften the axial pressure on the formation of forging, welding head. Flash butt welding of reinforcing steel, continuous flash welding, preheating flash welding and flash preheating flash welding. The fourth grade steel bar is sometimes treated with electric heating after welding.3, steel (Rebar) refers to reinforced concrete and prestressed reinforced concrete steel, its cross section is round, sometimes with rounded square. Including round steel bar, ribbed steel bar and twisted steel bar. Steel bars for concrete reinforcement is straight or strip steel plate reinforced concrete reinforcement steel, its shape is divided into round steel bar and deformed steel two, straight and coiled state for delivery two.
- Q:To the welder 380 V, 36 volt transformer always burn, what's the matter?
- The butt welding machine is intermittently working and won't burn easily. If burned frequently, it means that the no-load current is too large and it is very hot when not working. The countermeasures are: after burn wound, asked the chef to the primary coil (a primary coil) increase the number of turns of 5%, this will not be burned, but the general master are not willing to give you more laps, though you give more money. They will say "the place is not enough." "not open around ah" and so on the grounds, because more laps rarely burned, so messed up their jobs, cut its way. Not just the transformer, the maintenance of the motor is the case. There is a way to let him to ensure the use of time, such as a month burned once, you let him that two years is not burned, is winding double the fee increase, the general master will agree, control the time they have burned, grasp than you.
- Q:Why are the alternating current welding machine and the welding machine considered in the quota?
- Different machines charge separately
- Q:I would like to buy a flash butt welding machine, I would like to understand the principle of welding machine to see if it can meet the requirements of welding. I welded the cross section of the pipe cross section, requiring the sealing 15KG pressure of the bead
- Principle:In this stage, the power supply is first connected and the two workpiece face is slightly contacted, so that a lot of contact points are formed. When the current through the contact point, melting into liquid metal connected to the two end of the lintel. Due to high current density of liquid in the liquid metal lintel, evaporation, blasting in the lintel lintel. With the moving clamp slowly advancing, lintel has been produced and blasting. Liquid metal particles are ejected continuously from the interface under the influence of vapor pressure and electromagnetic force. Spark of sparks - flash.In the flash process, the workpiece is gradually shortened, and the end temperature is gradually increased. With the increase of temperature at the end of the lintel blasting will accelerate the speed and propulsive speed clamp must also increase gradually. Before the end of the flash process, the entire end of the workpiece must be made of a liquid metal layer, and at a certain depth, the metal reaches the plastic deformation temperature.In the flash stage at the end of the top exert enough pressure on the workpiece immediately, the interface gap decreases rapidly to stop blasting into the lintel, upsetting stage. Upsetting is the role of the seal clearance and left end surface of the liquid metal lintel after blasting crater, liquid metal and oxide inclusions and extrusion surface, the plastic metal clean close contact, and the joint area of plastic deformation, in order to promote the recrystallization in grain, forming a common and strong the joint.
- Q:How long does it take for electroslag welding machine to butt a steel joint? Which kind of butt welding method is adopted for steel butt joint on construction site? Which welding machine is the best?
- One of the joints of electroslag welding is about 5 minutes.The site is usually: vertical (pillar) electroslag welding; transverse (Liang Ban) arc welding.There are flash butt welding, welding quality is often not high, and welding equipment difficult upstairs homework, not often used.
- Q:When the wiring of the motor is connected, how many transformers can be used for the welding machine, and the AC output of the transformer is also changed into direct current?
- How do you solder it?! Not yet! Please consult me! Like an electric welding? I
- Q:Hello, I am doing wire hardware, I would like to know the line welding machine, welding machine, etc., and wire bending, molding, etc., there are no related exhibitions, thank you!!Just to know if there are any related exhibitions
- Although I'm sitting there for a long time, I don't know how to do it like wire hardware.
- Q:What's the biggest difference between domestic and imported steel cord welder? Besides price?
- That depends on what route your product is going through. Just like buying a car, Mercedes, S600 and Santana can be used to see your needs.The first few years I used the domestic welding machine, not considering the price asked, is worried about the problem of customer service, then domestic welder repair rate so I really can not stand, they have changed, found before the worry is redundant, the first machine isn't bad, even if some supplies needed through the replacement purchase agent is also very convenient, are the basic spot.Not to say that domestic things are not good, but it is so breath. Very helpless.
- Q:Is the spot welding machine good or DC?
- AC welding machine is the wire package step-down transformer using welding rod, this machine, old technology, power consumption, copper consumption.The DC welding machine includes thyristor, inverter (MOS tube, IGBT single tube and IGBT module), and the technology is more and more advanced.The inverter is a new technology that has appeared in the last 10 years, saving more than 35%. Because there is no large transformer, a great deal of copper is saved, and the transformer consumption is also reduced a lot. The disadvantage of DC is that the magnetic deviation blows, and the other is all advantages. Arc stability, weld formation is good, and there is welding rod, general acid welding rod is AC and DC can use, alkaline welding rod recommend DC, cellulose electrode, seems to only dc.
- Q:Construction steel butt welding or welding good?
- First of all, consider the construction of steel products to be welded quantity and strength requirements.The butt welding belongs to pressure welding and is suitable for mass production in batches.Electric welding is melting welding, its operation is flexible, suitable for field welding, and the two welding methods are different in use, so they can not be replaced by each other.From the performance of the joint, the welded joint is well welded, so the quality of welding is higher than that of the welding.
1. Manufacturer Overview |
|
---|---|
Location | Jiangsu,China (Mainland) |
Year Established | 2010 |
Annual Output Value | |
Main Markets | 20.00% Western Europe 20.00% Mid East 20.00% South America 20.00% North America 10.00% Northern Europe 9.00% Southeast Asia 1.00% Central America |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | 61% - 70% |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | 10,000-30,000 square meters |
No. of Production Lines | 7 |
Contract Manufacturing | OEM Service Offered Design Service Offered Buyer Label Offered |
Product Price Range |
Send your message to us
Selding-ef Electrofusion Welding Machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 25 Sets per Month set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords