Induction Melting Furnace 12T
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Packaging & Delivery
Packaging Detail: | nude for furnace body, plywood case for parts. |
Delivery Detail: | 120 days after getting order confirmation. |
Specifications
Electric Induction Furnace
1 durable safe reliable
2 easy start up(zero start)
3 low power consumption
4 easy operation
12T Electric Induction Furnace
I. Working Principles and Main technical parameters
ITEM | GW-12-8000/0.5J |
Rated Power | 8000 KW |
Named capacity of the furnace | 12 T |
Input Voltage and Power Frequency | 950V,50HZ 12 Pulse |
Working Voltage | 3400 V |
Working Frequency | 500 HZ |
Speed of the melting (steel) | 10`11 T/H |
Operation temperature | 1600 °C |
Operation pressure of the cooling water | 0.25 ~ 0.3 |
Energy consumption | 500/550 Kw.h/t |
Quantity of the power source phase | 3(Φ) phase |
Quantity of the furnace phase | single(Φ) phase |
II.operating conditions:
(1) Ambient temperature: +5°C ~ 40°C;
(2) Relative humidity shall not exceed 90% (25°C);
(3) Altitude shall not 1,000m;
(4) Free of conductive dust, explosive gas and corrosive gas around the furnace;
(5) No evident vibration or bumps;
(6) Inlet water temperature: +5°C ~35°C; water quality: hardness shall not exceed 10-degree; total solid content shall not exceed 300mg/L, PH: 7-8.5;
(7) 3-phase power-supply voltage fluctuation shall not exceed ± 5%.
- Q:What is the difference in structure between industrial furnace and boiler?
- At the same time, the working environment is relatively poor, the structure should be sturdy and durable, the transfer mechanism (generally) to stable and durable low failure rate, the insulation layer must be thick enough and the economy, the steel structure housing materials used to be enough.
- Q:What are the advantages of a vacuum furnace?
- The utility model can completely eliminate the oxidation and decarburization of the workpiece surface in the heating process, and can obtain clean surfaces without deterioration layers. For cutting tools that grind only one side of grinding (such as twist grinding, the surface of the groove surface is exposed to the blade directly), the cutting performance is greatly improved.
- Q:What's the role of anchor bricks in industrial furnaces?
- Anchorage brick is a new type of anchor brick relates to an industrial furnace, in particular to anchor brick of an industrial furnace roof, including column hanging end and the anchor structure, opened in the anchor on the surface of the spacing of the grooves in the anchor on at least one surface is arranged along the length direction ribs is provided with ribs, the ribs of the reinforcement and anchorage tension, tensile and flexural strength was obviously improved, the stress generated in the groove at the bar at the barrier can not continue to transfer, so the anchor brick of this kind of structure is not easy to break.
- Q:Should the industrial furnace shell cool down?
- Normally, the furnace shell temperature of an industrial furnace is below 50 degrees, so there is no need to cool down.
- Q:Selection of heat preservation material for industrial furnace
- Ceramic fiber blanket can be used.Ceramic fiber blanket color white, regular size, set fire, heat insulation, insulation in one. Free from any binding agent.
- Q:What is an industrial furnace pit?
- In twentieth Century 50s, coreless induction furnaces were developed rapidly. Later, electron beam kilns, using electron beams to impact solid fuels, strengthen the surface to heat and fuse materials with high melting point.
- Q:What is the difference between industrial furnace masonry and ordinary masonry?
- Of course, the difference is like the difference between a hog cap and a 100 story building. See the industrial furnace manual.
- Q:Brief introduction to repair of industrial furnace
- Compared with other equipment, industrial furnace repair has many characteristics: more repair times, more maintenance costs, more non-standard equipment and unsafe factors.
- Q:What is industrial furnace masonry?
- Masonry industrial furnaces refers to complete materials such as brick kilns in construction process.
- Q:How to use industrial furnace equipment?
- If it is water cooling furnace door, but also to ensure the smooth flow of pipes, winter pipes are not frozen. When the boiler is in a limited position, the interlocking device for cutting off the power supply shall be provided when the furnace is in and out, and the number of broken wires in the pitch of the steel wire shall not exceed 10%, and the counterweight of the furnace door shall be reliably hung.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Induction Melting Furnace 12T
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords