High Speed Slitting Line for 1-16mm Thick
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 set set
- Supply Capability:
- 100 sets set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of high speed slitting line for 1-16mm thick
As part of our slitting line and cut to length line, this slitting and cut to length combined line is an ideal tool for enterprises that requires different. The dimension of the whole line can be made according to customer’s requirement.
1. Specifications / Technical Data of High Speed Slitting Line for 1-16mm Thick
(1). Coil Thickness:0.3-4mm
(2). Coil Width:300-1800mm
(3). Coil Max. Weight:30 T
(4). Coil I D:φ508-φ800mm
(5). Material: carbon steel plate with σb≤550Mpa、σs≤350Mpa
High speed Slitting and cut to length combined Line
(1).Multi-functional:Shearing and slitting
(2).High precision: +/-0.3mm;
2.Composed devices of High Speed Slitting Line for 1-16mm Thick:
(1). Entry coil car,
(2). Uncoiler,
(3). Slitter,
(4). Scrap coiler,
(5). Tension unit,
(6).Shearing Machine , etc.
For the user with higher requirement, uncoiling with automatic edge aligning or centering is preferable, which has the advantage of easy.
EPC automatic edge control can be adopted as well, which can guarantee recoiling in tidiness, especially for the wider recoiling.
3.Uncoiling Unit of High Speed Slitting Line for 1-16mm Thick
(1). Several coils can be preplaced on the loading station to improve working efficiency.
(2).This uncoiling unit of our slitting line adopts a hydraulic collapsible drum, which does no harm to the sublayer of the material. It is capable of carrying out tensile uncoiling or manual material unloading, which effectively prevents the material from deflecting and scraping.
(3). Both single head and double head type uncoiling units are available.
4.Leveler of High Speed Slitting Line for 1-16mm Thick
Supporting roller type plate leveling machine. Leveling Roller material: GCr15 quenching, hardness HRC58-62
5.Slitting Unit of High Speed Slitting Line for 1-16mm Thick
It is used to slit steel coil to narrow strips with high processing speed and accuracy.
(1).The slitting head arbors are fixed in eccentric sleeves. The slitting angle remains unchanged if the blade has just been polished.
(2). This slitting line has two slitter heads. While one is running on line, the setting up can be done on the other, which can greatly eliminate production down time. As a result, this slitting line carries out slitting and blade changing simultaneously. This greatly increases the working efficiency.
(3). Hydraulic locknuts could be used for higher blade positioning precision.
6.Processing flow of High Speed Slitting Line for 1-16mm Thick:
carry coil→load coil→de-coiling(pressing guide +opener)→entry rough level→cutting→transition→guide→slitting (waste winding) →looping storage→pre-separating, damping→recoiling →packing→discharging→guide→leveling→fix size (end plate feeding)→cutting→discharging
7.Note of High Speed Slitting Line for 1-16mm Thick:
All the specifications and components of our slitting machine could be customized upon request.
As a professional slitting line manufacturer and supplier, We are able to offer slitting lines, cut to length lines, leveling machines, CNC drilling.
More details, please contact us.
- Q:Slitting machine; batten; place
- Make sure that the metal slitting machine production line connecting line is correct, is to give the metal slitting machine electricity, electricity will not free after the electric door opened, and a hand to touch the electrical files to prevent electric shock hurts, and when the operator of the machine in the operation of metal to concentrate.
- Q:What is the function and classification of the slitting machine?
- Its main function is to cut wide volume material in the direction of length into narrow, certain size coil, as a separator, can be divided into a variety of
- Q:Slitting machine, pc0.8 mm coil, why have rough edges?
- Check whether the matching sensor device is connected properly at frist.
- Q:The belt machine used for gluing buckles lacks power
- The main reason is that the ignition advance angle is incorrect, the fuel pressure is too low, the intake system leaks, the throttle position sensor or air flow meter fails, the injector is not working well, and the EGR system is not working well.
- Q:The technique of arranging knives in a slitting machine
- Fixed length slitting control is divided into two types: static and dynamic cutting.
- Q:How to adjust the pearl cotton separator?
- Adjust the conveyor belt, arbitrary adjustment of one, so that the pearl cotton tape machine with the film roll paper side of the drilling alignment;
- Q:Is the tape on the tape slitting machine a good one at the back or a good one in front?
- In fact, the same, the knowledge of how the machine forward, the switch is generally in front or side
- Q:Slitting machine, slitting machine looper (pit cause analysis) in the strip of varying lengths
- Relatively thin thickness of the strip, less winding diameter, winding speed is relatively small. This resulted in different lengths of strip pit the phenomenon.
- Q:Why does a bar break occur in a bar splitting machine?
- As a result of burr and bending: vertical cut due to the blade gap adjustment is not correct, so that the burr larger, when the volume of the edge due to burr, equivalent to the larger thickness of the plate, resulting in edge stretching and bending.
- Q:What is the relationship between the arrangement of metal bars and the material thickness of the strips?
- The width of the material determines the size of the separator, but the thickness is related to the configuration of the metal separator
1. Manufacturer Overview |
|
---|---|
Location | Shanghai, China |
Year Established | 1997 |
Annual Output Value | US$ 2.5 Million - US$ 5 Million |
Main Markets | South America Eastern Europe Africa Oceania Mid East Western Europe Northern Europe Southern Europe South Asia |
Company Certifications | ISO 9001:2000 ISO 9001:2008 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shanghai |
Export Percentage | 21% - 30% |
No.of Employees in Trade Department | 3-5 People |
Language Spoken: | Chinese, English |
b)Factory Information | |
Factory Size: | Above 2000 square meters |
No. of Production Lines | Above 10 |
Contract Manufacturing | Design Service Offered |
Product Price Range | Average |
Send your message to us
High Speed Slitting Line for 1-16mm Thick
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 set set
- Supply Capability:
- 100 sets set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords