Concrete Mixer Truck 8m3
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Unit unit
- Supply Capability:
- 1000 Units per Month unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Name: Concrete Mixer Truck 8m3
1. Product Feature of Concrete Mixer Truck 8m3
1). Double Logarithmic Variable Pitch Helical Mixer Blade enables higher charging and discharging speed and equal mixing, eliminates segregation phenomenon, and is suitable for the transportation of both dry and wet materials;
2). New technology T-shape Blade. It is made of hard-wearing alloy steel, and thus protects the mixer blades from abrasion, extends the service life of the agitator drum, and enhances mixing performance;
3). The geometric capacity of the agitator drum is very large and the filling rate is low, thus guaranteeing more mixing space. The small inclined angle and low center of gravity help reduce the possibility of turning over;
4). Closed loop hydraulic system and constant hydraulic oil temperature controller are used. Key hydraulic accessories include: Hydraulic plunger pump, adjuster mechanism with servo, hydraulic motor, and planetary reducer are all made by internationally known brands and offer stable and reliable performances;
5). Pneumatic Water Supply System. The pressure is provided by the air tank on the chassis with pressure protection devices. The water inlet connector fits for both normal water pipe and fire fitting;
6). Multi-outlet washing design. Cleaning requirements are met by the three fixed pipes for washing the agitator drum, charging hopper and discharging hopper respectively, and another flexible water outlet;
7). Three-Point Operation System. One in the cab to allow control of the agitator drum, to turn forward and reverse, and to perform the "feed", "discharge", "agitate" and "stop" functions. Two at the rear with one operation handle at each side to perform "charge", "accelerate", "discharge", "agitate" and "stop". Three are interlocking;
8). The milky white upper-fixing looks bright and pleasing with blue decorations on the agitator drum. Colors can be customized according to customer's requirements.
Note: Truck Chassis Options: SINOTRUK, SHACMAN, DONGFENG, FOTON, HINO, NISSAN etc.
2. Specification of Concrete Mixer Truck 8m3
Overall Dimensions(L*W*H) | 9230*2496*3850mm |
Kerb Mass(Kg) | 13345 |
Chassis Model | SINOTRUCK HOWO ZZ1257N3848W |
Engine | WD615.95E,336 HP,EGR engine |
Axle Base(mm) | 3825+1350 |
Transmission | HW15710 |
Axle | HC16 Axle,The main speed ratio 5.73 |
Braking System | Service brake: dual circuit air pressure brake
Parking brake: energy storage spring air-cut brake
Auxiliary brake:
Engine exhaust brake |
Tyre | 12.00R20,10 pieces |
A/C | Yes |
Cab | HW76 Flat roof , single sleeper, be overturned |
Mixing Tank Capacity (m3) | 8 |
Hydraulic System(Imported) | ZF P-4300 Reducer; SAUER T90PV075 High-pressure oil pump; SAUER T90MF075 Hydraulic Motor |
Radiator | KAITONG Brand, Capacity: 26L |
Water Supply System | Water tank capacity: 600L Air pressure water supply; Homemade sprinklers |
3. Delivery of Concrete Mixer Truck 8m3
This model could be shipped by Bulk Vessel or Roll-on roll-off vessel.
4. Primary Competitive Advantages
1) Brand-name Parts
2) Country of Origin
3) Competitive Price
4) Good Product Performance
5) Prompt Delivery
6) Quality Approvals
7) Good Reputation
8) Expedite Communication
9) Good Packaging
10) Distributorships Offered
11) One Step Service
12) Good Quality Service
13) Small Orders Accepted
14) Overseas Service Branches
- Q:How the concrete mixer works
- Mixed mortar mixer working principle of the machine work, inside the machine material subjected to two opposite direction of the rotor, with complex movement, the blades to drive the material aspects of tank wall along the machine counterclockwise, on the one hand, drive material turning around, overlapping the two rotor shape floating zone, within the region, regardless of the shape of the material, size, and density, can make material floating instant weightlessness, which makes the material in the machine groove omni-directional continuous loop turn, staggered shear each other, so as to achieve the effect of rapid mixing soft. Vacuum mixer manufacturer said, dual-axis mixer for continuous mixing of materials, mixing and conveying function, its working process is: the motor after electrify, through a triangle belt transmission, the big belt wheel rotation, through controlling the clutch into the working state, drives the stirring shaft of two relative rotation, the direction of the two shaft rotates by outside introversion, material is stirred up, formed by mixing blade rotates thrust material flow, spiral forward, into the mixing of the material for stirring, mixing, extrusion, homogenization, the final material to undertake by the leak container into the belt, and finally to the next processing equipment. The mixing of the material in the mixing tank shall be determined mainly by the Angle of the stirring and the Angle of the axis and the speed of the shaft.
- Q:Is the concrete mixer and mortar mixer a machine
- A concrete mixer is a machine that mixes cement, gravel and water into concrete mixtures. It consists mainly of mixing, loading and unloading mechanism, water supply system, original motive, transmission mechanism, frame and supporting device. Including through shaft connected to the drive motor structure dynamic mechanism and driven by the driving mechanism of drum, the drum cylinder jacket around the cylinder cylinder gear ring set, set with the ring gear meshing gear on the shaft. The utility model has simple structure, reasonable, the use of mesh gear, gear ring, which can effectively overcome the fog had, between the roller and the mixer drum skid phenomenon; The driving mechanism can further assure the skidding between the roller and the mixer. Works: make each composition on the macro and micro evenly, destruction of cement particle reunion phenomenon, promote the development of dispersion phenomenon, initial water damage of cement particles on the surface of the compound film wrapping layer, prompting particle collision between friction materials, and reduce the influence of dust membrane, improve the mix of each unit body to participate in sports frequency and trajectory of the crossover frequency, acceleration and qualitative.
- Q:How to safely use concrete mixer
- A concrete mixer is a machine that mixes cement, gravel and water into concrete mixtures. It consists mainly of mixing, loading and unloading mechanism, water supply system, original motive, transmission mechanism, frame and supporting device. Operating procedures Before stirring, the car should be run in an empty car. Adjust the timing of the relay according to the stirring time. Water moistening the mixing bowl and the blade and the ground. The process, such as electrical or mechanical fault, should be discharged from the part of the mixing material, lighten the load, remove the fault and then drive again. When operating, the operation should be checked regularly to prevent safety accidents such as electrocution and mechanical injury. Finish the experiment, turn off the power supply, clean the mixing drum and the ground and clean up the cleaning.
- Q:For example, what is the more detailed and better td-50 td-80 td-60
- Concrete mixer points generally mixer and forced mixer, currently used in engineering is forced, the difference is that the former is the shell in turn, the latter is in inside agitation. The most commonly used parts of a strong mixer are: hoisting bucket wheel, mixing arm, blade, hopper limiter, liner. Normally the mixing arm, blade, and lining plate for the vulnerable parts, should be replaced in time during construction.
- Q:250 litres of the blender once made concrete
- 250-litre agitator is measured at a time of 0.25 m3, which is about 80% of the amount in real time, avoiding mixing and mixing
- Q:How long will it take for a concrete mixer to beat ten square?
- 1, 2 square, each time you can mix 1 square, top material, stirring, material for about 10 minutes, (depending on the material speed), 10 square about 100 minutes
- Q:Concrete mixers need to be aware of which things
- The concrete mixer should be set in a flat position, and the wheel shaft will be placed on the back and back of the square, so that the tyre should be set up so that it will not move during the run. 2, the concrete mixer should be protected by secondary leakage, and after the power connection is put on before work, it must be carefully checked, and it will be used only if it is considered qualified by the empty car test. Commissioning should check when mixing drum speed whether appropriate, under normal circumstances, the proportion of empty car speed car was faster (after loading) 2 ~ 3, such as the difference is more, should adjust pulley and the proportion of the driving wheel. The rotating direction of the mixing cylinder shall be in accordance with the direction of the direction of the arrow, if it is not true, the motor connection shall be corrected. 4, check whether the transmission clutch and brake is flexible and reliable, wire rope is damaged, track pulley are in good condition, surrounded by accessibility and lubrication situation of each part. After turning on the machine, it is often noted that the parts of the concrete mixer are working properly. When stop, check whether the concrete mixer blade is bent and the screw is loose or not. 6, when the completion of concrete mixing or pause is expected to more than 1 h, besides excess stock out of the net, the application of stones and water to pour into shaking inside the cylinder, turn on, put the glue on the cylinder of the mortar all discharged after rinse. No water is allowed in the cylinder in case the cylinder and blade are rusted. It should also clean up the outside of the mixing cylinder to keep the machine clean. 7, after work and stop after work, should pull off power without power, and lock switch box, to assure safety.
- Q:Where can a concrete mixer be used?
- Tile is widely used in home outfit sand, sand pavement tiles grey ash stirring, the botanical garden engineering sand ash mixing, floor concrete mixer, small site masonry mortar and plaster mortar mixing sand dust, electricity, communications and other field operations, seedling fertilizer mixing, family wine could stir scenario. Small mixer is widely used in municipal engineering, small water conservancy projects, rural construction, building decoration, electrical, communications engineering, mountains of bad environment, leisure agriculture, scarification, weeding, etc.
- Q:What is the type of concrete mixer?
- There are 250, 350, 500 and so on, and the model is for his capacity. Is that satisfactory?
- Q:What is the difference between a concrete mixer, a JL type and a JW type?
- The jw-375 concrete mixer is a turbo-reinforced concrete mixer, which is used for hard and semi-dry concrete. The main body of this mixer consists of the frame, the feeding system, the mixing system, the water supply system, the control device and the transmission mechanism.
1. Manufacturer Overview |
|
---|---|
Location | Luoyang,henan |
Year Established | |
Annual Output Value | ¥25 billion |
Main Markets | China;Southeast Asia;Middle East;Russia;Africa;South America |
Company Certifications | ISO9001;GOST;CCC |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Tianjin |
Export Percentage | 0.35 |
No.of Employees in Trade Department | 5 |
Language Spoken: | English |
b)Factory Information | |
Factory Size: | 500acres |
No. of Production Lines | 10 |
Contract Manufacturing | OEM Service Offered |
Product Price Range | ¥350000-450000 |
Send your message to us
Concrete Mixer Truck 8m3
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Unit unit
- Supply Capability:
- 1000 Units per Month unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords