Color Steel Compact Pressure Thermal Solar Heater
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Non-Pressure Solar Water Heater:
Non-pressure Solar Heater is one of the most economical solar water heating device with pretty high efficiency at the same time. It consists of hot water storage tank, solar vacuum tubes with mouth plug in storage tank, and bracket supporting tank and tubes.When cold water in evacuated tubes is heated with solar irradiation, as the specific gravities of hot water and cold water are different, hotter water goes upward to storage tank and colder water goes downward to glass tubes. through this continuous circulation, the cold water in storage tank will be gradually heated till sunset.
Specialty:
1. High thermal performance and working temperature: the heat exchanging rate even in winter can up above 55%.
2. Heat collecting efficiency is at least 20% above common solar systems.
3. Work in all day and all season: no matter any corner of the world, this system can work well even -40℃ to avoid the tube freezing problem.
4. Reliability: No water following through the tube, so water scale can not generate and tube cracks could be avoided, the system still can keep working even with some damaged tubes.
5. It can connect with water tap and work automatically with pressure0.6Mpa, bring enjoyable washing experience.
6. Safety: P/T valve would release pressure and temperature to protect tank..
Technical Specification:
1. Outer tank material: SUS304 stainless steel or powder coated color steel
2. Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
3. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
4. Frame material: 1.2mm thickness stainless steel
5. Insulation material: 55mm thickness polyurethane
6. Suitable for mains pressure water(up to 8 bar/116psi)
7. Easy plug-in installation
8. Install the T/P valve on the pressurized tank
9. Seal material: Stabilized High Temperature Silicon
Outer tank material: SUS304 stainless steel or powder coated color steel
Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
Frame material: 1.2mm thickness stainless steel
Insulation material: 55mm thickness polyurethane
Suitable for mains pressure water(up to 8 bar/116psi)
Easy plug-in installation
Install the T/P valve on the pressurized tank
Seal material: Stabilized High Temperature Silicon
19. Vacuum Tube | 20. Size (mm) | 21. Φ47*1500 / Φ58*1800 / Φ70*2100 | |||||
22. Tube (pcs) | 23. 10 / 12 / 15 / 18 / 20 / 22 / 24 / 30 / 36 / 42 | ||||||
24. Material | 25. Borosilicate 3.3 glass, magnetron spluttering selective coating | ||||||
26. Coating | 27. Single-target AL-N/AL or Three-target AL/N-Cu-SS | ||||||
28. Water Tank | 29. Capacity | 30. 80L ~ 500L for hot water storage tank | |||||
31. Inner tank | 32. Food-grade stainless steel SUS304-2B / SUS316 | ||||||
33. Insulation | 34. High-density polyurethane foam with 70~80 hour heat preservation | ||||||
35. Tank shell | 36. Food-grade stainless steel SUS304-2B | ||||||
37. Bracket | 38. Shaped strong aluminum alloy structure adaptable for flat or slope roof | ||||||
39. Accessories | 40. Anti-aging silicon seals, Dustproof seals, Air-vent cap, Stainless screws | ||||||
41. Auxiliary Devices | 42. Assistant tank, Intelligent controller, Electrical heater, Magnesium anodes | ||||||
43. Tilt Angle | 44. 25 ~ 50° | ||||||
45. Water Output | 46. 45 - 95°C | ||||||
47. Hail Resistance | 48. Φ25mm diameter | ||||||
49. Model Number | 50. Solar Vacuum Tube | 51. Tank 52. Liter | 53. System 54. Liter | 55. Container Loading Qty /sets | |||
56. Size /mm | 57. Qty /pcs | 58. 20GP | 59. 40GP | 60. 40HQ | |||
61. VNS-58SA12-100 | 62. Φ58*1800 | 63. 12 | 64. 100 | 65. 132 | 66. 58 | 67. 119 | 68. 140 |
69. VNS-58SA15-130 | 70. 15 | 71. 130 | 72. 170 | 73. 54 | 74. 108 | 75. 131 | |
76. VNS-58SA18-150 | 77. 18 | 78. 150 | 79. 198 | 80. 43 | 81. 86 | 82. 105 | |
83. VNS-58SA20-170 | 84. 20 | 85. 170 | 86. 223 | 87. 40 | 88. 80 | 89. 97 | |
VNS-58SA24-200 | 24 | 200 | 263 | 35 | 70 | 85 | |
VNS-58SA30-250 | 30 | 250 | 329 | 28 | 56 | 68 | |
VNS-58SA36-300 | 36 | 300 | 395 | 23 | 47 | 57 |
Products Show
Our Services
1. OEM service
2. Warranty: 5 years
3. Considerable after sale service
Color steel Compact pressure Thermal solar heater
FAQ:
1. What’s the delivery time?
10 days after receiving deposit.
2. How long is the warranty?
5 years for whole system, 1 year for accessory
3. What’s your production capacity?
6000sets/month
4. What’s the MOQ?
1 set.
5. What’s your payment term?
Container: 30% T/T in advance for deposit, 70% T/T before shipment for fist order.
70% T/T after seeing copy of B/L from second order
Sample: 100% T/T in advance
Other choices: L/C at sight.
6. What certifications do you have?
CE, SOLAR KEYMARK, SRCC and etc.
- Q:Types of solar water heaters
- Classification from structureThe utility model is characterized in that the vacuum glass tube is directly inserted into the water tank, and the water temperature of the water tank is increased by using the heating water circulation. Is also the most popular. Only the top layer can be used to change the type of water heater, unless the top user and the relationship between your downstairs special iron, and the roof area is limited. Split type water heater: split type: the solution is not the top users can also use solar water heaters. Split cycle 2, a water on the natural circulation, the heat exchange efficiency is low, can not meet the requirements of water; a pump circulation heat exchange, to solve the problem of low efficiency of natural circulation, pump circulation, can significantly improve the water heat exchange
- Q:What is the difference between an active and passive solar water heater?
- The main difference between an active and passive solar water heater is the way in which they circulate the water. An active solar water heater uses a pump or other mechanical device to circulate the water through the system, while a passive solar water heater relies on natural convection to move the water. This means that an active system requires external power to function, whereas a passive system operates without any mechanical components.
- Q:What is the difference between a passive and active solar water heater system?
- A passive solar water heater system relies on natural processes such as convection and gravity to circulate water through the system, while an active solar water heater system uses pumps or other mechanical devices to move water.
- Q:How long does it take for a solar water heater to heat up water?
- The time it takes for a solar water heater to heat up water can vary depending on several factors such as the size of the system, the amount of sunlight available, and the initial temperature of the water. Generally, it can take anywhere from a few hours to a full day for a solar water heater to heat up water to the desired temperature.
- Q:What is the expected lifespan of solar water heater components?
- The expected lifespan of solar water heater components varies depending on the quality of the materials used, maintenance practices, and environmental factors. On average, well-maintained and high-quality solar water heater components can last between 15 to 20 years or even longer.
- Q:Are there any disadvantages of using a solar water heater?
- Yes, there are a few disadvantages to using a solar water heater. Firstly, the initial cost of installing a solar water heater can be higher compared to conventional water heaters. Additionally, the efficiency of a solar water heater can be affected by factors like weather conditions, location, and shading. This means that in areas with limited sunlight or during cloudy days, the performance may be reduced. Furthermore, solar water heaters require ample roof space for installation, which may not always be feasible for every household. Lastly, the maintenance and repair costs of solar water heaters can be higher compared to traditional systems.
- Q:How does a solar water heater impact water heater noise levels?
- A solar water heater typically reduces water heater noise levels as it relies on passive solar energy instead of a noisy combustion process or electric heating elements.
- Q:Solar energy or electric water heater for domestic hot water
- The collector and the solar water heater tank needs to be installed on the roof, the open area can be normal lighting position, generally small high-rise and high-rise building users only near the top of households have installed conditions of the solar water heater, or ordinary residents of households.
- Q:What are the safety precautions to consider when installing a solar water heater?
- When installing a solar water heater, there are several safety precautions to consider: 1. Electrical Safety: Ensure that all electrical connections are properly insulated and grounded to prevent electrical shocks. Use a licensed electrician for the installation and follow local electrical codes. 2. Structural Integrity: Make sure the roof or area where the solar water heater is installed can safely support the weight of the system. Reinforce the structure if necessary to avoid any accidents or damage. 3. Hot Water Scalding: Install a temperature and pressure relief valve to avoid overheating and pressure build-up, which can lead to scalding injuries or damage to the system. Additionally, consider installing anti-scald devices on faucets and showerheads. 4. Proper Ventilation: If the solar water heater uses a gas or fuel-powered backup system, ensure proper ventilation to prevent the buildup of harmful gases such as carbon monoxide. Follow manufacturer's guidelines for ventilation requirements. 5. Freeze Protection: If you live in an area prone to freezing temperatures, install freeze protection measures like insulation or antifreeze solutions to prevent water or system damage during cold weather. 6. Adequate Space: Allow sufficient space around the solar water heater for easy access during installation, maintenance, and repairs. This will ensure safe handling and prevent accidents. 7. Compliance with Local Codes: Adhere to all local building codes and regulations for solar water heater installations. Obtain any required permits and inspections to ensure compliance and safety. Remember, if you're unsure about any aspect of the installation process, it's always best to consult a professional solar water heater installer to ensure proper safety measures are taken.
- Q:What is the role of the solar water heater's reflector
- Solar vacuum heat collection tube, because of installation, sealing and other reasons. It can not be arranged closely
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Color Steel Compact Pressure Thermal Solar Heater
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords