Air Evacuation Valve with Solar Water Heater Exhaust Valves and Solar Water Heater Parts on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q:Hydrant valve leaks, how do you close other valves? Specific steps?
- Hello my name is Baidu know the long days of high water leakIn the vicinity of a common fire hydrant, there is a valve, which is convenient for fire hydrant maintenance, because fire hydrant repairs need to close the water source. Look around, it should be easy to find the valve. Switch valve is very simple, and the direction of the twist screw is the same, clockwise turn off, counterclockwise is open. Closed valve, fire hydrant will not leak, you can feel relieved to repair. I guess your fire hydrant is sealed rubber pad, aging causes leakage, it is a common disease of fire hydrants.
- Q:Valve legend
- F means the initial letter of the valve, which is shown as a stop valve
- Q:What are the valve types H, F, and Y? What are the meanings of these 3 letters?
- Please refer to "JB/T308-2004 valve model preparation method"Sealing surface material codeH Cr13 stainless steelF fluoroplasticY cemented carbide
- Q:What is the KVS in the valve parameter?
- KVS meaning in valve parameters:Kvs is the coefficient of flow (also called circulation capacity).Kvs refers to both ends of the valve pressure difference of 0.1MPa, water density of 1g/cm^3, when the valve fully open flow. It is an important parameter of the control valve, reflecting the capacity of the control valve.Flow coefficient is a unit of time, in the test conditions, the pipeline to maintain a constant pressure, pipe flow through the valve mass flow, or mass flow. That is, the maximum flow capacity of the valve. The greater the value of the flow system, the smaller the pressure loss when the fluid passes through the valve. The CV value of the valve shall be determined by test and calculation.
- Q:What's the material of j41h-16p's valve?
- The j41h-16p valve is a stainless steel globe valve.The working principle of stop valve:The cut-off valve, also called the door, is the most widely used as a valve, it is popular is because the process of opening and closing the sealing surface friction between the small, more durable, highly open small, easy manufacture, convenient maintenance, not only for low pressure, but also suitable for high pressure.The closing principle of the valve is to rely on the valve bar pressure, so that the valve sealing surface and seat sealing surface close together, to prevent the circulation of media.The one-way valve can only medium flow direction when installing. The structure length of the stop valve is larger than that of the gate valve, and the fluid resistance is large, and the reliability of the sealing is not strong during the long-term operation.
- Q:What's the difference between a valve and a valve?
- In fact, the difference is that a set of valves, including two flanges, bolts, flange pad belongs to a set. A valve just doesn't carry those things.
- Q:Which valves are installed in a directional manner?
- There are balance valve, safety valve, pressure relief valve
- Q:Ketem valve relative to other valve companies in the industry what are the advantages?
- Floating hard sealing electric ball valve is suitable for two cutting and adjusting occasions. Connect the valve and actuator by using direct connection, DCL series miniature electric actuator (also can be configured according to user requirements of the electric actuator or pneumatic piston actuator of different types of electronic components and ultra short ball).
- Q:What are the specifications of the valves PN25, DN50?
- PN25 - nominal pressure 25bar (25kgf/cm -)DN50 - nominal diameter is 50mm (2)
- Q:What is a lift rod valve?
- The valve stem and valve plate are relatively fixed, and the valve stem rises up when the valve plate is raised
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Air Evacuation Valve with Solar Water Heater Exhaust Valves and Solar Water Heater Parts on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords