Wexan Pipes

Hot Products

Glass Wool insulation

Glass Wool for Roofing and Partition Wall

Mineral Wool for Roofing and Partition Wall

One-layer Real Al Foil Bubble Fire Retardant Insulations

AL+CPE+One Layer Bubble Foam For Insulation

Mineral Wool for Roofing with Thermal Insulation

Real Aluminum One-layer Bubble Foam for Insulation

Al Laminated with CPE Two-Layer Bubble Foam for Insulation

AL+PET+PE+One Layer Bubble Foam For insulation

Glass Wool PVC faced

FAQ

nan

Sound insulating cotton

nan

Glass fiber is an organic material, so it will not do harm to people under general circumstances. However, because it is organic, the glass fiber contains substances that are harmful to people. Therefore attention should be paid to safety when using it.

nan

Rock wool board should be pasted from the bottom up, in the horizontal direction it should be pasted from corners to windows to the sides; during pasting, it should be squeezed paste softly and evenly, internal and external corners should be rubbed and lapped; after finishing pasting, then check the flatness and perpendicularity with a 2 m ruler; rock wool board should be re-pasted if the tolerance is too large(the error is greater than 2 mm); when pasting around door and window openings, complete rock wool board should used, and the patchwork of rock wool board can not just be in the corners of window and door openings. Rock wool board pasted to corners should exceed the minimum size of 200 mm. I hope my answer help you.

nan

In fact, it is very simple. Glass wool is processed from glass (silicon?dioxide) , while rock wool is made from basalt or diabase through high temperature refining equipment, which are two completely different products. Hope it is helpful.

nan

Glass cotton is the general term of fibrous silicate minerals which can be split into long and narrow flexible fibers. Glass cotton are manufactured to meet the requirement of large-area pave, apart from the unique thermal insulation property, they are good at fireproofing, shock and sound absorption which help to reduce noise pollution, and improve working environment. The thickness of rock wool board : 40 to100 mm. The unit weight is 80 to 150kg / m?. Glass wool can be processe into different products. The thickness: 25 to 100mm. The unit weight is 30 to 80kg.

nan

Almost the same. It should be used universally.

nan

Fix with pins

nan

1, The construction condition. 1.1, The substrate must be dry and be passed acceptance inspection. 1.2, The construction site should be granted with no more than five grade of wind force during construction. 1.3, Effective measures should be taken during construction in rainy days to prevent glass wool from being wetted by rainwater. 2, the main construction tools: wllpaper knife, electric screwdriver and fe, electric screwdriver and 2m guiding rule. 3, Construction process. 4. Construction points. 4.1, Construction preparation: 4.1.1, Material preparation: Prepare the detailed supply planned order of materials according to the drawings and projects condition. All materials approved into the site must be qualified products, complying with the relevant regulatory requirements nationally, industrially and locally. 4.1.2 Construction machinery: All machinery must be tested to ensure their good performance. 4.1.3, Personnel preparation: Technical personnel must be provided with technical training and technical disclosure. 4.1.4, Technical preparation: It needs to know well the drawings, prepare the relevant portfolios and quality acceptance criteria. 4.2 Installation of glass wool. 4.2.1 Select expansion insulation nails with corresponding length according to the thickness of glass wool, and make glass wool into sample plate based on the field condition before installing it. 4.2.3, Using insulation nails screw to pierce glass wool to install them into the wall according to the position of insulation nails on the facade of wall, which requires that glass wool should be assembled tightly and neatly without folds. 4.2.4, All seams should be cling to with each other with the gap of no more 3mm, and finally all seams should be sealed with adhesive tape.