High Quality Construction Fireproof Insulation Rock Wool

High Quality Construction Fireproof Insulation Rock Wool System 1

High Quality Construction Fireproof Insulation Rock Wool

Ref Price:: $5.00 - 10.00 / m²

Loading Port:: Tianjin

Payment Terms:: TT or LC

Min Order Qty:: 10000 m²

Supply Capability:: 100000000 m²/month

Inquire Now

Add to My Favorites

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

High Quality Construction Fireproof Insulation Rock Wool

1.Structure of High Quality Construction Fireproof Insulation Rock Wool：

Rock wool insulation refers to a type of insulation that is made from actual rocks and minerals. It also goes by the names of stone wool insulation, mineral wool insulation, or slag wool insulation. A wide range of products can be made from rock wool, due to its excellent ability to block sound and heat. This type of insulation is commonly used in building construction, industrial plants, and in automotive applications.

The Manufacturing Process

Melting / Forming into fibers /Continuous-filament process/Staple-fiber process/ Chopped fiber/ Rock wool / Protective coatings /Forming into shapes

2.Main Features of High Quality Construction Fireproof Insulation Rock Wool：

● FEATURES

Thermal Insulation

Fire Safety

Acoustic Control

No Corrosion

Environmental friendly

Moisture Resistance

Energy Conservation & Emissions Reduction

Different raw material: Our rock wool is mainly made by Basalt and other natural ores. The raw material for other so-called rock wool is mineral slag. Different raw material, different features.

Different corrosion resistance. Our rock wool have good corrosion resistance. non-corrosive for metal. But the mineral slag wool is different. In high humidity environment, CaS in mineral slag will have chemical reactions and produce corrosive when contact with metal.

Different working life. The working life for mineral slag is very short and Durability is very low because of higher CaO and MgO in slag. The efflorescence for mineral Slag is easy and also effect the working life. The

Different heat resisting. The heat resisting for rock wool(Basalt) is higher than mineral Slag wool. Our operating temperature can reach 800℃.But for Slag wool ,can not higher than 675℃.The features for our rock wool is totally superior to Slag wool.

3. High Quality Construction Fireproof Insulation Rock Wool Images

High Quality Construction Fireproof Insulation Rock Wool

4. High Quality Construction Fireproof Insulation Rock Wool Specification

ROCK WOOL BLANKET & BOARD

Standard Size

Product Blanket Board

Density (kg/m3) 60-100 40-200

Size: L x W (mm) 1200X3000-6000 600X1200

Thickness (mm) 30-150 30-100

Remark:

Other sizes are available upon request.

Facing materials can be applied upon request.

Standard Size

Product Blanket Board

Density (kg/m3) 60-100 40-200

Size: L x W (mm) 1200X3000-6000 600X1200

Thickness (mm) 30-150 30-100

Remark:

Other sizes are available upon request.

Facing materials can be applied upon request.

Rock wool PIPE

Standard Size

DIA Thickness (mm)

inch mm 25 30 40 50 60 70 80 90 100 120 150

1/2’’ 22 ● ● ●

3/4’’ 27 ● ● ● ● ● ● ●

1’’ 34 ● ● ● ● ● ● ●

1-1/4’’ 43 ● ● ● ● ● ● ● ● ●

1-1/2’’ 48 ● ● ● ● ● ● ● ● ●

2’’ 60 ● ● ● ● ● ● ● ● ●

2-1/2’’ 76 ● ● ● ● ● ● ● ● ●

3’’ 89 ● ● ● ● ● ● ● ● ●

3-1/2’’ 108 ● ● ● ● ● ● ● ● ●

4’’ 114 ● ● ● ● ● ● ● ● ● ●

5’’ 140 ● ● ● ● ● ● ● ● ● ●

6’’ 169 ● ● ● ● ● ● ● ● ● ●

8’’ 219 ● ● ● ● ● ● ● ● ●

10’’ 273 ● ● ● ● ● ● ● ● ●

12’’ 325 ● ● ● ● ● ● ● ● ●

14’’ 356 ● ● ● ● ● ● ● ●

15’’ 381 ● ● ● ● ● ● ● ●

16’’ 406 ● ● ● ● ● ● ● ●

18’’ 456 ● ● ● ● ● ● ● ●

19’’ 483 ● ● ● ● ● ●

20’’ 508 ● ● ● ● ● ●

22’’ 558 ● ● ● ● ●

24’’ 610 ● ● ● ● ●

5.FAQ

We have organized several common questions for our clients，may help you sincerely：

① What’s the mainly material for rock wool？

Rock wool is called a mineral wool because it is made primarily from basalt, an igneous rock,

②What’s the mainly type for rock wool？

rock wool insulating products are available in loose-fill form and as batting. Batts, or blankets, are thick slabs of insulation that may have a kraft paper facing.

③How you control the quality?

During the production of fiberglass insulation, material is sampled at a number of locations in the process to maintain quality.

Q:Would it be worth forwarding the offer to the client? Is the difference that substantial?: You don't want that. If he offers 3.5 instead of the required 3, that is a different story. Otherwise he should give you more material thickness to provide an equivalent R of 3. Yes, the difference can be substantial and I wouldn't forward it to the client. The smaller the R value of the entire roof sandwich the larger the difference it makes. Like the change from 5 mpg to 4 mpg is a 25% worsening in fuel economy, but a change from 100 mpg to 99 mpg is 1%. It will mess up the heating/cooling of the building and the mechanical systems might be inadequate. They could save money on the roof and complain how the building is too hot/too cold or the mechanical systems never shut off and their energy bills are too high.

Q:I am specifically considering the re-roofing of a an older home where rafters were made with 2x4 or 2x6 and the rafter space (and possibly the attic space) does not allow sufficient space for insulation and proper ventilation behind the insulation. The old layers of roofing have to be removed in any event. At this point I am considering applying insulation boards on the existing sheathing and then a new layer of sheathing before the new roofing material. (similar to a SIP: structural insulated panel) The two issues I am concerned with is that the insulation can act as a vapor barrier. Would condensation potentially rot the lower sheathing. How is this avoided in SIP roofing panels? The second issue may be with fire regulations.: Good question and I do not know the answers. For the fire issue, call your local fire department and chat them up. Then call your building inspector and talk with him. If he's been around awhile he may have seen it done before and have some information on how it has worked out or what are must do's.

Q:I've found lots of building forums and general &quot;building advice&quot; columns that go over very high-level pros/cons to choosing roofing material and insulation options, but I want a site where I can see hard costs of ordering each of the materials so I don't have to call up a ton of contractors or dealers. Does such a comparison site exist? Everyone offers quotes, but that takes too much time to apply for quotes to every dealer.I'm specifically interested in knowing what green options I can afford (cotton batting vs. formaldehyde-free fiberglass, etc.).: You could call ABC supply or Norandex Reynolds, they are the biggest distributors I know of. They may have some resources for you.

Q:Can I install rigid insulation between roof decking and shingles on a sloped roof?: No. The shingles are applied directly to the decking (over felt paper). Nailing through rigid insulation will either cause dips from driving the occaisional nail too far, or the shingles won't be nailed down tight and will blow off in the wind. Insulate under the decking.

Q:I have 4 pieces (about 50 sq ft) of odd shaped polystyrene foam insulation between 3&quot; and 4&quot; thick. it's leftover from installing a flat roof. creative ideas anyone?: I'm a bit confused here Andy. If the flat roof needs replacing, when it is removed what is revealed is going to be exactly what you would see if you removed the ceilings. So why consider removing the ceilings if they are ok? When the flat roof is replaced put the insulation in then. Whilst rockwool would have been the material to use there is now roofing insulation board that is much more efficient, 50mm board gives equivalent insulation of something like 150mm rockwool. If the flatroof isn't fitted with suitable vents to keep it ventilated fit them when the roof is done too. The only reason I can see for replacing the ceiling plasterboard is if it hasn't got a vapor barrier ie foil backed board.

Q:I am thinking about getting cavity wall and roof insulation at the moment.But since summer is approaching, I fear that getting the insulation will mean that the house will be very hot at night. (During day time the house will accumulate heat from the sun, and the heat cannot escape).I also fear that the ventilation will be bad and the air in the house will not be as fresh.Any advice please?: Insulation works to keep a home cooler in summer as well as warmer in winter. And the warm months generally mean better conditions for the installation because of less potential moisture, which sometimes forms in uninsulated homes in the freezing cold, being trapped in ceiling and wall cavities. To have your ceiling insulation function properly, attic ventilation is required. This is approx. 1 sq. ft./ clear ventilation to 300 sq. ft. of attic space. More is better than less. You will find your home cooler. Insulation on its own does not change ventilation. This is an air/vapor barrier situation which also should be considered when insulating.

Q:hot because of all the added insulation. Is that what the insulation will do? Someone told me that it will save us on our cooling/heating bills, and that it will be warmer in the winter and cooler in the summer now. Is this true?: Yes, you heard right. If you had no insulation, your air conditioner wouldn't be able to cool the house.

Q:I have a low pitched roof so there isn't that much room up there hands and knees only.I have no eave ventilation but the ventilation is through the front and back of the house through triagle metal caps cut into the wood siding. I already have some R19 in the ceiling joists but was wondering would putting it in the rafters against the plywood holding the shingles also help insulate the living area of the house.: No blowing in some insulation will help but putting insulation against the roof wont help. the attic area is supposed to breath to avoid condensation and overheating. The only thing you would put on the roof side would be to help cooling in summer since the shingles heat up the wood underneath and heats the attic, which then works down through the ceiling.

Q:i have about 200 sq ft of odd shaped polystyrene foam (rigid) insulation between 3&quot; and 5&quot; thick. it's leftover from installing a flat roof on a commercial building. creative ideas anyone? grind it and use it as attic insulation in a home?thanks.: put an AD and sell it as material for Accoustic sound proofing,

Q:Above the trailer roof is a metal pitched roof with no soffit and lots of air-flow. I plan to recess the insulation 6&quot; to allow airflow. There is a suggestion that I need a vapor barrier. If I use a vapor barrier, won’t water collect between the roof and the barrier. I was thinking if using strapping crosswise every 4” to act as a channel for water runoff. Any ideas?: your plan is good ...

1. Manufacturer Overview
Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates
a) Certification Name
Range
Reference
Validity Period

3. Manufacturer Capability
a)Trade Capacity
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range