Flag Pole Stainless Steel

Hot Products

FRP ROD-HOLLOW FRP ROD

FRP FLAG POLE-BIG

Good Quality FRP Lighting Pole

Reinforce Fiberglass LIGHT POLE

FRP Lighting Pole D50

FRP LIGHT POLE-NORMAL

FRP Lighting Pole D40

FRP FLAG POLE-SMALL

FRP Lighting Pole D25

FRP Lighting Pole D20

FAQ

How many kinds of aluminum alloy lamp posts are there? Customers should be about 8 meters or so

In order to ensure the strength, more than 10 meters of the lamp pole should do heat treatment, so that the strength of aluminum alloy lamp pole to T6.

What materials does the supervisor regulate for outdoor street lamp cable sleeves?

Supervision standard is not design specification, nor construction specification, it only stipulates supervision and management behavior. For example, the materials, specifications and models must be in accordance with the requirements of the drawings. What design is, what is in line.

What are the proposals for the rationalization of street lighting maintenance?

Wipe the bulb,The resin is filled with voids between fibers, and the fibers are bonded together to make it a whole. Therefore, the effect of the anti-seepage is mainly borne by the resin. In order to form a compact glass fiber reinforced plastic lining, this paper uses the same resin with the simplified lining as the impervious layer at the joint, and the reinforcing layer adopts the same resin as the winding layer of the tank. Some proper toughening agents and solvents were added into epoxy resin to reduce the viscosity and improve the toughness of frp. In addition, the head and the tank should be cleaned before jointing, joints, including socket, socket and coated glass steel, dry grinding and rough. Before scraping, daub and coating, you should swab the work surface with cotton wool and acetone. On the one hand, it is to remove the grease and paraffin on the inner surface of the glass fiber reinforced plastic lining, on the other hand, it can activate the surface of the glass fiber reinforced plastic, so as to improve the bonding strength. When grinding, be careful not to miss. The quality of the surface treatment is related to the bonding effect between the glass fiber reinforced plastic layer and the tank body. Poor handling often results in cracking, resulting in leakage, so be sure to study the process here

White glass fibre reinforced plastic street lamp pole

Used in Shanghai Baoshan iron and steel works, the quality of low carbon steel, containing less than 0.04% silicon, a bending, die-casting, molding, linear error is almost zero. Design according to level 11 wind resistant requirement, also can resist the earthquake within 8 class at the same time.

6 meters Road pole installation should pay attention to what?

Such as work on a grid platform, boards should be laid in order to prevent the tools and equipment from falling.

8 meter pole foundation, and now the foundation can only be dug to 0.7 meters, how can we stand up the pole, and begged the master to help?

It is recommended to dig deeper 300, plain concrete 1000X1000 pouring

Now the lamp poles of the street lights are all metal. Can we install a small leakage protector for each lamp post?

Through the ground to protect the head from the ground; because the street is too high, ordinary people can not reach the maintenance and change the light bulb is a professional operation only in the blackout, so there is no need to install leakage protection.

The telescopic pole do simple iodine tungsten lamp, the best

The iron pole has the advantages of high strength, weakness: 1. easy to rust corrosion; 2. is three times heavier than aluminum, transportation and installation cost is high; 3. recovery of limited value; 4. can not be used to insert the installation mode; 5. surface treatment monotone.