2 Mm Aluminum Plate

Hot Products

Silicon Carbide Ceramic Foam Filter

Silicon Carbide Ceramic Foam Filters Lower Price

Ceramic Filter Plate 3

Silicon Carbide Ceramic Foam Filters Ductile Iron Casting

Cordierite Ceramic Plate For Sale

Ceramic Filter Plate 4

Alumina Ceramic Foam Filter For Metal Foundry

Ceramic Foam Filter For Foundry

Casting Ceramic Foam Filter For Liquid Filter.

Fiberglass Cloth Welding Blanket

FAQ

What are the causes of the powder moisture in the ceramic filter?

The ore condition has changed, such as high concentration of material, fine grain size and increase of mud content.

The vacuum degree of the ceramic filter is normal and the cake water is large?

The vacuum degree of the ceramic filter is normal at about -0.08MPa. Under normal circumstances, the water content of the filter cake treated with a ceramic filter is about 10%, and the moisture content of the tail filter cake is about 15%. The water content of the filter cake increases with the increase of water content in the ceramic filter.

What's the acid of the ceramic filter plate?

Ceramic filter automatic control system: control system through the metering pump will be concentrated nitric acid automatic mixing ceramic filter plate into nitrate after proportioning through the pipeline, so that it can be dissolved, dredge the blockage in the most microporous ceramic filter plate. This is the ceramic filter plate pickling, pickling, acid dosage should be sufficient as little pickling effect.

Ceramic filter fineness thin mud suction is not what to do more

With ceramic filter to treat pulp dehydration, the particle size is too large, the particles are easy to precipitate, the particle size is too small, too much mud, then the water content of the filter cake will increase, and the life of the ceramic filter plate will be reduced.

Working principle, ultrasonic trouble and troubleshooting of ceramic filter

The shape and mechanism of the ceramic filter are similar to those of the disc vacuum filter, but the filter media are different. The filter medium of ceramic filter is the ceramic filter plate, it can produce the micro capillary effect and capillary force in micropores is higher than the general vacuum applied force, so that the pores keep full of liquid state, so no matter what the circumstances, the air does not pass through the ceramic filter plate, so that the ceramic filter solid-liquid separation of low energy consumption, and high vacuum.

Ceramic filter ceramic plate blockage, productivity reduction, how to clean, to achieve the best effect cleaning problems

Equipment comes with cleaning:Ceramic filter comes with a combined cleaning system, usually to ensure the normal backwash water pressure, combined cleaning (nitric acid + ultrasonic + backwash) time is sufficient, sufficient amount of nitric acid.

Ceramic filter in vacuum pressure enough, the ceramic plate does not suck pulp, what is the reason for analysis?

The incoming mud content, fine particle size, pulp itself is not suitable for the use of ceramic filter dehydration, if the use of ceramic filter dehydration in this case, will accelerate the blockage of ceramic filter plate, blocking the situation after the second reference description.

The vacuum of ceramic filter is not enough

Maybe the vacuum meter is broken. It doesn't show or show the data is different from the actual data.It could be the source of the vacuum, the vacuum pump failure.Pipeline leakage: vacuum system connecting pipes (metal pipes or rubber pipes) corrosion, aging and water leakage.Distributor head leakage: wear or poor sealing.Leakage of ceramic plate: rupture of ceramic plate.Other reasons.