2 Aluminum Plate

Hot Products

High Silica Cloth CMAX

Silicon Carbide Ceramic Foam Filters Precious Metals Casting

Ceramic Filter Plate 1

Silicon Carbide Ceramic Foam Filters Tailored Sizes As Customers Requirement

Ceramic Filter Plate 3

Casting Ceramic Foam Filter For Liquid Filter

Silicon Carbide Ceramic Foam Filter

Alumina Ceramic Foam Filter For Metal Foundry

Insulation Flexible Mica Paper Roll

Silicon Carbide Ceramic Foam Filters Ductile Iron Casting

FAQ

What are the causes of the powder moisture in the ceramic filter?

Generally, the ceramic filter is used to filter iron powder, and the water content of the filter cake is about 10%.

What are the functions of honeycomb ceramic filters?

At present, it is widely used in metallurgy, foundry industry, metal melt filtration, using mullite (cordierite) ceramic materials

Principle of chemical engineering drum vacuum filter, the faster the speed, the less the amount of filtrate obtained per turn, the more the amount of filtrate obtained per unit time?

The faster the speed is, the shorter the time required for each turn, i.e., the shorter the filtration time, the less the filtrate will be

The vacuum degree of the ceramic filter is normal and the cake water is large?

The vacuum degree of the ceramic filter is normal at about -0.08MPa. Under normal circumstances, the water content of the filter cake treated with a ceramic filter is about 10%, and the moisture content of the tail filter cake is about 15%. The water content of the filter cake increases with the increase of water content in the ceramic filter.

The use of water glass as beneficiation agent, copper concentrate in the ceramic filter can not filter, how to do?

As everyone knows, ceramic filter medium is a ceramic filter plate, microporous ceramic filter plate with a lot of distribution from the outside to the inside capillary effect, its mechanism is based on the capillary effect of microporous ceramic filter, filtration, the filtrate (generally refers to water) through these pores under the action of the vacuum suction pump, filter cake is trapped on the surface of the ceramic filter plate.

Influence factors of ceramic filter

(1) the particle size and the distribution of the material match the microporous of the ceramic filter plate. Although the ceramic filter plate aperture is bigger, easy to suck the pulp, but easy to cause the ceramic filter board to block up.(2) the ceramic filter plate with the same ceramic filter plate with high pore permeability and high water permeability is selected with high water permeability and good slurry absorption performance. The spindle speed is slow, the formation time of growth in the area of vacuum filter cake, production capacity increased gradually, but because the unit time of grout thickness and spindle speed slow is proportional to, so the ceramic filter capacity in a range of showing the highest.

Ceramic filter in vacuum pressure enough, the ceramic plate does not suck pulp, what is the reason for analysis?

The spindle speed is too fast.The speed is too high to absorb the filter cake.There are other possible reasons.

How should the static and dynamic sealing points of the ceramic filter be leaking?

The filtrate pump works to drain or recycle the water that has been pumped out. 6 、 cleaning system work, cleaning system includes backwashing (water pump pressure or height difference pressure), acid liquid (metering pump, automatic acid injection), ultrasonic (ultrasonic work), etc.. 7 、 control system and other electrical systems. In addition, the filter cake which is absorbed and dried on the ceramic filter plate is unloaded automatically by the scraper and then falls on the belt conveyor, and is conveyed to the concentrate storage yard by a belt conveyor.