1 2 Aluminum Plate

Hot Products

Ceramic Filter Plate 1

Silicon Carbide Ceramic Foam Filters Grey Iron Casting

High Silica Cloth CMAX

Ceramic Filter Plate 3

Ceramic Filter Plate 4

Silicon Carbide Ceramic Foam Filters Precious Metals Casting

Zirconia Foam Ceramic Foam Filter

Casting Ceramic Foam Filter For Liquid Filter

Cordierite Ceramic Plate For Sale

Casting Ceramic Foam Filter For Liquid Filter.

FAQ

Can the ceramic plate filter the hot air?

The cleaning of the ceramic filter is divided into two parts: reverse flushing (also useful gas) and combined cleaning. The purpose of cleaning is to discharge the particles from the hole to the ceramic filter board. Anti flushing and cleaning water filter after direct visual pressure can, generally between 0.08--0.12MPa, such as less than 0.05MPa, while the poor flushing effect without even washing effect, resulting in blocking accumulation eventually led to the ceramic filter plate hole plugging scrap. Replacing the filter element in time and ensuring the water pressure before filtration can provide stable backwashing water pressure. Combined cleaning by ultrasonic vibration, nitrate dissolution method for maximum remove blockage of backwash rushed out, the general ceramic filter every 8 hours of continuous work should stop cleaning 1 hours, such as the use of the old plate or the suction effect is poor, can strengthen cleaning (such as shorten the cleaning period, prolong the period of cleaning, increase the amount of nitric acid etc.). Other reasons such as 1,2,3 are normal, but can not be discharged from the spindle speed too fast, even the ceramic filter itself manufacturing defects, the user equipment modification and so on, are likely to lead to abnormal operation of equipment. We specialize in ceramic filter boards for many years and welcome exchanges.

The vacuum degree of the ceramic filter is normal and the cake water is large

There is a difference between the vacuum display and the actual vacuumThe main speed of the ceramic filter is too fastThe water content of the filter cake is gradually increased within 0~8 hours after the equipment has been continuously turned onThe ceramic filter plate does not meet the aperture range and the opening rate is lowThe ceramic filter plate has a near life and serious blockageCeramic filter cleaning standards (acid, ultrasonic, backwash water)The scraper can not be completely discharged, and the surface of the ceramic plate is coated with a thin filter cakeFailure to manufacture equipment or other causes of failure

What is the working pressure of the ceramic filter?

The backwash pressure is the size of the backwash of the ceramic filter during recoil stage, and the recoil pressure is generally less than 0.12MPa. The greater the pressure, the better the recoil effect, the better the service life and the suction effect of the ceramic filter plate, and the worse the service life and the suction effect of the ceramic filter board. The backwash pressure of the ceramic filter shall be no less than 0.07MPa.

The ceramic filter suddenly did not smoke, and later he was all right. What's the reason?

How old the general ceramic filter suction main reason mud cake thickness is not much of a ceramic filter plate is different, because the ceramic filter backwash water, vacuum suction and nitrate are through the distribution valve, are often the same boat". See your description, you do not know the 5 line is about "5 disc or sideways 5 rows of ceramic plates, that is completely not suction or suction effect is poor, I hope to help you:

Ceramic filter ceramic plate blockage, productivity reduction, how to clean, to achieve the best effect cleaning problems

Replace ceramic filter plate:Different users because of pulp particle size and different characteristics, the service life is long and short of ceramic filtering plate. For the use of a long time and after the method 1 and 2, the effect of slurry suction is still very poor, we should consider replacing the new ceramic filter board.

Does the ceramic factory use hydrochloric acid?

Ceramic filter comes with a combined cleaning system, usually to ensure backwashing normal, combined cleaning (nitric acid + ultrasonic + backwash) in place.

Beneficiation ceramic filter no problem, the technical parameters are normal, but filter out the concentrate water suddenly excessive, what is the reason?

Beneficiation of ceramic filter, the technical parameters are normal, but the water will fill in groove is what reason

What is the reason that ceramic filter does not absorb mineral powder?

One is leakage, two is no liquid output or output weakness, pressure is too low, cleaning effect is not good, the pressure is too large, will cause damage to the filter plate and reduce the slurry concentration. The recoil pressure is regulated by the pump loop valve and the pressure regulating valve.