Wood-like Board
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
decoration board/ceiling board/wall panel
PU Embossing Decoration Panel
In terms of material proportioning and technical output of RXHP pu product, six-component mixed pouring technology,allowing on-line automatic operation which is the most advanced in the globe is adopted to take the lead in achieving six-component continuous foaming in China and finish proportioning process on line at a time; On the other hand, the formula can be adjusted in accordance with the environmental change to match with air-entrapping mixing unit to bring more well-distributed materials and finer foams for the purpose of producing high-strength, energy-saving and environment-friendly building boards.
Thickness: | 16mm normal type |
Material of the panels | composed of colorful steel sheets and polyurethane |
Unit Weight of Core Material | 40kg/cbm |
Panels type | Wall panel decoration outside |
Surface, Texture and Appearance | Small wave, Flat, Embossment, Big rib |
Heat Insulating Material | Polyurethane |
Thickness of steel sheet | 0.4-0.8mm |
Color of the coating | various color and pattern |
Installation | Insert Method |
Type of sheet Coating | PVDF, HDP, SMP, PE |
Type of Base steel sheet | Hot-dip galvanized, Al-Zn coated |
Product Advantage
l Environment-friendly: It is a green building decoration material free of radioactivity, formaldehyde, heavy metals and other hazardous substances; in case of high temperature or open fire, no harmful gases and smoke are generated.
l Clean: It is an antistatic material which surface is dust-free.
l Moistureproof: It is not easily distortional and has stable wet strength, so it can be used in the humid environment.
l Heat-insulated: It is featured with remarkable heat insulation property, so it is the preferred heat-insulated and energy-saving material.
l Corrosion-resistant: Its surface may resist acid-base, so it has outstanding stain resistance.
l Colorful: Many color options are prepared for customers for elegant and mild decoration.
Application Scope
This product mainly provides villa, prefab house, holiday homes with complete heating insulation and anti-static clean system, including walls, suspended ceilings and anti-static workbenches, etc.
In full consideration of static prevention, cleanness, fire prevention and other professional demands, take beautiful appearance, moisture resistance, acoustic performance, durability and other physical and chemical properties into account for the purpose of providing perfect safety protection system.
- Q:Board grade divided into
- According to state regulations, the environmental protection level of wood is divided into three categories: E0, E1 and E2. Environmental protection level E0 level: E0 level is the current national standards and related to the detection of ecological sheet of the highest environmental standards. Because the 0.5mg / l formaldehyde content is already a very safe numerical standard. According to relevant information, the formaldehyde content of drinking water is 0.9mg / l, that is, E0 grade formaldehyde content is less than drinking water. Environmental level E1 level: in accordance with state regulations, the indoor plate environmental protection level must be achieved E1 level was considered standard, that is safe and environmentally friendly, the human body will not cause harm. In recognition of the quality of the plate at the same time, the most concerned about the furniture used by the formaldehyde emission of sheet metal. E1-level environmental standards are mandatory national health standards, is mandatory "safety standard line." E1 <= 1.5mg / l, that is, 1.5mg / l formaldehyde content is in line with national standards, is environmentally friendly, harmless to the human body. Environmental level E2: E2 <= 5mg / l, E2 level of formaldehyde content has exceeded the national standard, the current production industry in the plate industry is very few E2 grade, E2 grade products must be treated after finishing to be used Interior decoration.
- Q:Many types of flooring, which OKorder is suitable for several floor plate?
- Heart material brown to reddish brown, texture staggered, usually with deep and white stripes; wood with luster; no special smell; thick but uniform wood, with yellow minerals; heavy hard, material stability, beautiful pattern, heart material pressure. can resist termite harm. High strength wood, wear, smooth after the plane, easy to paint, dry and good stability. the price is moderate; in the solid wood floor in the relatively high cost, the world generally like to use high-quality furniture, flooring, window decoration, frame and doors, boats and bridges.
- Q:Do you know the top of the wardrobe?
- The top solid wardrobe is made of high quality plate, special process, moisture resistance, formaldehyde emission meet the E1, E0 environmental standards, with anti-deformation, anti-mildew pest control, anti-acid, anti-scratch, recyclable The use of double-track single pull pulley, the last round of the United States DuPont pu materials, the next round of modified pps material, with wear-resistant, muffler, bearing the strong and so on. With the top of a special top and bottom seal, completely put an end to dust. The top of the wardrobe pulley is the international top of the sliding system, tight seal.
- Q:Always said that the plate is very complex, think about learning a little professional knowledge
- Can be distinguished by the following steps and methods: First is "see", but also to see the focus. Good plate surface smooth and smooth, the edge of the board is very clear. As well as the packaging on the plate is clear, the above name, address, grade, specifications and other information are complete, not clear, incomplete information or more attention to the plate, and may be added to the color of the plate. Two smell, because the legendary formaldehyde is released from the plate, will directly affect people's health. Good plate not only good choice of materials, but also for the adhesive glue is environmentally friendly, even if the number of more stacked together, it will not emit a very pungent taste. If the choice of a plate placed in the home there is a very obvious pungent chemical smell, it should be noted. ?Three saws, before the purchase can be a small sample to the business, and then cut it to see its inner core, a good plate section level is very clear, because it is a layer of paste a very tight, very good convergence, and those miscellaneous Wood stitching the poor quality of the plate core is not dense, must not buy. Four test, through the relevant identification agencies, with professional tools and related technical means to identify the plate to determine the quality of good or bad, this method is more professional and accurate. Plate material is also an important factor is the moisture content, the general moisture content of the plate should be less than 16%, if too high that is not good, may be a while will be mildew or deformation.
- Q:These three brands, I would like to know what is the most commonly used models, to prevent follow-up suppliers supply difficulties, so to know the three brands used in the most specific models is what? (Such as Kingboard and the international market, said the material A, in the end what model, not a few people can say clear
- A material is FR-4 plate in the building materials and international materials, the two kinds of materials, high durability, high temperature, toughness than other sheet metal.
- Q:What is the PS board? What is his performance? What is his relevant national standard or industry standard?
- Polystyrene (PS) extruded sheet Features and uses: The product is polystyrene as the main raw material, made by extrusion, free coloring, odorless and tasteless non-toxic, not to bacteria growth, with rigidity, insulation, good printing, etc., mainly for packaging, container equipment, Daily decoration, general electrical and construction and other industries. PS polystyrene decorative board is polystyrene particle molding compound in the extrusion plate on the extrusion molding of organic polymer sheet. Features: PS polystyrene decorative board is a thermoplastic. The specific gravity of 1.05, the melting temperature of 150-180 ℃, the absorption rate is low, light transmission rate of up to 88-92%. Ability to organic acid, alkali, salt and lower alcohols, but also soluble in esters and ketones.
- Q:What kind of plate is the decoration with the density board?
- In daily life, people commonly referred to as the MDF, but also can be called fiber board, it is made of wood fiber, or other plant fiber as raw materials, plus urea-formaldehyde resin, or other appropriate adhesive made of man-made sheet. Since it is called MDF, then it must have a certain density. Therefore, according to their density, we can divide the MDF into three categories: low density board, medium density board and high density board. In view of the MDF texture is soft, and the impact resistance is relatively strong, but also relatively easy to re-processing, so abroad, MDF is a very good material making furniture. However, because the domestic demand for high-density board is much lower than the international standard, therefore, the quality of China's MDF should also be further improved.
- Q:Blockboard specifications Why is 2.44 * 1.22M, is the system board specifications on the board so much, or decoration industry in the size of the use of more convenient and so on? I want accurate information. Thank you
- This size is 8 feet * 4 feet, blockboard, fibreboard, plywood, etc. are the most commonly used in this specification. There are also 6 feet * 3 feet but are not commonly used.
- Q:Bathroom and kitchen ceiling selection of what kind of plate is better?
- The effect of using a light blue ribbon pattern will be better.
- Q:The difference between plate and wire
- The difference between the plate and the wire is the difference between the size of the material and the difference between the use: Wire is a diameter of 5-22mm hot rolled round steel or equivalent of this section of shaped steel. Due to wire rod in the form of delivery, it is also known as the wire rod. Wire section circumference is very small, the common product specifications diameter of 5-13mm. According to the different rolling mill can be divided into high-speed wire (high line) and ordinary wire (ordinary line) two. Wire is generally made of ordinary carbon steel and high quality carbon steel. In accordance with the distribution of different types of steel and use, wire, including ordinary low-carbon steel hot-rolled disc, high-quality carbon steel wire rod, carbon wire rod, quenched and tempered wire rod, wire rope with wire rod, As well as stainless steel wire rods and so on. The plates are usually made of standard-sized flat rectangular building material panels for wall, ceiling or floor components. Also refers to the forging, rolling or casting made of metal plate. Divided into thin plate, medium plate, thick plate, special thick plate, usually made of standard size flat rectangular building material board. Plate product shape flat, thick and thick ratio, the unit volume of the surface area is also great This shape features to bring its use on the characteristics: (1) large surface area, so inclusive capacity, in the chemical industry, containers, construction, metal products, metal structures, etc. have been widely used; (2) can be arbitrarily tailored, bending, stamping, welding, made of various product components, the use of flexible and convenient, in the automotive, aviation, shipbuilding and tractor manufacturing and other departments occupy an extremely important position; (3) can be bent, welded into various types of complex sections of steel, steel, large I-beam, channel and other structural parts, it is called "universal steel."
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Wood-like Board
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
