Aerial work platform--DAWP16SA
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Four-wheel drive provides srperior performance and maneuverability
ABS control box and panel are firmer,lighter and water-proof.
Clear and visual operating label makes operator easy to control and avoids wrong operations.
Cable protection package, to prevent accident reduce replacing cost
Rough terrain capabilities with 40% gradebility
Best horizontal extended distance is 7.77M.
Min turning radius, flexible
360° platform non-continuous swing
180°table swivel angle
140°(+76°/-64°) small arm luffing angle
Ground control system
On-Board diagnostics help operators troubleshoot on the fly and make adjustment in the field to maximize uptime
Characteristics | Model | unit | DAWP16SA |
Safe working load | kg | 230 | |
Maximum working height | m | 16 | |
Maximum platform height | m | 14 | |
Maximum horizontal extended distance | m | 7.77 | |
Platform height | m | 7.71 | |
Platform swing angle | 360° Non-Continuous | ||
Table swivel angle | ° | 180° | |
Small Arm luffing angle | ° | 140°(+76°/-64°) | |
Dimensions | Size of working platform A×B | m | 1.83×0.76 |
Complete platform length C | m | 6.88 | |
Complete platform width D | m | 2.15 | |
Complete platform height E | m | 2.27 | |
Wheelbase F | m | 2.05 | |
Lowest ground clearance G | m | 0.34 | |
Tyre(solid tyre) | 33×12-20 | ||
Performance | Tailswing | 0 | |
Minimum turning radius(inner wheel) | m | 2.15 | |
Minimum turning radius(external wheel) | m | 4.83 | |
Driving speed unextended status | km/h | 6 | |
Driving speed under lifting and extending status | km/h | 1.1 | |
Maximum grade ability(4×4) | % | 40% | |
Maximum allowed angle | ° | 5° | |
Motor | Motor | kW /rpm | Perkins 404D-22: 35.7kW /2600rpm |
Hydraulic oil tank | L | 119 | |
Diesel oil tank | L | 76 | |
Weight | Complete platform weight | kg | 7900 |
Standard equipment
● Can Bus Technology
● Proportional controls
● Safety electric pump
● Horn
● Hour meter
● Tilt protection
● Tilt alarm
● 360°non-continuous turntable rotation
● Self-leveling platform
● Fault indication on platform
● Hydraulic platform rotation
● Anti-restart engine protection
● Enging heater plug warm up device
● 4WD
● European III emission engine
● Foot pedal
● Overload limits
● Solid tyres 33×12-20
- Q:Introduction of vertical elevator milling machine
- Vertical knee-type milling machine is a general-purpose milling machine. Vertical milling machine by end milling cutter, end mill, cylindrical milling cutter, saw blade milling cutter, wafer cutter, end milling cutter, and various forming milling cutter for machining various parts.
- Q:What should the chain's main elevator be aware of when installing the chain
- Oil cylinders and power unit system problems. Too much power or too little can cause all kinds of problems in the elevator, so choose the right power unit.
- Q:Does the shear fork lift stand belong to special equipment?
- It belongs to special equipment, the manufacturer must have special equipment production qualification "special equipment manufacturing license" to be able to produce the sale shear fork lift machine. The products of the manufacturer without relevant documents are not eligible.
- Q:How to maintain the platform?
- The platform comes in many forms: a, hydraulic. B, mechanical, etc. Hydraulic platform maintenance essentials: 1, to minimize the use of the rustbelt for safety and safety. 2, the joints should be lubricated regularly and lubricate. Regularly check for corrosion or damage to the top of the high pressure tubing and tubing. 4, the limit switch is maintained in good condition, not water or moisture. Always check the oil pump pressure and the oil gauge line. 6, check regularly for oil spills. 7, daily clean maintenance work.
- Q:The purpose of the rail elevator
- Guide lifter is a kind of hydraulic elevating shear machinery and equipment. Used for secondary and tertiary industrial workshop, restaurant, wine shop floor between the transport of goods. The minimum height from 150-150 mm, optimal it is suitable for the workplace can't excavation pit. And do not need the upper lifting point, in the form of diversification (single column and double column, the four pillars). Equipment running smoothly, guide of elevator guide rail is commonly channel steel, H steel, square tube welding, operation is simple, reliable and convenient transport of goods economy.
- Q:To make a four trapezoid screw lifting up seven tons of lifting platform should be matched with the straight screw and motor
- Can be judged according to the accuracy requirement of lead screw grinding or rolling, depending on the load and its acceleration can choose servo power right away and screw the maximum load capacity (do longer engineers can intuitive judgment the diameter of the screw and large), so that you can around the power of the servo motor of the different speed and different lead screw to match, so there will be several different schemes: high speed servo motor with small lead screw (sometimes deceleration machine), big inertia servo with lead screw. Under the condition of the machine cost to determine, from two to three scheme choice, choice of method is to choose low cost, with high stability, cost effectiveness and cost are the same common and suppliers have a spot. If the single from choose the ways of the servo and screw usually have an intuition, like 3000 revolutions of servo goods on the market the most sufficient, screw is according to the supplier's inventory.
- Q:Does the fixed hydraulic platform need to submit to the specification requirement
- And then apply for the installation, the installation is done please them again to acceptance inspection, need to producers of products production license, installation and maintenance license, product certification, product warranty card, inspection work more troublesome, need to manufacturers and use of business cooperation. There will be a fee, in some places only provide qualification, ran a few trips, more in some places to spend a lot of it, and later to check every year.
- Q:Description of fixed hydraulic elevator
- Fixed hydraulic elevator products can be divided into cut and fork, double shear, guide rail, cylinder type and wall hanging type etc. Design is novel, dual ladder anti-rotating structure, double speed drop system, the largest rise in 35 meters, stable and reliable, beautiful, simple operation is the biggest characteristic of fixed hydraulic lift cylinder type. Double ladder anti-revolution structure ensures the safety and stability of the work. Also, considering the actual environment of the scene, the oil cylinder can be dumped and handled to ensure the maximum scope of the machine operation.
- Q:How to choose the platform and how to use the method
- The purchasing and lifting machinery should not be bought blindly, should be fully market research, and field inspection, determine the size of the company and its credibility. This is one of the first is also a must, many small businesses in order to seek the market now violence and cut corners, so that the lifting platform quality is greatly reduced, although they will sell very cheap, but this kind of machine is not a long time, and the risk is big. As a result, it is a pity that the buyer should not be greedy for a small price.
- Q:What is the hydraulic platform driven
- The engine or motor drive oil pump can also be used manually.I hope my answer will help you.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Aerial work platform--DAWP16SA
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords