2013 New 0.5W MidPower 80Ra Samsung 5630 SMD LED
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 2500 Pcs bag
- Supply Capability:
- 100000 Pcs Per Month bag/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
2014 New 0.5W Mid-Power 80Ra 5630 SMD LED
Features
1. View Angle: 120°c
2. Precondition : JEDEC Level 2a
3. Dimension : 5.6 x 3.0 x 0.8 mm
4. ESD withstand Voltage : up to ± 5KV [HBM]
5. Highest efficacy mid-power LED (160lm/W)
6. Great for use in premium bulbs, ambient lighting, and LED tubes
7. Variety of CIE bin support options - full bin, quarter bin, and kitting bin (for warm white)
Specification
Absolute Maximum Rating
Item | Symbol | Rating | Condition |
Operating temperature range | Top | -40 °c ~ +85 °c | - |
Storage temperature range | Tstg | - 40 °c ~ +120 °c | - |
LED junction temperature | TJ | 110 | - |
Forward Current | IF | 150 mA | - |
Peak Pulsed Forward Current | IFP | 300 mA | Duty 1/10 pulse width 10ms |
Thermal resistance | Rth, j-s | 16C/W | Junction to solder point |
Assembly Process Temperature | - | 260 °c, < 10sec | - |
ESD | - | 5kV | HBM |
Specification
Attribute | Short Value | ||
Light Technical Data | Color | White | |
CRI | Min. | 80 | |
CCT | 2700-6500K | ||
Luminous Flux | Min. | 24.5lm | |
Max. | 30.5lm | ||
Beam Angle | 120 ° | ||
Electrical Data | Foward Voltage | Typ. | 2.91V |
Max. | 3.3V | ||
IF | 65mA |
Part Number | CRI | CCT | Luminous Flux | Beam Angle | Foward Voltage | IF | ||
Min. | Min. | Max. | Typ. | Max. | ||||
SPMWHT541MD5WAP0S0 | 80 | 6500K | 26.0lm | 32.0lm | 120 | 2.9V | 3.2V | 65mA |
SPMWHT541MD5WAQ0S0 | 80 | 5700K | 26.5lm | 32.5lm | 120 | 2.9V | 3.2V | 65mA |
SPMWHT541MD5WAR0S0 | 80 | 5000K | 27.0lm | 33.0lm | 120 | 2.9V | 3.2V | 65mA |
SPMWHT541MD5WAT0S0 | 80 | 4000K | 26.0lm | 32.0lm | 120 | 2.9V | 3.2V | 65mA |
SPMWHT541MD5WAU0S0 | 80 | 3500K | 25.0lm | 31.0lm | 120 | 2.9V | 3.2V | 65mA |
SPMWHT541MD5WAV0S0 | 80 | 3000K | 24.5lm | 30.5lm | 120 | 2.9V | 3.2V | 65mA |
SPMWHT541MD5WAW0S0 | 80 | 2700K | 24.0lm | 30.0lm | 120 | 2.9V | 3.2V | 65mA |
Applications
Indoor Lighting: Ambient Light, LED tube, Down light, LED bulbs and Ceiling Light
Trade Terms
1.Payment: T/T in advance
2.Production lead time: 10-25 days
3.Sample can be delivered in 5-7 days
4.Shipping freight are quoted under your requests
5.Shipped:DHL, Fedex, UPS, TNT
6.Discounts are offered based on order quantities
Our service
1.Your inquiry related to our products or prices will be replied in 24hrs.
2.Well-trained and experienced staffs to answer all your enquires in fluent English
3.OEM&ODM, any your customized lightings we can help you to design and put into product.
4.Distributorship are offered for your unique design and some our current models
5.Protection of your sales area, ideas of design and all your private information
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:Patch LED light does not flash, why?
- Are you saying that lamp is flashing? You can check the power output, according to your standard parameters and SMD beads, lamp panel series parallel mode, calculate the power output to output power of the test, you may be wrong, power, overload, but also the effective part of you may be the circuit for power transmission is not stable or low
- Q:The quality of the LED patch module
- Quality of circuit board. In the same quality of LED, the quality of PCB will have an important impact on the life of LED. The circuit board is divided into aluminum plate, glass fiber board, semi glass fiber board and paperboard. The quality of aluminum is the best, the best cooling effect, but the cost is too high, the domestic manufacturers generally only in high-power LED products use, LED module manufacturers generally use cardboard, semi glass fiber and glass fiber board. Module, piranha, straw hat module monochrome is generally used in cardboard or semi glass, commonly used glass fiber or semi SMD glass fiber board. Colorful and full color module series generally at least half of glass fiber, so as to match.
- Q:What determines the brightness of the patch LED?
- The brightness is consistent over a short period of time, that is, only by considering current and voltage consistency.Long term brightness is consistent with the consideration of the spacing and heat dissipation of different circuits. Uneven heat can also affect brightness.
- Q:How does the LED placement lamp distinguish the positive and negative poles? There is no sign on the light. Thank you
- The light emitting diode is fixed regardless of color. The light emitting diode 1, line: foot length is positive, the negative is short. The electrodes inside the tube can also be carefully observed, while the smaller ones are positive and the large ones, similar to the bowl, are negative. 2, SMD: overlooking the side with the color line is negative, the other side is positive.
- Q:What are the storage requirements of SMT patch LED (LED)?
- Clean? use no designated chemical liquids to clean SMD LED. These chemicals may damage SMD LED.. When necessary, wipe LED at room temperature with alcohol and dry at room temperature for 15 minutes before use? the effect of ultrasonic cleaning on SMD LED is related to the ultrasonic power and the SMD LED assembly method, and shall be checked in advance to ensure that the ultrasonic cleaning process does not impair the SMD LED
- Q:Patch LED light broken one, short circuit can use it?
- Only when a constant current source is used, the LED in series can be shorted. For the shunt power supply shunt LED, the open circuit LED can be disabled without having to manage it. The short circuit must be removed
- Q:What is the difference in performance between the LED plug-in and the LED patch?
- The cooling of the plug-in is not good, because the plug-in's lamp foot, in order to save costs, generally use iron plus coating, heat conduction is not very good.The strength of aluminium alloy is not enough, it is easy to break, and copper is expensive.Relatively speaking, the patch is good, because the heat is welded on the PCB, copper or direct aluminum substrate cooling, patches near.Otherwise, why do high-power patch it?!SMT direct placement machine, a high degree of automation, low rate of bad.
- Q:Does anyone know what the current rating of a white high brightness LED patch is? Where can I find out?
- The high power 1W is 350MA, and 3W is 700MA. They are all fixed and can be found everywhere.
- Q:What, in what way do I shunt the LED?
- In series, the voltage is 20 times the rated voltage, in parallel, the voltage is rated voltage, but in tandem, a LED is broken, it is not bright, so it is recommended not to use it.
- Q:Led lamp and Led patch two what is the difference between ah, the feeling is a patch of long service life, whether or not? 5-10 meters pan area lighting lamp selection Everbright shaped or patch shape?
- Patches do some high-end things, large luminous area, from afar to see more clearly, 5-10 meters with patches better!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
2013 New 0.5W MidPower 80Ra Samsung 5630 SMD LED
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 2500 Pcs bag
- Supply Capability:
- 100000 Pcs Per Month bag/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords