Vegetated Geogrid

Hot Products

FAQ

Where the geogrid is the cheapest! Plastic fiber polyester fiberglass geogrid there?
The geogrid grille is made of polypropylene, PVC polymer and thermoplastic or molded by two-dimensional grid or a certain height of the three-dimensional mesh screen, when used as a civil engineering, called geogrid.
Geogrids improve the performance of mechanically stabilized walls by providing reinforcement and enhancing the stability of the structure. They distribute the tensile forces across a wider area, reducing the potential for wall failure. Additionally, geogrids increase the overall strength of the wall, allowing it to withstand greater loads and pressures.
Is it the same thing as two way tgsg30-30 geogrid and two - way plastic geogrid
"Bidirectional geogrid tgsg30-30" is a specification for biaxially oriented plastic geogrid in; "30-30" means: per meter of longitudinal and transverse tensile force is greater than the degree of 30KN/m.
Yes, geogrids can be used in the reinforcement of embankments over soft soils. Geogrids are commonly used in civil engineering to provide stability and strength to soil structures, including embankments. By distributing the load and reducing lateral movement, geogrids can effectively reinforce embankments over soft soils, preventing slope failure and improving overall stability.
Geogrids improve the performance of asphalt pavements by providing reinforcement and stability. They effectively distribute the load across the pavement structure, reducing cracking and rutting. Additionally, geogrids enhance the overall strength and durability of the pavement, thus extending its lifespan and reducing maintenance costs.
What is the significance of each index
The slope on shop, should maintain a certain degree of tightness.Two)Geosynthetics shall be placed on each side of the embankment for a certain length, and shall be folded and wrapped in compacted fillOn the plane, the exposed part of the earth is covered by the soil.Three)When the joint of geosynthetics is used, the lap length should beThree hundred
Construction method of glass fiber grid
2, road surface conditionPavement must be clean, clean, dry, temperature at 5 degrees Celsius -60 degrees celsius.3, product preparationSelf adhesive fiberglass geogrid shall not be stored in a dry environment on the site to keep the viscosity.4, matters needing attention(1) workers must wear gloves when contacting self adhesive fiberglass grille.(2) when the self adhesive glass fiber grating is used for passing through obstacles, it is necessary to use a knife to cut off the geogrid.(3) it is not allowed to fold when laying self adhesive fiberglass grille, so there must be enough tension in the course of laying.(4) the overlap of the end part is 75-150 mm, which ensures that the overlap is along the laying direction.(5) overlapping parts on both sides of 25-50 mm.(6) only the construction vehicle or the emergency vehicle shall be allowed to walk on the ground after being laid and rolled down, but it shall be ensured that the damage of the geogrid shall not be caused by the turning or braking of the vehicle.
How much is a square meter
4, geogrid reinforced airport foundation can greatly improve the bearing capacity of the runway, to ensure the safety of aircraft landing5, geogrid can be used for garbage disposal, power plants, ash dam project, coal mine, metallurgy, green, enclosure and other fields6, the construction of soft foundation reinforcement, improve the overall bearing capacity of the foundation