Rpe Geomembrane

Hot Products

FAQ

Yes, geomembranes can be used in rainwater harvesting systems. Geomembranes are impermeable barriers that can be installed to line and protect the rainwater storage tanks or ponds, preventing any leakage or contamination of the collected rainwater. They are commonly used to enhance the efficiency and sustainability of rainwater harvesting systems.
nan
PE is polyethylene, HDPE is high density polyethylene
Yes, geomembranes can be used in groundwater extraction wells. They are commonly used as liners in these wells to prevent contamination of the extracted groundwater and to protect the surrounding environment.
nan
Increases the friction coefficient of contact surface. not only increases the tensile strength and puncture resistance of plastic film. Salt erosion. The main mechanism is to cut off earth leakage passage by using imperviousness of plastic film. used in the dark conditions:. // g, bearing hydraulic?pressure and adapting to dam deformation with its great tensile strength and elongation, not afraid of acid. baidu; and non-woven cloth is also a kind of high-molecule short fiber chemical material. At the same time, has long service life, through needle punching or hot sticking forming, in favor of the stability of composite geomembrane and protective layer, after being combined with plastic film, and because of rough surface non-woven fabric.baidu, alkali, they have good corrosion resistance to bacteria and chemical reaction, has high strength of extension and extensibility.
nan
Does not meet the SBS construction conditions SBS can not conduct construction on the waste plant, because the base under the waste plant is soil layer; flat
Yes, geomembranes are suitable for use in geothermal energy projects. Geomembranes are flexible and durable materials that can effectively contain and control fluids, making them ideal for lining geothermal well pads and reservoirs. They provide a barrier against fluid leakage, prevent soil contamination, and help maintain the integrity of the geothermal system. Additionally, geomembranes have excellent thermal properties, which can contribute to the overall efficiency and performance of geothermal energy projects.
nan
Principle of diaphragm valve: Diaphragm valve is a special form of block valve, appearing in the 1920s. Its opening and closing member is a separator made of a soft material, to seperate inner cavity of valve body and inner cavity of bonnet, so it is called as diaphragm valve. Features of diaphragm valve: The most prominent feature is to seperate inner cavity of lower valve body and inner cavity of upper bonnet so as to protect valve rod, valve clack and other parts above diaphragm from etching by medium. It save filler sealing structure, and medium will not leak. diaphragm made of rubber, plastic membrane and other soft sealing material has good sealing property. Because diaphragm is a wearing part, it should be replaced at regular intervals depending on the medium characteristics. Due to limitation of diaphragm material, diaphragm valve is suitable for low pressure and medium temperature. Diaphragm, according to structure, can be divided into: house, straight-flow, cut-off, straight-through, flashboard and right angle types. The connection form is usually flanged joint. According to drive mode, it can be divided into manual, electric and pneumatic types, among which pneumatic drive is divided into normally open , normally closed and reciprocating types.
nan
at present, HDPE membrane is used to make closure material. HDPE film is anti piercing and anti aging. It is protective for it is of high density. the disadvantage is higher cost, easy aging in when exposed to sunlight, so it need covering by soil or geotextile.