Lithium Ion Battery 24 Volt

Hot Products

Home Storage All in one Battery with IP65 VPP and IOT JX Good Quanlity

Stocked In Africa Wall Mounted 51.2v 100ah Lifepo4 Battery Powerwall

51.2V 100ah 5kwh panama warehouse wall mounted lihtium battery for solar system

Motive power battery 6V 200Ah AGM Deep Cycle Battery

Panama warehouse spot inventory 10kwh household lithium batteries for solar system

Higher weight power density and high IP65 all in one battery with VPP and IOT(JX)

Factory price stacked energy storage lithium ion battery 48v 100ah 5kwh 10kwh 20kwh

BMS built-in long life lifepo4 12v 100ah 150ah 200ah deep cycle lithium-ion battery

6000 Cycle 5kwh 48V 100AH Rack Mounted Lithium ion Battery for Solar System 10 years warranty

Factory price 5kw inverter and 10kwh lithium-ion battery all in one storage energy system

FAQ

What are the technical parameters of the battery?

Usually the capacity of the power supply is expressed by kV · A or kW. However, as a power supply VRLA battery, the use of security (A · h) that its capacity is more accurate.

The role of the battery?

Battery is widely used, can be used for ups, electric cars, scooters, cars, wind energy solar systems, security, and so on.

What is the meaning of the battery above 12v65Ah?

12V represents the rated voltage. 65Ah indicates that the battery capacity (ie 1 ampere current can be used for 65 hours).

What battery does the van use?

The most obvious feature of lead-acid batteries is the top of the plastic cover can be unscrewed, there are ventilation holes above. These fillers are used to fill pure water, check the electrolyte and the use of exhaust gas. In theory, lead-acid batteries need to check the density of each electrolyte and the level of liquid, if there is a need to add distilled water. But with the upgrading of battery manufacturing technology, lead-acid battery development for the lead-acid maintenance-free batteries and colloidal maintenance-free batteries, lead-acid batteries do not need to add electrolyte or distilled water. Mainly the use of positive electrode to produce oxygen can be absorbed in the negative oxygen cycle, to prevent water reduction. Lead-acid water batteries are mostly used in tractors, tricycles, car start, etc., and maintenance-free lead-acid battery wider range of applications, including uninterruptible power supply, electric vehicle power, electric bicycle batteries. Lead-acid batteries according to the application needs to be divided into constant current discharge (such as uninterruptible power supply) and instantaneous discharge (such as car to start the battery).

How does battery activation work?

Always keep the battery surface clean. Found that the surface of dust and acid, it should be timely wipe, wipe can be wiped with soda water wipes wipe again, after rinse with water.

How to repair the battery?

To the battery in accordance with the 0.1C current discharge, record the discharge time. Its discharge current multiplied by the number of hours of time, is the battery repair capacity. If the Chongqing battery capacity to reach the nominal capacity of more than 70%, the end of the repair.

How should the battery be well maintained?

Voltage check the state of the battery standard voltage should be maintained between 12.2 ~ 12.7V. If the voltage is too low should be charged, the charge should be kept small charge for a long time. Battery charging need to use a professional charger, the owner will not try to charge their own, the owner can only keep the engine running on the battery can be charged. If the battery aging should be replaced.

What are the advantages of maintenance-free batteries?

Maintenance-free battery using lead-calcium alloy grille, the amount of water generated when charging less water evaporation is low, with the shell with a sealed structure, the release of sulfuric acid gas is also very little, so with the above advantages.