Galvanized Steel Tubs

Hot Products

Factory Supply Light Steel Keel T-Bars Galvanized Ceiling T Grid Good Quality Galvanized

Cold Rolled Steel Galvanized Profiles Drywall C Channel steel sizes

Drywall Profile-Track for Partition System

Cold formed Profile Steel Drywall for ceiling structure

Steel frames profiles for plasterboard Partition

Omega Furring Channel Stud Track C Gypsum Light Steel Channel Metal Stud and Track Price38121.0mm

Dry Profile-for Partition System in Decoration

Steel Profile-Drywall Grid System for Partition

Galvanized Light Steel Keel Main Channel Drywall Partition Light Steel Keel

Galvanized steel profiles U/C channel for drywall

FAQ

Light steel keel wall to remove the price

General demolition is to ask the workers, the price of workers depends on the local price, should be the price of each place are different, hope to have a role in you.

Light steel keel gypsum board partition should pay attention to what quality problems

For the wall (or the top wall of the building), the distance between the vertical keel shall not be greater than 400mm, the distance between the transverse keel shall not be more than 600mm, and the fire gypsum board shall be used. Fixed, the upper edge of the gypsum board fixed on the top with the keel, the board from the floor should be greater than 20mm, and fire sealant with solid.

The designer said the solid wood flooring keel hit the prefabricated board after the lack of effort in the future may not be strong?

1: you have the conditions or bricklayers, practice: build the wall of the place, you can add a reverse beam (plus a beam on the floor) and then wall, reinforced concrete beam; another direct to do the word steel or channel to do Beam, pay attention to the two heads to be on the point of support. Build the wall again. ? 2: do light steel keel gypsum board wall accidentally wear a hole. Is a short time to be. Not moisture, is easy. 3: the floor can be made of wood, the material with a little bigger. Encrypt a little bit. The problem is not big, other solid floor to do on the ground fixed point has changed the day.

Shanghai light steel keel ceiling wall how much labor costs?

Do not know how much of your area may be a little expensive point of the ceiling 10 yuan / square wall 80 / side less expensive to the point is not the same everywhere, roughly in the 20 to 25 or so labor price.

Light steel keel + gypsum board wall and other wall joints how to strengthen?

Distance can be used with nail gun, more than 10cm above hanging with a large crane

Will the light steel keel, brick block, light partition wall do inside the wall what are the advantages. Including the price, as much as possible, thank you!

Light steel keel light steel keel easy to install, suitable for office, plant and so on.

The walls are light steel keel gypsum board partition, the property requirements can not move, but I would like to do a word on the wall shelf, how construction?

You know how to do it If you want to do their own, you need to find the location of the wall light steel keel, and then a layer of woodworking board fixed to the light steel keel, and then do the partition in the woodworking board. Very simple, you may be confused

Use light steel keel to do the shelf, install the glass partition wall, this process is feasible? How about construction?

It is quite possible that this practice is very common. In the office building decoration, it will often use this method to do with the installation of glass. Just, light steel keel need to use gypsum board to do the surface closed, and with latex paint in the final decoration.