Galvanized Steel Dock Posts

Hot Products

Drywall Profile-Stud for Partition System

Galvanized Profiles for Dry Wall Galvanized Profiles

Drywal steel profile/Good construction material

Galvanized Light Steel Keel Main Channel Drywall Partition Light Steel Keel

Dry Profile-for Partition System in Decoration

Galvanized stud for gypsum drywall metal stud and track

Steel frames profiles for plasterboard Partition

Factory Supply Light Steel Keel T-Bars Galvanized Ceiling T Grid Good Quality Galvanized

Cold Rolled Steel Galvanized Profiles Drywall C Channel steel sizes

Omega Furring Channel Stud Track C Gypsum Light Steel Channel Metal Stud and Track Price38121.0mm

FAQ

Shanghai Light Steel keel ceiling Shanghai plant decoration office building decoration light steel keel ceiling wall

Effective space division The internal space of the plant is mainly divided by the operator according to their actual use requirements to make reasonable use of space, if the plant has a large number of equipment, it is not appropriate to set too much partition and partition, as far as possible to the ground color or with some Color identification to the division of the region, with the identification of the area to avoid too much color, so not only the regional division is not obvious also feel dizzy, and some plants can be clearly divided into the equipment area and office area, such a plan It is now more common because it is easy to manage. Then in the design of such a plant must master the data and the close combination of space, but also take into account the equipment area and the working area of the work area is smooth and dust, noise interference.

Do light steel keel gypsum board partition to pay attention to what matters?

1, the main structure is completed, before the ceiling, the first wall construction. 2, light steel keel installation is completed, should be based on the construction acceptance of the keel for acceptance, such as skeleton does not meet the requirements, should be promptly adjusted. 3, the installation of gypsum board must be stress-free installation, first with self-tapping nail fixed gypsum board center parts, and then fixed the edge, so that the gypsum board after installation without any stress.

Light steel keel partition wall fire retardant coating shabu several surface

Brush when, in accordance with the requirements, at least need to brush twice. Although the Tai Po people in practice only brush it again, but suggest that you still brush twice for safety.

Will the light steel keel, brick block, light partition wall do inside the wall what are the advantages. Including the price, as much as possible, thank you!

The Brick block from the weight of large, said to do on the floor will increase the load on the building, upstairs is not convenient. Light wall panels are similar to light steel keel partitions. Is the price or light steel keel cheap. I do light steel keel project, and now plant, office buildings are using this.

What is the decoration of the wall? Lightweight bricks Or light steel keel frame?

The effect is certainly not the same or the cement mortar is really some wall after the installation of the socket is not vague. The

How to install light steel keel gypsum board wall

Light steel keel gypsum board installation should generally be through the following steps: wall line → wall construction → installation along the ground, along the top keel → installation of vertical keel → fixed door and window makeup → installation of the wall side of the gypsum board → install another side of the plaster price → seam processing → wall decoration. 1. Wall line According to the design of the wall, in the ground to release the wall bit line, and the line leads to the ceiling and side walls. 2. Wall construction First on the wall and floor, ground contact parts for cleaning, coated with interface treatment agent together, then pouring C20 concrete wall, the wall surface should be smooth, both sides should be vertical. 3. Install the edge along the top keel Along the ground, along the top keel in place, with the nail fixed, shot nail from the 900mm, the location of the nail should avoid the laying of the tube area. 4. Install the vertical keel According to the determined vertical keel spacing, along the ground, along the top keel on the line drawing line. The vertical keel is arranged by the end of the wall. When the doors and windows are provided with windows and doors, they should be arranged from one side or both sides of the door window. When the last keel from the wall of the size is greater than the provisions of the keel spacing, you must add a keel. The upper and lower ends of the keel should be fixed along with the top, along the keel with rivets or tapping screws.

Light steel keel wall can be installed sliding door

How can not press ah. It is estimated that you are afraid of wood that you fooled you And your door is too big to shrink it. The normal door is 800. Get so much useless. Now the light steel keel wall is too much. How can we press the door.

Light steel keel wall how to install glass door

The same installation, but in the door frame position can not use the light steel dragon skeleton, and would have to use the big core plate frame to do the door frame, and the width of at least 15 cm above the job, otherwise it will be deformed. The weight is quite large .. is the installation of ordinary doors, are used Daxin board frame. Width of 10 cm or more ... If you stay in the door position is a direct light steel dragon skeleton, this is not safe, can not be fixed