Container Plywood

Hot Products

FAQ

A brief introduction to plywood
Commonly used plywood type plywood, penta and so on. Plywood can improve timber utilization and is a major way to save wood.
Wood board, plywood, MDF What is the difference
Can be single-sided sanding, double-sided sanding or both sides are not sanding.
nan
Edge defects at the edges of the panel due to sanding, sawing or collision caused by the corner defects.
The difference between the multilayer board and the plywood is as follows
The number of layers is generally odd, and few are even. Vertical and horizontal direction of the physical and mechanical properties of small differences
What types of plywood can be divided into?
and soft wood decoration Plywood (used for construction, furniture, vehicles, ships and other high-level decorative materials), plywood type according to the bonding strength is divided into
The basic principle of plywood
are symmetrical. In the same plywood, you can use a single tree and veneer thickness, you can also use different tree species and thickness of the veneer
What are the defects of the plywood?
dead dead knots formed by the dead branches of trees, knots surrounded by the surrounding wood together, or even only part of the length of its cross-section of the length of about 1/4 or less than 1/4 , Texture hard or soft, and sometimes fall off the formation of empty.
What is the use of plywood for construction?
Plywood is the direction of the logs along the ring to cut into large sheets of single board, after drying, after coating by the adjacent veneer layer grain direction perpendicular to the principle of the billet, glued from the plate.