Amiantit Grp Pipes

Hot Products

FAQ

What are the standards for FRP pipes?
The pressure test pump passes directly through the test hole on the top of the pipe. The water pressure of the pipeline working pressure of 1.5 times after the pump stops (during the operation to open the drain valve exhaust), observation of 2min, the pressure drop value does not exceed the test pressure and the nozzle 5%, no leakage, nozzle pressure test is qualified. If the pressure drop is relatively fast, it shows the sealing effect is not good, to re install, to ensure that the FRP pipe pressure test system overall success.
FRP acceptance standard
As the glass pipe between the use of socket type, double "O" type sealing ring connection, so each installation of a pipe, it is necessary to bear in the socket to suppress, in order to detect double "O" type sealing ring sealing effect. The pressure test pump passes directly through the test hole on the top of the pipe. The water pressure of the pipeline working pressure of 1.5 times after the pump stops (during the operation to open the drain valve exhaust), observation of 2min, the pressure drop value does not exceed the test pressure and the nozzle 5%, no leakage, nozzle pressure test is qualified. If the pressure drop is faster, the sealing effect is poor and needs to be reinstalled to ensure the overall pressure test of the FRP piping system is successful.
Why FRP pipe corrosion?
If it is ordinary water, generally does not count corrosion, there will be no obvious corrosion, long time began to soak rotten.
What are the materials used in smoke exhaust pipes?
In the production of the coal mine exhaust pipe is indispensable, in underground work, because from the ground, the air is not easy to reach, easy to accumulate large amounts of methane gas, these gases will need ventilation pipe timely transferred to the ground to prevent the explosion in the coal mine ventilation pipe, the material is generally iron and plastic.
Glass fiber reinforced plastic GRE pipe broken hole how to repair and repair?
Don't let the powder go. It is autumn, the temperature is low, so to put more than summer curing agent, as to the exact proportion, I just guess should be: curing agent, accelerator, resin; 1:1.5:8 with glass fiber wrapped around the pipe, coated on the glass fiber cloth to make glass steel with good quickly, let the glass steel the glass fiber cloth fully soaked, waiting for the full glass steel after curing, and then repeated several layers. It will be strong.
The outer thermal protection layer of the pipeline is made of GFRP. Which guy knows the construction method?
One is to finish insulation wrap (Qin material cloth) and then wrapped a layer of glass paper....... The other is a glass lined steel pipe outside the pipe and then foamed and insulated inside
What kind of project needs fiberglass pipe?
Glass fiber reinforced plastic material has the advantages of corrosion resistance, high strength, low weight, and other materials can not be compared, the use of a wide range of purposes, such as water supply, chemical raw materials, hot and hot water transportation, ventilation and so on
How to prevent the glass fiber reinforced plastic pipe from being damaged by aging or over pressure, causing the liquid to splash and hurt people
If you are afraid of the glass tube will be such a question, the weak links or parts of the local reinforcement, the conditions can, can re pipe liner, to compression, anti ageing effect