24 Volt Lithium Ion Battery

Hot Products

CECOX 4000W All in one Battery with long life LFP Cell and IP65 grade

10kwh wall mounted lithium battery Panama warehouse household lithium battery for solar system

Higher weight power density and high IP65 all in one battery with VPP and IOT(JX)

Panama warehouse spot inventory 10kwh household lithium batteries for solar system

Best Price High Voltage 192v 380v 10kw 15kw 20kw Lithium ion Battery For Solar Energy Storage System

Factory price 5kw inverter and 10kwh lithium-ion battery all in one storage energy system

Stocked In Africa Wall Mounted 51.2v 100ah Lifepo4 Battery Powerwall

Powerone good quality all in one battery with IP65 and APP(JX)

Factory price stacked energy storage lithium ion battery 48v 100ah 5kwh 10kwh 20kwh

BMS built-in long life lifepo4 12v 100ah 150ah 200ah deep cycle lithium-ion battery

FAQ

What are the technical parameters of the battery?

The main performance parameters of the battery are the following: model; voltage; battery capacity; battery type, such as lead-acid batteries, alkaline batteries, lithium batteries, solar cells, fuel cells.

The role of the battery?

Battery is widely used, can be used for ups, electric cars, scooters, cars, wind energy solar systems, security, and so on.

Maintenance-free battery how to detect it?

Check the height of the electrolyte at least once a month. There is no mark line of the battery, the electrolyte added to the plate 10-15mm can be higher; there are two red line of the battery, the electrolyte can not exceed the red line above.

What is the meaning of the battery above 12v65Ah?

12V is said to be the voltage, 65Ah is the current. (A is the unit of current. H is the time unit .1 hours.)

What battery does the van use?

The most obvious feature of lead-acid batteries is the top of the plastic cover can be unscrewed, there are ventilation holes above. These fillers are used to fill pure water, check the electrolyte and the use of exhaust gas. In theory, lead-acid batteries need to check the density of each electrolyte and the level of liquid, if there is a need to add distilled water. But with the upgrading of battery manufacturing technology, lead-acid battery development for the lead-acid maintenance-free batteries and colloidal maintenance-free batteries, lead-acid batteries do not need to add electrolyte or distilled water. Mainly the use of positive electrode to produce oxygen can be absorbed in the negative oxygen cycle, to prevent water reduction. Lead-acid water batteries are mostly used in tractors, tricycles, car start, etc., and maintenance-free lead-acid battery wider range of applications, including uninterruptible power supply, electric vehicle power, electric bicycle batteries. Lead-acid batteries according to the application needs to be divided into constant current discharge (such as uninterruptible power supply) and instantaneous discharge (such as car to start the battery).

How does the battery increase the voltage?

The so-called battery is the storage of chemical energy, if necessary, the release of electrical energy of an electrical chemical equipment.

How to repair the battery?

To the battery in accordance with the 0.1C current discharge, record the discharge time. Its discharge current multiplied by the number of hours of time, is the battery repair capacity. If the Chongqing battery capacity to reach the nominal capacity of more than 70%, the end of the repair.

How should the battery be well maintained?

Electrolyte density This is to evaluate whether the battery charge is normal, whether the aging of the important parameters, the use of density meter or electrolyte density tester can be measured. If the electrolyte density is too small, you need to charge. And the electrolyte concentration is too thick or too thin to a certain extent, it means that such as the occurrence of plate vulcanization, short circuit or overcharge phenomenon, this time on the need for maintenance.