WK-4D hydraulic Excavator for mining on sale
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 3 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
We manufacture four types of 4m³ excavators, including WK-4A, WK-4B, WK-4C and WK-4D excavators. Our WK-4C excavators are the most advanced, and will gradually replace the WK-4A model. They are widely used in metallurgy and coal in middle and small opencast mines for excavating and stripping works, as well as in petroleum, chemical, hydropower, construction, and earth/stone work engineering.
Technical Spec. of WK-4D | |||
Nominal bucket volume | 5m³ | Main motor | 200kW |
Lifting speed | 0.885m/s | Max. Excavating radius | 14.3m |
Pushing speed | 0.53m/s | Max. Excavating height | 10.1m |
Traveling speed | 0.43km/h | Max. Dumping radius | 12.65m |
Max. Lifting force | 450kN | Max. Dumping height | 6.3m |
Max. Pushing force | 225kN | Excavating depth | 1.75m |
Max. Crawling angle | 13° | Working weight | 200t |
Average bearing pressure | 226kPa | Theoretical productivity | 572m³/h |
We have established a new production base in the Binhai New Area of Tianjin to facilitate the transportation and export of large-sized equipment. Our second wheel production line is currently under construction. We have also established production lines for wheels, axles and wheel sets for use at speeds above 200 km/h.
We are now turning our focus to international markets which we are certain can benefit from our high quality products and service. As we are constantly innovating and improving, we have no doubt that we will meet and even exceed our customers’ expectations.
We are the largest manufacturer of excavators in China. Since 1961, we have developed the first 4 m³ electric rope shovel with a standard dipper capacity of 4 m³ to 75 m³. We produce WK-4C, WK-8, WK-10B, WK-12, WK-20, WK-27, WK-35, WK-55 and WK-75 excavators, which utilize gear-rack crowding and AC VVVF technology. The world’s first and largest WK-75 mining excavator is now in operation in Xilin Haote, in Datang. Up to now, we have supplied more than 1300 excavators in China to gain more than 95% of market share in China. Our excavators are widely used in coal mines, metallurgical mines and ferro-metal mines. More than 27 of our excavators have been exported abroad, to locations such as India, Pakistan, Myanmar, Peru, Russia, Kazakhstan, Chile and South Africa.
- Q:It's been a long time since i seen this movie so my description is most likely inaccurate but I'll try my best.i believe this is the beginning, you see them excavating some spot n they call the person or one of the excavators recognize some remains then a flashback of the past. And uuhhh... that's all i can remember.:Phopefully my description is good enough but i highly doubt it.
- Sounds like Godzilla. :)
- Q:I would like to operate heavy equipment such as a dozer, crane, excavator, etc. All the jobs I have seen require experience, how do I lean to do this if everyone wants you to know how already? I have seen schools that you can go to but they charge $10,000 for a 9 week class, I cannot afford this and prob wouldnt pay that if I could afford it. Any help would be greatly appreciated, thank you.
- IF you do not want to attend a certified school, (and I don't blame you) then your best option is to apply to the companies that do the type of work, get a spot as a laborer, and while you are in your interview, clarify what you want to do. (for yourself and for the company) Start out on the bottom, and find a mentor that will be willing to teach you, or get the company to send you to school. It is a great field to be in, so don't give up.
- Q:I'm looking for the used excavators and mini excavators information. Where can I get?
- Adding okorder as well
- Q:Proper operation of excavator excavation
- 2, noteworthy operationsThe hydraulic cylinder is arranged inside the buffer device, can gradually release pressure near the end of stroke; if subjected to impact loading at the end of stroke, the piston will directly touch the cylinder head or cylinder bottom, easy to cause the accident, so to the end of travel should as far as possibleRemaining space. Of bulldozer operation will cause the bucket and the work device is not a normal stress caused by rotary motion, distortion or even pin weld cracking, broken, should try to avoid such operations. Digging with the weight of the body will cause the abnormal state of the slewing bearing, and will produce strong vibration and impact on the chassis. Therefore, the hydraulic cylinder or hydraulic line will be damaged greatly. When loading heavy materials such as rocks, they should be unloaded near the bottom of the truck, or first loaded with earth, and then loaded with rock, so as not to unload at higher levels to reduce impact damage to the truck. When the caterpillar gets stuck deeper in the mud, a board is placed under the bucket, and the crawler is supported at the bottom of the bucket. Then the board is lowered under the caterpillar track and the machine is driven out.
- Q:I need to change some undercarriage for my Komatsu excavator,but i do not how to confirm its quality.
- YOu need to change some undercarriage? Usually You just rebuild it. With new parts of coarse. used parts on heavy equipment usually don't work out well.
- Q:looking for the switch to change from cat controls to john deere controls on a cat 315 excavator
- cat dealer suppose to have diagram to switch hoses?!
- Q:What's the name of the lock door?
- Are you talking about a lock with two hooks that can adjust the length?. That's the lock on the steering wheel of the car!
- Q:Excavator construction price
- Price is not the same, time to time general price, 400 yuan per hour or so, the long-term operations by the day ", but also by the total amount of work, etc.
- Q:i have one male about three inches long and two femals two inches long (head to tail)
- That is hard indeed. i had a pair for 2 years and they never ever mated. Substrate: Try to use the excavator burrowing clay. This is fairly easy to keep clean and if given proper care you should only need to clean it every 6 months. Another on is reptibark or a mixture of dirt and sand 4:1 (without fertlizer). Lighting: You should use a 5.0 UVB light. Like Repti-Sun 5.0. Try to keep the theme rainforest-ish. Don't use heat rocks because it will burn their stomachs. If using a ten gallon cage I recommend using a 25 watt spotlight as it is very weak and won't burn your lizards while still giving them the heat they need. Branches and hides can be placed in the tank. They will climb branches and these are good for basking. They will need the basking side to be of about 90 degrees and a cool side of 75-80 degrees. Other: Misting the cage once a day will keep them at a good humidity. Also give them a water dish that is deep enough for them to soak in. For feeding you can offer them mealworms, crickets, roaches, waxworms. They do not eat any vegetable matter. Clean the cage every 2 weeks.
- Q:I'm going to Australia (NSW) in a couple of months on a working holiday visa and need to know exactly what i need before getting a job on a site as a excavator driver i.e cards tickets ect. This is my job here so I have experience
- By and large you won't get a job as an excavator driver whilst on a working holiday visa. These visa's are designed for young people to visit our country and finance themselves whilst here by lightweight temporary employment. It is not a career move. Employers recognise this fact and are not, entirely realistically, interested in employing WHV people in employment such as this - particularly in today's economic climate. Re-evaluate your motives for coming here on a WHV before continuing.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
WK-4D hydraulic Excavator for mining on sale
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 3 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords