Wire Harness Tape ZUB-150
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- USD3000 roll
- Supply Capability:
- 30 Days For 1x20' FCL roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
|
- Q:What is a composite PE tape?
- Main technical specifications of adhesive tape1. Tensile strength >20MPa; patch >15MPa2, elongation at break is >200%, >300%3, peel strength >20N/cm; to coating primer steel plate >5~10N/cm; to back material >5~10N/cm4. Electrical strength >3MV/m5, water absorption rate <0. 03%Main technical specifications of primer1, table dry time 1~5min2, viscosity 10~15s
- Q:PVC insulation tape can withstand high temperature for a long time without aging failure
- PVC tape at temperatures below 70 degrees can not aging, where you are used, and if the environment requires high temperatures, you can use high temperature insulation tape
- Q:What's the name of the tape?
- Third, the raw rubber tape is mainly used for the interface connection of the hot and cold water pipes. It is to enhance the tightness of the pipe connection, so as to prevent the water leakage at the interface, so as to increase the leakproof effect of the pipeline interface. In the current HVAC and water supply and drainage equipment will use sanitary tape.
- Q:What are the differences between electrical tape and electrical tape? Which ones are used in those industries?
- Electrical insulating tape, with soft polyvinyl chloride (PVC) film substrate, manufacture coated rubber pressure sensitive adhesive, with insulation, fire resistance, voltage resistance good, cold resistance, suitable for automotive wiring, wire winding, insulation protection etc..
- Q:Reasons for tape degumming
- Use glue improperly. PVC as the surface material, you can not use hot melt adhesive, the most coating glue
- Q:PVC pipe and duct tape tape what is the difference
- First,PVC pipe adhesive tape:PVC pipeline adhesive tape is the base material, PVC material, trade name: anticorrosion tape, pipeline anticorrosion tape
- Q:What's the quota for PE membrane isolation layer?
- Specification for polyethylene tape: its thickness * width * length, in fact, determines what thickness of adhesive tape to use. For example: in order to strengthen the level level of corrosion, corrosion thickness of 1.0mm; corrosion level reinforced, corrosion thickness of 1.4mm; according to the lapping mode with internal and external anticorrosive adhesive tape, tape thickness determination. According to the construction mode of adhesive tape winding, determine the width of anticorrosive adhesive tape. Don't use the manual winding tape is too wide, the construction workers when the efforts are not easy to control, it is best not to exceed 150mm wide; manual mechanical winding (with some simple mechanical and visual), but the maximum width is 230mm; the mechanical winding tape width appropriate to relax, but preferably not more than 300mm.
- Q:What are the polyethylene film sleeves?
- Specification for polyethylene tape: its thickness * width * length, in fact, determines what thickness of adhesive tape to use.For example: in order to strengthen the level level of corrosion, corrosion thickness of 1.0mm; corrosion level reinforced, corrosion thickness of 1.4mm;According to the lapping mode with internal and external anticorrosive adhesive tape, tape thickness determination.
- Q:PVC pipe and duct tape tape what is the difference??
- PVC pipe adhesive tape:PVC pipeline adhesive tape is the base material, PVC material, trade name: anticorrosion tape, pipeline anticorrosion tape. It has a strong bonding force and is very solid,
- Q:What raw material is the electrical tape made of?
- Electrical tape:Electrical tape is called polyvinyl chloride electrical insulation adhesive tape, and some people call it electrical insulation tape or insulating tape.Polyvinyl chloride film for electrical adhesive tape is made of base material and coated with rubber pressure-sensitive adhesive.The electrician tape used to use electrical specifically to prevent leakage, insulation tape. The utility model has the advantages of good insulation, pressure resistance, flame retardance, weather resistance, etc. the utility model is suitable for the connection of wires, the protection of electrical insulation, etc..
1. Manufacturer Overview |
|
---|---|
Location | Beijing, China |
Year Established | 2007 |
Annual Output Value | Above US$10 Million |
Main Markets | Southeast Asia; South America; Eastern Europe; North America; Northern Europe; South Asia; Western Europe; Africa; Mid East |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Tianjin |
Export Percentage | 10%-20% |
No.of Employees in Trade Department | 51-100 People |
Language Spoken: | English; Chinese |
b)Factory Information | |
Factory Size: | Above 3000 square meters |
No. of Production Lines | Above 10 |
Contract Manufacturing | produce single sided tapes,double sided tapes, masking tape, Opp tape |
Product Price Range | High; Average |
Send your message to us
Wire Harness Tape ZUB-150
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- USD3000 roll
- Supply Capability:
- 30 Days For 1x20' FCL roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords