Suspension Ceiling T Bar Galvanized /T Grid Groove System
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 8000 pc
- Supply Capability:
- 700000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Main Characteristic
1. High grade galvanized steel as main material, non-deforming, fadeless,moisture proof and
anti-corrosive.
2. Strong close fitting, high symmetry
3. High load capacity
4. Easy and fast installation, save installing time and labor cost
5.Large production line and strict product inspection, larger quantity and better quality
are available
Size:
Name | Picture | Height(mm) | Width(mm) | Length(mm) | Package |
Main tee |
| 32/38 | 24 | 3600/3660 | 30pcs/ctn |
Cross tee | 26 | 24 | 1200/1220 | 60pcs/ctn | |
Small cross tee | 26 | 24 | 600/610 | 75pcs/ctn | |
Wall angle | 22/24 | 22/24 | 3000/3050 | 50pcs/ctn | |
Thickness : 0.3mm,0.35,0.4mm |
Inspection item | Unit | National Standard | Test Result |
Appearance | —— | no damage | no |
Hole Distance Difference | mm | ±0.3 | ±0.1 |
Difference of baking paint thickness | µm | ≥20 | 24 |
Width Difference | mm | ±0.5 | 0.1-0.3 |
Length Difference | mm | ±1.0 | 0.3-0.6 |
Underside straight Limitation | mm/1000mm | ≤1.3 | 0.6 |
Galvanized thickness | µm | ≥14 | 17 |
Load bending Limitation | mm | ≤2.8 | 2.1 |
Installation:
Ceiling T Grid Proportion | |
Mineral Fiber Ceiling/PVC Gypsum Ceiling | 1 m2 |
Main Tee | 0.225 pcs |
Cross Tee | 1.35 pcs |
Small Cross Tee | 1.35 pcs |
Wall Angle |
Description:
1.Superposition joint part between main carrier and vice carrier or vice carrier and carrier is called point lap.
2.It uses lap structure to assembly, connection between joints dovetail very well. The joint face unknits and have a nice appearance.
3.There is a barb at the vice carrier joint, it can avoid loosing and falling from the infection of outside force.
4.Soleplate of main and vice carrier is zincification armor plate, which meets the national GB standard demand. We use baked paint zincifcation armor plate as baked paint panel,whoes capacity of zincification is high. It meet the national GB standard demand.
5. Raw Meterial is galvanized steel with 80-100g/sqm
FAQ
1.Sample: small sample can be offered by free
2.OEM: OEM is accepted
3.MOQ: small order is ok
4.Test: any third party is accepted to test
5.Factory: Can visit factory any time
6.Delivery Time: small order is within 7days or according to your order
- Q:Light steel keel ceiling ordinary material how much money a square
- Hanging gypsum board? Count down may be 11,12 dollars look like an ordinary gypsum board 17 a 3.6 square
- Q:Can the interior walls be made of light steel keel partitions? Bathroom wall and interior wall with light steel keel wall is good or brick wall good?
- The interior walls can be made of light steel keel partitions, but the bathroom walls should be made of brick walls.
- Q:What is the light steel keel double gypsum board partition wall
- Refers to the internal framework of light steel composition, Two pairs of laying gypsum board, and then in the gypsum board and then putty putty, brush paint. This composition of the partition is the so-called double gypsum board partition.
- Q:T-type light steel keel tb24 * 38 what does it mean
- T-type is not on the person, the width of 24mm, height 38mm is the T-type main keel
- Q:Light steel keel hanging flat how to calculate the material?
- Per square meter double plane ceiling material dosage. (10m * 10m size for the measurement unit, the main keel spacing 900mm, cover keel spacing 600mm, consider the 5% loss, the actual site ceiling size, spacing differences, the following table data will be corresponding changes.
- Q:How hard is it to remove a hung ceiling?
- It wasn't that hard. We removed the tiles, which were attached, not the drop in tile type, then we had to remove the grid, however we didn't have to be as careful as you may have to be, we suspected we'd have to gut the ceiling anyway. But PEB is right, you may not like what's underneath. We had the drop ceiling attached to an old plaster and lath ceiling, which we removed and down came a ton of grimey blown in insulation. But we like our 9 foot ceilings, now done in sheetrock, so much better. Good Luck!
- Q:Im looking to put one up in an area that is 20x22.... does any one know a round about price?
- The grid work will run about $.90 per square foot and the tile from $.60 to $1.60 or more.Good Luck
- Q:Why home decoration ceiling with wooden keel and tooling ceiling with light steel keel
- Because the home decoration ceiling are generally close to the top, the space is smaller, with wooden keel is more appropriate, and tooling ceiling with light steel keel is to better resistance and tensile, generally above the larger space, easy maintenance Piping and lines.
- Q:Looking at putting in a drop ceiling...someone said they saw one at Menards that is supposed to fit tight to the rafters...has anyone seen this or used it?? Likes/dislikes??
- I haven't used it, but it does look interesting. I have a basement finishing coming up in the next year or so and this will definitely be on the list of things to check out.
- Q:For one of my classes I have to do a floor plan with furnishings and electrical and then I also have to do a reflected ceiling plan of the same floor that includes lighting, HVAC, and finished materials. I was just wondering what the difference is?
- Reflected Floor Plan
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Suspension Ceiling T Bar Galvanized /T Grid Groove System
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 8000 pc
- Supply Capability:
- 700000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords