Solar Monocrystalline (175W-195W)
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT
- Min Order Qty:
- 1 pcs pc
- Supply Capability:
- 100000/month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Solar Monocrystalline (185W-195W)
Introduction of Solar Monocrystalline (185W-195W)
A solar panel is a set of solar photovoltaic modules electrically connected and mounted on a supporting structure. A photovoltaic module is a packaged, connected assembly of solar cells. The solar module can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications.
CNBM Solar photovoltaic (PV) Panel is designed for large electrical power requirements. It is the optimal choice for both on-grid and off-grid power systems. CNBM Solar panel offers high performance of power per square foot of solar array. Monocrystalline silicon(c-Si): often made using the Czochralski process. Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon. Hence most c-Si panels have uncovered gaps at the four corners of the cells.
Characteristics of Solar Monocrystalline (185W-195W)
I. Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.
II. Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.
III. EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.
IV. AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.
V. Junction box: Multi function junction box with water proof.
VI. Long lifetime: ≥25 years; Less power decrease.
VII. Good performance of preventing from atrocious weather such as wind and hails.
VIII. Resisting moisture and etching effectively, not effected by geology.
IX. The certificate issued by international authority: UL, TUV, IEC, VDE, CE.
Standard Test Conditions of Solar Monocrystalline (185W-195W)
The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.
Advantages of Monocrystalline Silicon Solar Panel
• CNBM Solar performance guarantees for 25 years
• 12 years guarantee for workmanship
• Timeliness of delivery
• Quality Products certified (TÜV, UL, CE, VDE, ISO)
CNBM International Corporation's products including Monocrystalline Solar Panel, Polycrystalline Solar Panel have received and enjoyed famous reputation in many countries and regions in the world .As a solar panel manufacturer in China, we strive to provide our customers with excellent service, superior products and unmatched value.
Technical Data
Characteristics of Solar Monocrystalline (185W-195W)
Max Power Voltage Vmp (V) | 36.27V | 36.5V | 36.75V |
Max Power Current Imp (A) | 5.1A | 5.2A | 5.31A |
Open Circuit Voltage Voc (V) | 45V | 45.2V | 45.4V |
Short Circuit Current Isc (A) | 5.5A | 5.6A | 5.7A |
Max Power Pm (W) | 185W | 190W | 195W |
Temperature Coefficient of Cells
NOCT | 47℃±2℃ |
Temperature Coefficients of Isc (%/℃) | 0.0981 |
Temperature Coefficients of Voc (%/℃) | -0.5186 |
Temperature Coefficients of Pmp (%/℃) | -0.4601 |
Mechanical Data of Solar Monocrystalline (185W-195W)
Dimension | 1580×808×40mm |
Weight | 15.5kg |
Tolerance | 0~+5W |
The dimension of the modules can be changed according to the demand of clients
Limits of Solar Monocrystalline (185W-195W)
Operating Temperature | –40 °C to +85°C |
Storage Temperature | –40 °C to +85°C |
Max System Voltage | 1000VDC(IEC)/600VDC(UL) |
Guarantee of Solar Monocrystalline (185W-195W)
Products Guarantee | 12 yrs free from defects in materials and workmanship |
Performance Guarantee | No less than 90% within 10yrs and no less than 80% within 20yrs |
Certificates | IEC, ISO, TUV, CE |
The Pakage of Solar Monocrystalline (185W-195W)
The Production Line of Solar Monocrystalline (185W-195W)
- Q:HIToday i was using my BB gun and shot my dads solar panel. I want to fix it for him because he spent a lot of time trying to get the solar panels. All i broke was the glass on the front, what is the glass and where can i buy new glass for it?
- Even if you can buy solar glass, you CAN'T properly repair the panel for the cost of having a professional do the work.
- Q:Can solar panels be installed on a car or electric vehicle?
- Yes, solar panels can be installed on a car or electric vehicle. These panels can generate electricity by harnessing sunlight and can be used to power certain components of the vehicle, such as the battery or air conditioning, reducing reliance on the main power source. However, due to limited surface area on cars, the amount of power generated may be relatively small compared to the vehicle's overall energy needs.
- Q:Can solar panels be installed on parking lots?
- Yes, solar panels can be installed on parking lots. In fact, many parking lots around the world are being equipped with solar panels to generate clean and renewable energy. These solar panels are typically installed on canopies or carports above the parking spaces, providing shade for vehicles while harnessing sunlight to produce electricity. This innovative solution helps to reduce carbon emissions and provides a dual benefit of generating power while maximizing the use of available space.
- Q:Can solar panels be used for powering remote monitoring systems?
- Yes, solar panels can be used to power remote monitoring systems. Solar panels capture sunlight and convert it into electricity, which can then be used to power various devices and systems, including remote monitoring systems. This makes solar panels an environmentally friendly and cost-effective solution for powering such systems in remote locations where access to the electrical grid may be limited or non-existent.
- Q:There are places in the US where it is sunny almost all the time, like the southwest. But if we covered an area of the Sahara with solar panels, the sun exposure with the area would generate enough energy for the whole US at least. Plus, I would imagine it would be a great source of income for those countries.Why isn't this a topic under discussion or even mentioned between countries' governments/in Congress/in politicians' viewpoints?
- It's expensive - solar power isn't competitive with power from the grid in most countries and it's a very expensive in terms of capital - you have to put most of the money up front. Meanwhile fossil fuel plants are cheaper to build and from then on you only spend money on fuel when you're selling power (and of course you don't have to pay for the damage you cause society with air pollution and greenhouse gases).
- Q:Can solar panels be installed on a library or educational institution?
- Yes, solar panels can be installed on a library or educational institution. In fact, many libraries and educational institutions have already embraced solar energy and installed solar panels on their rooftops or surrounding areas. This helps them reduce their carbon footprint, save on electricity bills, and serve as a sustainable example for the community.
- Q:I hooked up a 2V solar panel to a small relay. The relay switches at 9V. When I have light shining on the panel it puts out aorund 3-4V, but when I hook it up directly to the relay it drops to V and doesn't switch the relay. Why? and How do I fix it?-2V Mono-Crystalline Solar Panel -JWD 7 4 reed relay
- I suspect the voltage is OK but the amount of current the solar cell is capable of delivering is less than the relay coil needs to operate. The current the relay tries to draw overloads the PV. You need to add additional PVs in parallel to operated the relay coil. An alternative is to use a low current draw relay coil or use a transistor switch. Hope this helps, NewtonLaw
- Q:How are solar panels made?
- Solar panels are made using a complex manufacturing process that involves several key steps. First, high-quality silicon ingots are sliced into ultra-thin wafers. These wafers are then treated with various chemicals to enhance their electrical properties. Next, metal contacts are added to the front and back of the wafers, allowing for the flow of electricity. The wafers are then assembled into a module, encapsulated in a protective layer, and sealed with a glass cover. Finally, the completed solar panels undergo rigorous testing to ensure their efficiency and durability before being ready for installation.
- Q:Can solar panels be installed on a commercial building?
- Yes, solar panels can be installed on a commercial building. In fact, many businesses are opting for solar panel installations as a way to reduce energy costs, promote sustainability, and take advantage of government incentives. Commercial buildings provide ample space for solar panels to be installed on rooftops or as ground-mounted systems, allowing businesses to generate clean energy and contribute to a greener future.
- Q:Can solar panels be installed on churches or religious buildings?
- Yes, solar panels can be installed on churches or religious buildings. In fact, many religious institutions have embraced solar energy as a sustainable and cost-effective solution to reduce their carbon footprint and lower energy bills. Installing solar panels on churches not only aligns with their commitment to environmental stewardship but also allows them to set an example for their community by promoting clean energy and sustainability.
1. Manufacturer Overview |
|
|---|---|
| Location | Jiangsu, China |
| Year Established | 2004 |
| Annual Output Value | Below US$1 Million |
| Main Markets | Australia；Asia；South East Asia; South America；North America； Europe；Africa |
| Company Certifications | ISO 9001:2008; CE; TUV; UL |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Shanghai |
| Export Percentage | 1% - 10% |
| No.of Employees in Trade Department | 200-300 People |
| Language Spoken: | English；Chinese |
| b)Factory Information | |
| Factory Size: | Above 8,000 Square meter |
| No. of Production Lines | 6 |
| Contract Manufacturing | OEM Service Offered；Design Service Offered |
| Product Price Range | Average |
Send your message to us
Solar Monocrystalline (175W-195W)
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT
- Min Order Qty:
- 1 pcs pc
- Supply Capability:
- 100000/month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
