SAE 100 R12 High Pressure Rubber Hose
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000M m
- Supply Capability:
- 80000 Meter Per Month m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details of SAE 100 R12 High Pressure Rubber Hose
Material: | NBR | Cover compound: | CR |
Temperature range: | -40 to 120°C | Hose ID: | 1/2-2" |
Specifications of SAE 100 R12 High Pressure Rubber Hose
Cover: oil, abrasion and weather resistant synthetic rubber
Working temperature: -40°C~+100°C
Applications: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, fuels, lubrication, emulsion and hydrocarbons etc. It is used for low-medium pressure hydraulic systems in industry and agriculture
The Technical Parameters of SAE 100 R12 High Pressure Rubber Hose
SAE 100R12 | |||||||||
Inside Diameter | Reinforcement Diameter | Outside Diameter | Working Pressure | Proof Pressure | Burst Pressure | Min. Bend Radius | Weight | ||
inch | mm | mm | mm | psi | bar | bar | bar | mm | kg/m |
1/2 | 12.3-13.5 | 20.8-21.4 | 23.4-24.2 | 4060 | 280 | 560 | 1120 | 180 | 0.84 |
5/8 | 15.5-16.7 | 24.5-25.1 | 27.1-27.9 | 4060 | 280 | 560 | 1120 | 200 | 1.1 |
3/4 | 18.6-19.8 | 27.8-28.4 | 30.4-31.2 | 4060 | 280 | 560 | 1120 | 240 | 1.33 |
1 | 25.0-26.4 | 35.1-35.7 | 38.3-39.1 | 4060 | 280 | 560 | 1120 | 300 | 1.85 |
1-1/4 | 31.4-33.0 | 44.1-44.7 | 47.3-48.1 | 3045 | 210 | 420 | 840 | 420 | 2.65 |
1-1/2 | 37.7-39.3 | 50.1-50.7 | 53.5-54.3 | 2540 | 175 | 350 | 700 | 500 | 3.2 |
2 | 50.4-52.0 | 62.7-63.3 | 66.9-67.7 | 2540 | 175 | 350 | 700 | 630 | 4.5 |
Packaging & Delivery
Packaging Detail: | By woven bag, 50m/roll or 100m/roll. We can package as your request Shipping by a 20'container. Based on your quantity. |
Delivery Detail: | In 15~30days after receiving the 30% deposit |
- Q:Plastic coated metal hose flexible conduit joint what treatment
- You see what the other end is connected to the main, if the connecting hose can be used self fixed joints, if no thread connection pipe, to set joint by three column card, if the connection device or threaded pipe, external thread joint, and some fittings, Glenn joint
- Q:Do you need a hose connection to connect the ventilation pipe to the exhaust fan? Under what circumstances? Under what circumstances?
- Must be added, never heard without the place, the wind turbine operation produces vibration, and galvanized sheet steel pipe is fixed at a certain place, if not, fan vibration, wind pipe vibration, the wind tube life are not long.
- Q:What should I pay attention to when rubber tube is in storage?
- The phenomenon of natural vulcanization caused by long-term exposure to corrosive gas or prolonged exposure to sunlight is called aging of rubber. The main phenomena are increasing of self weight, volume expansion and strength reduction.
- Q:What is the function between the rubber pipe joint and the installing pipe?
- The inner seamless seamless rubber joint prevents the corrosive medium from eroding the inner wall of the rubber joint and improves the service life in the high temperature resistant, acid resistant and oil resistant pipes.
- Q:The rubber is sheathed on a metal cylinder. How should they be connected?
- With the combination of metal rubber is coated with adhesive before production and rubber vulcanization shaping, you can use this temporary experiment 502 geliahao for glue or adhesive, but the disadvantages of this thing with winter is not strong, the metal surface must be clean
- Q:Access toilet water inlet hose joints, how to repair water?
- However, be careful not to hold back too much to prevent the toilet from being cracked. Because before if overwind, or rust, is not open, can only remove the drainage valve inside with a pipe wrench stuck open.
- Q:Do I need a shim for the flat metal hose joint?
- If one of the two interconnected joints is one of those with a groove and a O ring, it would be better to put the O ring in it and seal it better.
- Q:The pipe of the gas water heater is buried in the wall. It is made of nylon tube and rubber tube. Is it possible to use rubber tube?
- With respect to the through wall gas safety management regulations, it is clear that hoses can not be used through walls.
- Q:Do the rubber joint and Y filter need flange connection?
- To look at the general caliber, less than DN50 also has threaded connection type (i.e., thread), but flange type is more reliable.
- Q:The basic buret is a rubber tube is inlaid with a glass bead to replace glass piston. Why this burets cannot be used to install Potassium Permanganate solution?
- Are made of glass, acid burette glass piston burette, no piston, just at the tip of a rubber tube, rubber tube with glass beads, glass or the lower beak. Why not the same because of acid burette, glass and alkali reaction, generate silicate, sticky, if it is very easy to use acid burette, the hole is blocked, damaged burets.
1. Manufacturer Overview |
|
---|---|
Location | Tianjin, China |
Year Established | 1998 |
Annual Output Value | Above US$ 2 Million |
Main Markets | Mid East, Africa, Europe, America |
Company Certifications | ISO 9001:2008; |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Tianjin; Qingdao |
Export Percentage | 50% |
No.of Employees in Trade Department | 300 People |
Language Spoken: | English; Chinese; Spain; Alabic |
b)Factory Information | |
Factory Size: | Above 20,000 square meters |
No. of Production Lines | 4 |
Contract Manufacturing | OEM Service Offered; Design Service Offered |
Product Price Range | Average |
Send your message to us
SAE 100 R12 High Pressure Rubber Hose
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000M m
- Supply Capability:
- 80000 Meter Per Month m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords