Radiate pine LVL Scaffolding Plank/Board for construction
- Ref Price:
-
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 3000 m³/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LVL Scaffolding Plank
Laminated Veneer Lumber Scaffolding Board for construction
Features:
1) Dimensions: length: 1980/2980/2500/3900/3980/5980( length within 12 metres)
width: 220/225/230mm
thickness: 38/39/42mm
we may manufacture kinds of sizes according to clients' requirements.
2) Material: Radiate Pine from New Zealand
3) Adhesive: WBP glue ( Environment Friendly )
4) Produce Ability: 60,000CBM/Year
5) Standard:
We are applying an inspection certification from third party agency, now we are instructed under its China agent.
6) SGS Test Report by according AS 1577-1993
7) Usage:
LVL is used primarily as structural framing for residential and commercial construction and is well suited to applications where open web steel joists and light steel beams might be considered. Others uses include scaffold planking and as flange members for some proprietary prefabricated wood I-Joists. LVL can easily be cut to length at the jobsite.
Application: For use as scaffold platforms or decks in accordance with U.S. Department of Labor Regulations (OSHA) or British Standards
Material: Structural laminated veneer lumber (LVL)
Standards: AS/NZS 4357:1995 Structural laminated veneer lumber GB/T 20241- 2006 Standard for laminated veneer lumber ANSI A10.8 – 2001, Safety Requirements for Scaffolding OSHA, Occupational Safety & Health Administration, U.S. Dept. of Labor, Regulations (Standards – 29 CFR) Scaffold Specifications – 1926 Subpart L, Appendix A BS 2482 Specification for Timber Scaffold Boards
Species Used: Plantation forest Radiata Pine
Adhesive & Bond: Phenolic, Type A (WPBP) Bond
Section Size: 38、39、42mm thick x 220、225、230mm wide (Tolerances, -0, +2mm)
Moisture Content: 6% to 18%
Lengths: To customer specification up to 12000mm (Tolerance, -0mm, +10mm)
Approximate Mass: 580kgs/M3
Strength & Stiffness 1) Batch sampling of LVL from production and testing for Verification: Modulus of Elasticity and Modulus of Rupture 2) Boards proof loaded and rigidity measured for verification of strength claims
Edge Branding: OSHA, BS2482, PROOF TESTED SCAFFOLD BOARD, MM/YY
Finish: Unsanded faces, sawn edges, arrisses chamfered (to prevent splintering), ends painted (to inhibit moisture egress/ingress)
- Q:Classification of plywood for construction
- if you want to make outdoor use of wood products, you can use E1 (even E0 level) phenolic plasti
- Q:What are the plywood specifications?
- The physical and mechanical properties of the plywood are described in terms of moisture content, density, thermal conductivity, and bonding strength
- Q:What is the plywood made of wood?
- Plywood is cut from the wood section into a veneer or cut from the wooden square cut into thin wood, and then made of adhesive glue from the three or more layers of plate-like material
- Q:According to the different composition of the glue, for the construction of plywood with the following types of glue
- High-quality urea-formaldehyde glue / melamine glue / phenolic glue can reach E0 level, E1 level, that can be used directly for indoor
- Q:One of the commonly used materials for furniture is a wood-based panel
- usually its table and the inner plate symmetrically arranged in the center layer or plate on both sides.
- Q:Plywood is generally used in applications where the strength and stability of the material are relatively high
- . It can do the floor of the container and other buildings and factories that need to be gravitational, and can be used as a scaffolding. Liquefied gas transport isolation box and so on.
- Q:What are the defects of the plywood?
- unsound section unsound knots The decaying part of a section of a child does not exceed 1/3 of the knot.
- Q:How is the current market outlook for plywood?
- Although China plywood has developed rapidly, but still encounter the EU and other importing countries of the anti-dumping complaints
- Q:How to use building plywood?
- Four types of plywood for the tide resistant plywood, used in the indoor normal, general purpose plywood with beech, linden wood, ash, birch, elm, poplar and so on.
- Q:Plywood quality requirements include appearance level, size, physical and mechanical properties of the three elements.
- Plywood should be shipped with the factory quality inspection department of product quality certification, specify the type of plywood, specifications, grade, bonding strength and moisture content.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Radiate pine LVL Scaffolding Plank/Board for construction
- Ref Price:
-
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 3000 m³/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
