PVC Foam Board PVC ABS Component Customerized PVC Foam Sheet Size 1560*3050mm Tickness 5-20mm
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 500 kg
- Supply Capability:
- 500000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
White Waterproof Rigid PVC Foam Board
Product Description
Width: 1560mm
Length: 3050mm
standard size :1560*3050mm
NOTE: we can make other size according customer requirment
payment | L/C,T/T |
Delivery | 6-9days after confirm your order |
PVC foam board/sheet description
1 | Product | PVC Foam sheet |
2 | Standard size | 1560mm × 3050mm |
3 | Thickness | 5-20mm |
4 | Density | 0.45g/cm3 |
5 | Color | White, Black, Red, Green, Pink, Grey, Blue, Yellow, etc |
6 | Executive standard | QB/T 2463.1-1999 |
7 | Certificate | ISO、SGS PONY Cetification |
8 | Weldable | Yes |
9 | Foam Process | Celuka |
10 | Packing | Carton box or wooden pallet packing |
11 | production capability | 500000 pcs per month |
12 | Life Span | >50 years |
13 | Flame retardance | self-extinguishing less than 5 seconds
|
Application
1. Advertisemen Board and sign board
2. the advertisement sheet for printing,engraving,cutting,sawing
3. Architectural decoration and upholstery
4. decoration for partition wall and shopwindows
- Q:Are plastic sheets suitable for food contact?
- Yes, plastic sheets can be suitable for food contact, as long as they are made from food-grade materials that meet specific safety regulations and standards. It is important to ensure that the plastic sheets are free from harmful chemicals and toxins that could potentially contaminate the food.
- Q:Can plastic sheets be used as a barrier against gases?
- Yes, plastic sheets can be used as a barrier against gases. However, the effectiveness of the barrier depends on the type of plastic and the specific gas being blocked. Some plastic materials, such as polyethylene or PVC, have low gas permeability and can effectively block certain gases. However, other gases may diffuse through plastic sheets over time. Therefore, the selection of the appropriate plastic material and thickness is crucial for creating an effective gas barrier.
- Q:Are plastic sheets resistant to warping or bending over time?
- Yes, plastic sheets are generally resistant to warping or bending over time, especially if they are made from durable materials such as polycarbonate or acrylic. However, the level of resistance may vary depending on the thickness and quality of the plastic sheet.
- Q:I have some pages of transparency sheets (for printing overhead transparencies on a standard inkjet or laser printer) that I want to glue to a Plaskolite board so that the glue won't show. Flexibility is not an issue, so it doesn't matter how stiff the dried product is, but it MUST be as clear-drying as possible, and if such a thing exists in an acid-free or archival form, that would be even better (but not necessary).Thanks!
- what you have is robust sufficient for a starter. you besides mght desire a glass of water to skinny down the paint , and palette knife (optionally available) to blend the colorings on your palette. No, you do no longer would desire to gesso it returned ! and additionally do no longer verify you clean your brushes with cleansing soap and heat water after each and each portray consultation. stable success and characteristic relaxing !
- Q:Can plastic sheets be used for protective barriers in laboratories?
- Yes, plastic sheets can be used as protective barriers in laboratories. They are commonly used to create partitions, shields, or enclosures to protect against chemical splashes, contaminants, or airborne particles. Plastic sheets are often chosen for their transparency, flexibility, and resistance to corrosion, making them suitable for creating barriers that meet safety and regulatory requirements in laboratory settings.
- Q:Are plastic sheets chemical resistant?
- Yes, plastic sheets can be chemical resistant. The level of resistance depends on the type of plastic used and the specific chemicals they are exposed to. Some plastics, like PVC, acrylic, and polycarbonate, have good chemical resistance properties, making them suitable for various applications where exposure to chemicals is a concern. However, it is important to consider the specific chemical and consult the manufacturer's specifications to ensure the plastic sheet's compatibility and resistance to a particular chemical.
- Q:Can plastic sheets be used for skylight domes?
- Yes, plastic sheets can be used for skylight domes. Plastic materials, such as polycarbonate, acrylic, or fiberglass, are commonly used for skylight domes due to their durability, lightweight nature, and ability to transmit natural light. These plastic sheets are often designed to be impact-resistant, UV-resistant, and provide insulation properties, making them suitable for skylight applications.
- Q:Under the temp. probe, and under the heater, obv. And these go under the liner, right? Electricity and water together = bad deal!So have I found the right answer?Bed is in chilly room in cold house, soft-sided with wooden frame. Will of course be using woolen, polyester, blankets on top, or maybe put the fake eiderdowns under bottom sheet and use the wool etc. over top sheet. Point is that bed will stay covered with warmth-keepers just about all the time.Am thinking of running the foil up along the side-walls. I intend to tape the sheets together into a complete large sheet.Had planned to use insulating rigid foam but decided was too much work to replace the home-made frame. Am hoping that the foil will reflect heat back into the water, not out into room.Furnace is forced-air, and electric bill in winter is Awful! IMO, at least.
- I doubt aluminum foil has much, if any, R-value, but I'm not an HVAC guy. I do know that pink styrofoam doesn't have much R-value unless you go several inches thick. Maybe try surrounding the bed in about 6 of the styrofoam on all sides. Use HVAC foil tape to seal any seams. Then mask it all in something like tileboard.
- Q:Is it possible to melt down plastic bags or bottles to make transparent sheets for a house's roof?
- In practice no - at least not on a domestic scale. The structure of most plastics would break down and the material would weak, become brittle or even carbonised, at least locally. Your chances are negligible of controlling the process (temperature) accurately enough (for those few plastics for which it may be possible) to get a viable material. Try it with a few small samples. Then just buy some plastic sheeting.
- Q:I'm about to print a large quantity of designs on transparent plastic sheets. My question is are these sheets used inkjet printing the same as the transparent plastic sheets used in copiers?I know that copiers and laser printers use heat to fix the powder on the paper or the plastic sheet but will the same plastic sheet give me a good quality and fixed ink (can't be removed by fingers) in an inkjet or should I use a specific type of these transparent plastic sheets? If so, what's the name of this kind of plastic sheets?---Regards,Ahmed Elblasy
- Rub the transparent sheet with fine sandpaper. Vice versa - polish it with successively finer grades of polish.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Foam Board PVC ABS Component Customerized PVC Foam Sheet Size 1560*3050mm Tickness 5-20mm
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 500 kg
- Supply Capability:
- 500000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords