PTP Foil Cold-forming Foil Alu-alu Foil Pharmaceutical Foil
- Ref Price:
-
$2,600.00
/ m.t.
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
1.History about aluminum
Aluminium foil is produced by rolling sheet ingots cast from molten billet aluminium, then re-rolling on sheet and foil rolling mills to the desired thickness, or by continuously casting and cold rolling. To maintain a constant thickness in aluminium foil production, beta radiation is passed through the foil to a sensor on the other side. If the intensity becomes too high, then the rollers adjust, increasing the thickness. If the intensities become too low and the foil has become too thick, the rollers apply more pressure, causing the foil to be made thinner.
The continuous casting method is much less energy intensive and has become the preferred process.For thicknesses below 0.025 mm (1 mil), two layers are usually put together for the final pass and afterwards separated which produces foil with one bright side and one matte side. The two sides in contact with each other are matte and the exterior sides become bright, this is done to reduce tearing, increase production rates, control thickness, and get around the need for a smaller diameter roller.
2.Specification
pharmaceutical foil
Application: PTP foil， cold-forming foil， aalu-alu foil
Alloy: 8006/ 8011/ 8079
Temper: H18/O
Thickness& Tolerance: 0.02mm-0.09mm(±6%)
Width& Tolerance: 200mm-1650mm(±1mm)
Mechanical Properties: Tensile Strength(U.T.S)≥160Mpa, Elongation≥1%
Standard: GB/T31988/ASTM-B209/EN546
3.Application
Application: PTP foil， cold-forming foil， aalu-alu foil
4.Pictures
5.FAQ
1)Can we supply samples?
Yes, we can!
2)What can you do if you have other quastions?
You can contact us freely at any time!
3)How about our payment term?
LC and TT and other.
- Q:Can any herb or combination of spices replace Pandan leaf in a recipe? Trying to cook Indonesian food but the leaf is the only thing not availble in my city.
- Well you canbut I wouldn't recommend itNot only would you ruin the panheating the plastic in the oven releases toxic gases at certain temps, thus poisoning the foodAnd it will put toxic gases into the air.
- Q:The current in a 2.20 mm X 2.20 mm square aluminum wire is 1.00 AWhat are (a) the current density and (b) the electron drift speed?
- (a) To find current density (J), the equation is just J I / A, where I the current and A is the area of the surface In this case I 1.00 Amp and the cross sectional area A isn't given, but you can find it using 2.20mm x 2.20mm Don't forget though to convert mm into m before dividing the current by area, to get m^2(1000mm 1m - 2.20mm 0.0022m) A 0.0022m(0.0022m) 4.84E-6 Thus, you have J (1.00A) / (4.84E-6) 206611.57 A/m^2 (b) The electron drift speed can be found using this equation: v J/nq, where v is the drift speed you are trying to find, J is the density you just found, q the charge of an electron, and n the number of charges carried per unit volume (the electron density)For aluminum n 6.02E28 electrons/m^3 So v 206611.57 / ((6.02E28)(1.6E-19) in m/s v 2.15E-5 m/s
- Q:How many electrons will each element gain or loose in forming an ion for the following elements?acalcium (Ca)bflourine (F)caluminum (Al)doxygen (O)
- acalcium will generally want to give two elections because it has 2 valence elections and a charge of +2 bfluorine will generally want to gain one election because it has 7 valence electrons and a charge of -1 caluminum will generally want to give away three because it has 3 valence electrons and a charge of +3 doxygen gain two elections because it has 6 valence elections and a charge of -2 i believe you can find in written on some periodic tables.
- Q:Confusing recipe directions.?
- Pulse to combine is a reference to a food processorYou can hand chop the mixture finely or use a blender on very lowFoil can be used as a replacement but put some oil on it to prevent stickingCrimp with a fork to seal the edges of the doughZuchinni, carrots, peas and cooked potatoes would all be good in it.
- Q:PC Fanboys please click the 'back' button if you're going to tell me not to buy a mac, thanksI really like the sleek, beautiful design of the Macbook Air and it's aluminium unibodyThe Macbook Pro is too expensive, but I can afford the Macbook Air White MacbookI've heard the White Macbook's plastic scratches a lot get's dirty easilyMost people who buy Macbook Air's are frequent travellers, but I rarely leave my houseI really do like it's thin and small size though, aswell as the designShould I get it? Thanks.
- Calculate the potential energy when the car is lifted (weight X distance)The energy stored in a spring is (1/2)K (derformation squared)The energy will be conserved.
- Q:how many grains of sand are on a beach?????, the size of the beach would be one mile long!?
- My personal experience with unionsI worked for a corporation that had both union and non-union shopsThe non-union shop outproduced the union shop by a HUGE margin, even though it employed less peopleThe non-union shop had fewer quality problems and accidentsThe non-union shop was profitable and the union shop lost tons of moneySo yes, if I owned a business and it became unionizedI'd close it and move ASAP And, it's not just about salariesit's about quality of work as well.
- Q:I'm using wilton perfect performance ultraI bought it at wal martWilton Perfect performance ultra set of 3 springform pansI've never used this kind of pan beforeTheres no instructions how to use it,just a recipe on the backIn the lemon cheesecake recipe it says quot;place shallow pan of water on bottom rack of ovenquot; Do you always do that? Place springform on cookie sheet if desired.quot;turn off oven,leave door closed for 1 hour.quot; So after the cake is done leave it in the hot oven for an hour or leave the lid on the cake?! Anyway I'm going to make this.Strawberry Cheese TartCanola oil cooking spray12 sheets low-fat graham crackers, crushed1/2 cup Grape-Nuts? cereal1 tablespoon canola oil2 tablespoons orange juice2 1/2 cups low-fat ricotta cheese1/2 cup plain nonfat yogurt1/3 cup granulated sugar1 tablespoon lemon juice2 teaspoons vanilla1/3 cup chocolate chips2 cups sliced strawberries2 tablespoons
- I never put the pan of water in the ovenNor do I ever bake anything in a water bathTo use the springform pan, just make sure the bottom is in very securely and straightI don't even know what brand I have, but depending upon if the crust I'm making is really buttery or not, it sometimes leaks through, so I always put aluminum foil around the bottom of the panFor recipes, use the baking instructions they give for the crust or cakeI do have one cheesecake recipe which is very dense, and for that, after the baking time recommended, I do leave it in the oven for about 40 minutes as the heat recedes, just to ensure it is baked all the way throughUsing the springform pan, after the cake is done, let sit at room temperature to cool down, then refrigerate if it's a cheesecakeI don't take off the outer rim til after it's chilledGood luckYou never know how something works til you try it!
- Q:When I bought a tube to pull people behind by boat (14ft Grumman side console aluminum with 15hp Johnson 2-stroke, top speed 19mph) I figured buying the one that would have the least contact with the water (and therefore least drag) would give me the best shot at planing people out on the tubeWhen I went to try it out, the tube would plane out great for my 130lb girlfriend, but not me (205lb)I am now wondering if I could have bought a different tube, maybe with more surface area, that would allow me to plane out too.
- NopeWhat you need is more horsepowerYour little 15hp outboard just doesn't have the juice to pull your weight.
- Q:Which reagent is the limiting reactant when 0.650mol Al(OH)3 and 0.650mol H2SO4 are allowed to react?How many moles of Al2(SO4)3 can form under these conditions?How many moles of the excess reactant remain after the completion of the reaction?Please and thank you
- The tail lamp wiring harness assemblies are infamous for failing on those fashionsluckily they are no longer lots extra durable to swap than the bulbs you have already replacedYour interior sight broking in all probability has them in inventory, they incorporate new sockets and appropriate wiringi won't be ready to quote a cost for you despite the fact that, this is been some years considering I actual have replaced them, won't be ready to remember what they feestable success.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PTP Foil Cold-forming Foil Alu-alu Foil Pharmaceutical Foil
- Ref Price:
-
$2,600.00
/ m.t.
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
Related keywords
