PP Staple Fiber
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 TON m.t.
- Supply Capability:
- 2000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Denier: 3D-18D
2.Cut length: 32MM-64MM
3.Packing: PP bale
4.Weight: 220kgs~260kgs per bale
Usage of PP Staple Fiber:
stuffing and packing of toy, pillow, sofa, seat cushion and leaning cushion; thermal insulation lining of shoes, gloves, cap and garment and so on; raw material of spray finishing cotton, gel-free cotton, hardening cotton and nonwovens.
Specifications of PP Staple Fiber:
1. Denier: 3D,6D, 7D, 10D, 12D, 15D,18D ;
2. Cut length:32MM,51MM,64MM;
3. Siliconized and non-siliconized;
4. Different color grades: raw white, pure white,super white,green;
5. Packing: pp baled;
6. Weight: 220kgs/bale;
7. All fibers are manufactured using the best recycled PET flakes imported from Europe;
8. Have been exported to quite many countries and regions such as America, Europe ,South America and Middle east and so on ;
- Q:What is plastic fiber?
- In plastic fiber, moisture detection is very important. It can be measured by SFY-100 plastic moisture content tester. It is quick, convenient and easy to operate,The definition of plastic (United States plastics industry association) - all or part of the carbon and oxygen, hydrogen, nitrogen and other organic and inorganic elements combined into a solid, at the final stage of manufacture, in the manufacture of some stage is liquid, which can heat or pressure, or two and by the way, the the formation of various shapes, this huge and any kind of material in the race, be the most changeful, can be called the plastic.
- Q:Can half water fiber white gypsum powder be used as plaster mould?
- Half water gypsum and water ratio of about 3 to 2, is to add cold water gypsum, stirring, and then the gypsum slurry into your mold, generally in 5 to 7 minutes to complete the preliminary setting, is formed, and then one day you can dry.
- Q:Which is better, polyester fiber or silk?
- The good, only difference between silk and chiffon, polyester fiber (polyester fibre) synthetic fiber polyester by organic acid and diol which is prepared by spinning the. A large number of industrially produced polyester fibers are made from polyethylene terephthalate, a Chinese product called polyester. It is the largest variety of synthetic fiber at present. Pure silk generally refers to silk, including mulberry silk, tussah silk, castor silk, cassava silk and so on. Silk is called "fiber Queen", because of its unique charm, has been favored by people of all ages. Belong to protein fiber, silk, silk contains 18 kinds of beneficial to human body amino acid, can help skin maintain the membrane surface The new supersedes the old. it can make the skin keep moist, smooth. But easy to wrinkle, laundry should also pay attention to, not to bad
- Q:What is a review of fiber anti cracking agent?
- The composite material with high crack resistance and impermeability is composed of high expansion components, composite fibers, special water retention components, modified groups and various materials.
- Q:What's the difference between polyester fiber and viscose fabric? Which cost is higher?
- Polyester fiber, commonly known as polyester, polyester, the drawback is airtight, do not sweat, is a lot of clothes, socks, there are ingredients, a cheaper kind
- Q:Carbon fiber bicycle, advantages and disadvantages
- Advantages of carbon fiber bicycles:1, light weight. The carbon fiber is less than 1/4 of steel, and the frame weight is made of carbon fiber. It is 1/4 of the common alloy frame.2, impact absorption is good. Carbon fibers are used in making special springs and are used in various fields because they absorb shock and have excellent performance. A bicycle without a shock absorber can also be made3, modelling is easy. A variety of shapes of frames can be made from carbon fibers. Because a fiber sheet is spread on the mold, and then flows into the resin and burns solid, it can be made into a carbon fiber frame with various shapes, which is very convenient.
- Q:What's the difference between a gold tube and a carbon fiber?
- Carbon fiber is a new kind of fiber material with high strength and high modulus fiber with carbon content of more than 95%. It is a flaky graphite, microcrystalline and other organic fibers stacked along the axial direction of the fiber, obtained by carbonization and graphitization of microcrystalline graphite material. Carbon fiber "an hand in a velvet glove lighter than aluminum," the quality, but the strength is higher than that of steel, and has the characteristics of corrosion resistance, high modulus, in the national defense and civilian areas are important materials. It has not only the intrinsic characteristics of carbon materials, but also the softness and processability of textile fibers. It is a new generation of reinforced fiber.Carbon fiber has many excellent properties, carbon fiber axial strength and high modulus, low density, high performance, no creep, non oxidation under the environment of high temperature resistance, good fatigue resistance, between heat and electrical conductivity between the metal and non metal, smaller thermal expansion coefficient and anisotropy, good corrosion resistance, X Radiability good. Good conductivity, thermal conductivity, good electromagnetic shielding, etc..
- Q:100% does polyester fiber stretch?
- The strength and elasticity of polyester fiber polyester fiber has the advantages of high recovery capability, so the fastness and durability, anti crease. It's good lightfastness, other than acrylic difference, the light is more powerful than natural fiber fabric, especially in the glass behind the light ability is very good, almost be roughly the same with acrylic. In addition, polyester fabrics resistant to a variety of chemicals, good performance, acid and alkali damage to them are not large, while not afraid of mildew, but also not afraid of moth eaten.
- Q:How to distinguish between seven and four hole fiber fiber
- Chemical fiber after drilling is very soft, easy recovery, built for a long time, will not be like the cotton is pressed compacted harden, as long as the regular beat, you can restore the original shape, the quilt can keep fluffy.
- Q:Do you have two kinds of eyelashes fiber, white and black?
- Yes, there are two kinds of eyelash fiber, white and black.
1. Manufacturer Overview |
|
---|---|
Location | Jiangsu,China |
Year Established | 2003 |
Annual Output Value | US$10 Million - US$50 Million |
Main Markets | 68.00% Domestic Market 7.00% Eastern Europe 5.00% Mid East 4.00% Western Europe 3.00% South America 2.00% Southern Europe 2.00% Southeast Asia 2.00% South Asia 2.00% Africa 2.00% North America 1.00% Eastern Asia 1.00% Central America 1.00% Northern Europe |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | shanghai,ningbo |
Export Percentage | 51% - 60% |
No.of Employees in Trade Department | 6-10 People |
Language Spoken: | English, Chinese |
b)Factory Information | |
Factory Size: | 30,000-50,000 square meters |
No. of Production Lines | 4 |
Contract Manufacturing | OEM Service Offered Design Service Offered Buyer Label Offered |
Product Price Range | High and/or Average |
Send your message to us
PP Staple Fiber
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 TON m.t.
- Supply Capability:
- 2000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords