PET PP strap band tape production line / PET PP packing tape band production line / PET PP packing strap extrusion line
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PET PP strap band tape production line / PET PP packing tape band production line / PET PP packing strap extrusion line
Products model:
Width: 9mm-25mm (can be adjusted according to client's production demand easily)
Thickness: 0.5mm-1.2mm (can be adjusted according to client's production demand easily)
Capacity: 1T-2T/Day(24 hours)
Total power: 120kw-160kw (380V, 50Hz)
Accurate dosing and raw material blending
Preheat and dry circulating automatically
Even plastication,stable extrusion and exact temperature control
Measuring pump ensure consecutive and stable production
Big hauling force strething device and insulation oven
Big capacity stainless steel water trough,automatic liquid level control
band width | 9-32mm |
production linear speed | 80m/min |
strech ratio | 4-9 |
max.output | 60-200kg/h |
plastic pet strap machine line configuration reference
No | Name | Qty. |
1 | Vacuum loader | 1set |
2 | CSG2000 dehumidify dryer | 1set |
3 | S90/33 single screw extruder(can be adjusted according to client's demand) | 1set |
4 | Hydraulic screen exchanger | 1set |
5 | Melt pump | 1set |
6 | Mould | 1set |
7 | Water tank cooling system | 1set |
8 | Haul-off machine | 1set |
9 | Heating oven | 1set |
10 | Preheating machine | 1set |
11 | Drawing machine | 1set |
12 | Embossing machine | 1set |
13 | Hot forming machine | 1set |
14 | Haul-off | 1set |
15 | Winder (double position) | 2sets |
16 | Chiller | 1set |
17 | Mould temperature controller | 2sets |
Features of pet strap machine / pet strap production line :
1.Adopts advanced CSW-800 comby dehumidify dryer system. It make sure the material humidity at 80PPM at 50PPM dew point. Meanwhile, it compact material and increase the viscidity.
2.Adopts closed cycle transport system after dryer to avoid contact with outside air and make sure the material be dry continuously.
3.Extruder adopts special screw for PET. The screw has unique separate and mix property to make sure uniform plasticizing. The screw suitable for recycled PET bottle flakes, PET mixture and original PET material. And the extruder adopts ration forced feeding to make sure the stable extruding. It makes sure the product uniform.
4.Produce different model product at one die and mould. Adopts hydraulic screen exchanger
5.Static cooling roller replace the water cooling tank. The roller will cool the strap at the constant temperature. It improves the product's stretch intensity.
6.The strap after formed will be warm and anneal treated to wipe off the part stress remained after stretch. It makes molecule tropism be steady to avoid strap distortion caused by storage.
7.The winder adopts double work position and auto-meter. It is easy operation and convenient coil change.
8.Centralized electrical control, PLC self-correcting control. Easy operation.
- Q:What kind of equipment do you need for the food market? How much would you like to invest? What about the profit?
- The first said equipment 1 blowing machine 2 printing machine 3 bag making machine 4 mill material if want to make your own words also need about 27000 granulating machine, film blowing machine, printing machine if printing a color around 10 thousand,
- Q:What is plastic processing of moulds?
- For a combined plastic mold, injection molding, compression molding, extrusion blow molding and low foaming, which mainly comprises a die having a variable cavity composed of concave die and die combination of substrate components and die combination lock plate, the convex die combination substrate, punch assembly, punch card has a convex combination the composition of the core mold variant plate, cavity blocking assembly and side cutting plate. The coordinated change of die, punch, die and auxiliary forming system. Can be processed in different shapes, different sizes of series of plastic parts. Plastic processing industry and plastic molding machine matching, give plastic products with complete configuration and precise size tools. Because of the plastic varieties and processing methods of various plastic molding machine and plastic product structure is simplified, so the plastic mold of the type and structure is various.
- Q:Plastic food bags processing machines where there is ~ how much is the price, I know
- Go to the food processing machinery network to see, the price is not good, mainly depends on your needs, there are thousands of yuan, there are also tens of thousands of dollars...
- Q:ABS plastic processing flow
- ManufacturabilityABS is an amorphous polymer with no apparent melting point. Because of its grades, grades, in the injection molding process should be based on the different grades to formulate the appropriate process parameters, generally in 160X: above, 270C can be formed below. Because the temperature is too high, there is a tendency to destroy the rubbery phase in ABS and begin to decompose over ZTOC. In the process of molding, ABS has better thermal stability, wider range of choice, and it is difficult to degrade or decompose. Moreover, ABS melt viscosity is moderate, its fluidity is better than the polyvinyl chloride, the polycarbonate and so on, moreover, the melt cooling solidification speed is relatively quick, generally in 5 ~ 15S can be cold solid. The mobility of ABS is related to both injection temperature and injection pressure, where the injection pressure is slightly more sensitive. Therefore, in the process of forming hand from the injection pressure to reduce the melt viscosity, improving the filling performance. ABS because of the different components, the performance of different water absorbent and adhesion, the adhesion and absorption of water between 0.2 ~ 0.5% and sometimes up to 0.3 ~ 0.8%, in order to get the products ideal for the drying process, before molding, the moisture content below 0,1%. Otherwise, the surface will appear on the silver bubble,.
- Q:I want to make some plastic products. Thank you。 FiveThe four type: first, a one or two meter long, hard, but bent plastic tube. Then there's something like the front end of the syringe. And then a small plastic kettle. Finally, a small thing that can be secured to the mouth of the pipe.
- Second similar things syringe I suggest: as long as you can find a think suitable syringe or other similar things, then take it to the more small machinery plant hopes to solve the problem (fourth questions refer to the answer); two cases of third problems, as long as one or several that simply.
- Q:I am engaged in the plastic processing industry, mainly for ABS and PP through chemical agent for processing, will this be harmful to the body?
- Alkyl tea sulfonate (ABS) can not only poison the body, but also promote carcinogenic effects of carcinogens. Recently, it has been found that ABS also has the risk of teratogenic changes.Polypropylene (PP) itself is non-toxic, but I do not know what you say powder ingredients, if there are plasticizers, masterbatch and the like, there is a certain toxicity.In the production of ABS containing detergent factory, should pay attention to do a good job of environmental protection, adopt cleaner type production process, in the production process to be closed, to reduce the concentration of ABS in the air of workplace and workers to do protective measures. Some large metal washing plants, paper mills, leather factories, food factories, etc., should be used in the use of mechanized operation, reduce manual operation, prevent long time direct contact with the skin. Pregnant women should change jobs appropriately so as not to influence the next generation. The waste water discharged by the factory should be discharged after the sewage treatment has been purified to meet the national discharge standard so as to ensure that our groundwater resources are free from pollution.
- Q:What are the requirements of customers for nylon plastic products?
- The advantage of nylon nylon is that its thermal properties, mechanical properties, flame retardance and barrier properties are higher than pure nylon, and its manufacturing cost is equal to that of ordinary nylon. Therefore, it is very competitive.The flame retardant nylon for electronic, electrical and electrical appliances is increasing day by day, and green flame retardant nylon is paid more and more attention by the market.Antistatic, conductive nylon and magnetic nylon will be the preferred materials for electronic equipment, mining machinery and textile machinery.Research and application of the processing aids, will promote the function and modification of Nylon high performance process.The application of the integrated technology, the fine product is the impetus of the development of the industry.If you make nylon products, there are a lot of directions to choose from.
- Q:The main plastic of plastic products
- Polyethylene plastics (Polyethylene) are polymers of ethylene monomers. The raw material for production is oil, coke oven gas or alcohol. Industrial production of polyethylene usually by ethanol dehydration, acetylene catalytic hydrogenation or high temperature cracking. Its commodity name is abbreviated as "B plastic"; the English abbreviation is "PE". Because the density of polyethylene is different, it is divided into low-density polyethylene.[PE (L)], medium density polyethylene [PE (M)] and high density polyethylene [PE (H)].The molecular formula of polyethylene is: (- CH2, CH2 -) n. It is linear in geometry and theoretically has no branched chain and is prone to crystallization. Usually the polyethylene molecule is composed of crystalline and amorphous state in high elastic interlaced region; crystalline polyethylene plastic gives high hardness, strength, chemical stability; amorphous region with polyethylene plastic higher flexibility, toughness, transparency etc.. In fact, polyethylene macromolecules are not absolutely free of branched chains. Its crystallinity is different, density is different, physical and mechanical properties are also different.
- Q:I would like to ask you how to produce plastic products, the need for mold, but also the need for large machinery, thank you all
- It depends on what kind of plastic products you make General use of the daily use of injection molding machines, water pipes, profiles, sheets need extruder, film type needs blowing machine, bottles need blowing machine, no matter which kind of mold is needed.
- Q:How much would you like to invest? ThirtyI want to make a wet paper towel and a paper napkin processing factory here. It is specially distributed to hotels, hotels and so onAs the local do not do such packing bag manufacturers, each time from the field of purchase, so I want to do a plastic bag processing plant, so here to consult you. What equipment and materials do you need?
- Film blowing machine, bag making machine, printing machine, raw material, PE granule, printing ink
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PET PP strap band tape production line / PET PP packing tape band production line / PET PP packing strap extrusion line
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords