Monocrystalline Silicon Solar Panels
- Ref Price:
-
$0.66 - 0.80
/ watt
- Loading Port:
- Shanghai
- Payment Terms:
- TT
- Min Order Qty:
- 100 watt
- Supply Capability:
- 100000 watt/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introductions of Monocrystalline Silicon Solar Panel
CNBM Solar photovoltaic (PV) Panel is designed for large electrical power requirements.
It is the optimal choice for both on-grid and off-grid power systems.
CNBM Solar panel offers high performance of power per square foot of solar array.
Monocrystalline silicon(c-Si): often made using the Czochralski process.
Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon.
Hence most c-Si panels have uncovered gaps at the four corners of the cells.
Characteristics of Monocrystalline Silicon Solar Panel
I Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.
II Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.
III EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.
IV AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.
V Junction box: Multi function junction box with water proof.
VI Long lifetime: ≥25 years; Less power decrease.
VII Good performance of preventing from atrocious weather such as wind and hails.
Advantages of Monocrystalline Silicon Solar Panel
Characteristics of CNBM Solar Monocrystalline Series (45W-65W)
Max Power Voltage Vmp (V) | 17.8V | 18.0V | 17.6V | 17.8V | 18.0V |
Max Power Current Imp (A) | 2.53A | 2.78A | 3.13A | 3.37A | 3.61A |
Open Circuit Voltage Voc (V) | 22.4V | 22.6V | 22.2V | 22.4V | 22.6V |
Short Circuit Current Isc (A) | 2.74A | 2.97A | 3.35A | 3.61A | 4.36A |
Max Power Pm (W) | 45W | 50W | 55W | 60W | 65W |
Temperature Coefficient of Cells of CNBM Solar Monocrystalline Series (45W-65W)
NOCT | 47℃±2℃ |
Temperature Coefficients of Isc (%/℃) | 0.064 |
Temperature Coefficients of Voc (%/℃) | -0.33 |
Temperature Coefficients of Pmp (%/℃) | -0.45 |
Mechanical Data of CNBM Solar Monocrystalline Series (45W-65W)
Power | 45W/50W | 55W/60W/65W |
Dimension | 630×550×30mm | 820×550×30mm |
Weight | 4.5kg | 5.5kg |
Tolerance | ±3% | ±3% |
The dimension of the modules can be changed according to the demand of clients
Limits of CNBM Solar Monocrystalline Series (45W-65W)
Operating Temperature | –40 °C to +85°C |
Storage Temperature | –40 °C to +85°C |
Max System Voltage | 700V |
Guarantee of CNBM Solar Monocrystalline Series (45W-65W)
Products Guarantee | 2 yrs free from defects in materials and workmanship |
Performance Guarantee | No less than 90% within 10yrs and no less than 80% within 20yrs |
Certificates | IEC, ISO, TUV, CE |
Household Application
- Q:Can solar panels be used in multi-story buildings?
- Yes, solar panels can be used in multi-story buildings. They can be installed on rooftops or other suitable areas to generate renewable energy for the building.
- Q:I have a panel that quot;deep breatheproduces at 4% efficiency, what can it power, It's about 4ft by 2ft
- I sincerely doubt that you have a solar panel that is 4% efficient at converting sunlight to electricity.
- Q:Can solar panels be integrated into buildings?
- Yes, solar panels can be integrated into buildings through various methods such as rooftop installations, solar facades, and building-integrated photovoltaics (BIPV). These approaches allow for a seamless integration of solar panels into the building's structure, providing renewable energy generation without compromising the overall aesthetics or functionality of the building.
- Q:How much would it cost to make an average size house be able to depend on solar panels for all of its power?How many solar panels would you need and wear would you put them? Would the roof be large enough to support the panels needed?Do solar panels work well in higher latitudes like northern USA or southern Canada? Can you power your house for the whole year if you live in these environments? What kind of maintenance do solar panels require?
- There are several web sites you can search for and they will provide the answer on how big of a PV Solar Array you would need for your house. Several things need to be known, such as square footage of the home, how well the home is insulated, etc. The panels come in all sizes and wattage's depending upon application, so yes they should all fit on the roof. If you have a small roof get PV panels with higher wattage's. Yes, they will work in the northern latitudes but not as efficiently as near the equator. You might need more PV panels to make up the loss in power from the sun hitting at a lower angle. Generally, all you will need to do is periodically clean the glass covering of the PV Panels to get maximum sun light on the PV cells. In my region, near the 45 th parallel, a 600 square foot home with six inch insulated walls and R40 attic insulation can purchase a PV panel system for around $40,000. That includes the equipment to tie it into the power grid and the meter to measure how much you supply the grid during the day and how much you draw from the grid at night when the sun isn't shining. There are tax credits for retrofitting an existing home, but mostly it is new homes being built that are having the PV panel systems installed so the cost is added to the mortgage and the return on the investment is paid off over the life of the System (about 5 to 20 yrs.)
- Q:Can solar panels be installed on shopping malls or retail centers?
- Yes, solar panels can definitely be installed on shopping malls or retail centers. In fact, many shopping malls and retail centers across the world have already embraced solar energy as a sustainable solution for their energy needs. Installing solar panels on these commercial buildings not only helps reduce their carbon footprint but also provides long-term cost savings through reduced electricity bills. Additionally, solar panels on shopping malls can serve as a visible example of environmental responsibility, inspiring others to adopt renewable energy solutions.
- Q:about solar panel
- The answer depends upon the type of solar energy captured . Photovoltaic Solar Panels convert the energy into electricity. This electricity is ran throughout the building via wires. Thermal Solar Panels typically capture the energy in the form of heat. The hot water is circulated through the building in water pipes.
- Q:Any recommendations for companies? Any things to look out for?
- It strongly depends on where you live. In California or Hawaii, for example, solar can be cheaper than the power company, even without subsidies. Any incentives you get just make it better. Whatever you do, like any construction project, get 3 bids from different companies. If there are not 3 companies in your area, you are probably in a poor location for solar. Avoid any company that does a hard sell and tries to get you to commit immediately, or makes you uncomfortable in any way.
- Q:what is needed beside the panels and do you need an electrician to hook it up
- The main components for a solar electric system are the panels, racks for mounting the panels, and inverter to convert the panel's DC power to AC, which can be pumped into the grid if necessary. There would also be various electrical supplies involved - wire, conduit, possibly a switch and/or circuit breaker. On the paperwork side, there's a building permit, permission from the power company to connect, and some inspections. Although it could be done by a homeowner, it's not a trivial project, and the best way to get it set up is to contract a professional solar installer. They all give free quotes, and can explain your various options when they visit.
- Q:Can solar panels be used to power outdoor lighting?
- Yes, solar panels can be used to power outdoor lighting. Solar panels convert sunlight into electricity, which can be stored in batteries or used directly to power outdoor lights, such as garden lights, streetlights, or security lights. This allows for sustainable and cost-effective lighting solutions in outdoor areas.
- Q:I have a 2 volt deep cylce Everstart battery with 845 cranking amps, and a Grape Solar GS-S-250-Fab5 250-Watt Monocrystalline Solar Panel . I use them to power a 48Flat screen TV, a Roku, my 65 watt consuming MacBook Pro, and a 65 watt Fan.I know from previous experience that just the battery, an inverter, and the fan, that the fan will blow for 0 hours straight.Should I really be concerned with a Charge Controller?
- Should I really be concerned with a Charge Controller? Yes. The main purpose of the charge controller is to protect the battery from over charging. Over charging reduces battery life. And spending extra money for a MPPT type controller will get more more useable power out of your solar panel. Would another battery of the same magnitude be helpful in preventing an accident? How much storage capacity does your current battery have (measured in kWH)? A ~$20 Kill-a-Watt meter would take a lot of uncertainty out of how much power you actually use. Even deep cycle batteries suffer reduced battery life from deep discharges. The battery sounds too small for the loads you describe so I would think you would want more. ---------------------------------------... After reading the other answer In a nutshell, with your small 2 volt starting battery, 24 volt panel and a mix of unknown loads, (which is correct), I thought I would elaborate. I had not considered the possibility that you bought a 24 volt panel for your 2 volt battery. Hooking the panel you bought directly to the current battery is a horrible idea. I you were lucky it would just cook the battery in a short period of time. You basically bought the wrong type of panel for a 2 volt system. I assume that there are no controllers on the the market for this situation. If that's the case, I don't know of any good way match the 24v panel to the 2 volt battery.
1. Manufacturer Overview |
|
|---|---|
| Location | Jiangsu, China |
| Year Established | 2004 |
| Annual Output Value | Below US$1 Million |
| Main Markets | Australia；Asia；South East Asia; South America；North America； Europe；Africa |
| Company Certifications | ISO 9001:2008; CE; TUV; UL |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Shanghai |
| Export Percentage | 1% - 10% |
| No.of Employees in Trade Department | 200-300 People |
| Language Spoken: | English；Chinese |
| b)Factory Information | |
| Factory Size: | Above 8,000 Square meter |
| No. of Production Lines | 6 |
| Contract Manufacturing | OEM Service Offered；Design Service Offered |
| Product Price Range | Average |
Send your message to us
Monocrystalline Silicon Solar Panels
- Ref Price:
-
$0.66 - 0.80
/ watt
- Loading Port:
- Shanghai
- Payment Terms:
- TT
- Min Order Qty:
- 100 watt
- Supply Capability:
- 100000 watt/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
