High Quality Double Sided EVA Foam Tape DSE-15YM.
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- USD3000 roll
- Supply Capability:
- 30days for 1x20' FCL roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications Of High Quality Double Sided EVA Foam Tape DSE-15YM:
DS EVA foam tape is with hot melt adhesive. Usually the tape is with release paper.
2. The foam is of white color and black color. The release paper is of white color and yellow color. So, you can match the foam & the release liner as you like, such as white foam + yellow release paper.
3. Our EVA foam hardness is 38.
4. Mainly used for holding, indoor decoration, sealing, other industrial and household usage.
5. Two standard ways for cut roll packing: one roll per shrink & one roll per plastic bag. We can also offer special packing as per customer's requirements, such as label, core printing and sticker.
CONSTRUCTION Of High Quality Double Sided EVA Foam Tape DSE-15YM:
Backing: EVA Foam
Adhesive: Hot melt rubber adhesive.
Liner: Yellow/white paper
TYPICAL PHYSICAL PROPERTIES Of High Quality Double Sided EVA Foam Tape DSE-15YM:
Total Thickness (adhesives + backing): 1.5 mm
180° Peel Adhesion: more than 1.5 kgf/25mm (to steel)
Holding power: not less than 50h
Temperature resistance: 60C
Elongation: 130%
Sizes Of High Quality Double Sided EVA Foam Tape DSE-15YM:
Jumbo Roll: 1.00 x 200m
Cut Roll: As per customer's requirements
Remarks Of High Quality Double Sided EVA Foam Tape DSE-15YM:
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and be kept away wet and/or heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
- Q:The double-sided adhesive thickness 0.05~3mm, similar to A3, the A4 paper size? One by one?
- As you mentioned, these specifications need to be customized, and the thickness is from the 0.05MM-3MM,
- Q:PET what's the advantage of double-sided adhesive?
- I wonder if you are using this piece of industrial processing. If so, you can check it with Baidu
- Q:How to remove the double adhesive on the tile completely?
- 4, you can use an electric hair dryer to dry, and then gently scraping on it5, with cotton swabs dipped in a nail polish water.6, wiping fengyoujing.7, use special cleaning agent or sports shoe decontamination cream to wipe.8, with the drawing 4B rubber is very soft, that kind of Korean eraser can erase it.
- Q:The foam on the wall will not tear off the double foamIt is convenient to ask for a rib
- 1, wipe the face oil coated, and wipe evenly, first use the nail to cut him off, and then take a wet towel, wipe off.2, use the hair dryer blow, the glue baking heat can be got down.3, with Fengyoujing rub, then dropped.
- Q:There is double adhesive mark on the back shell of mobile phone. How can I clean it up?
- 1. Take a piece of dry cloth covered with vinegar and cover the whole area with double glue marks. When the adhesive on both sides of the adhesive is completely soaked, remove them with a ruler.
- Q:Does the adhesive force of double - sided adhesive have something to do with thickness?
- There is a certain relationship. An adhesive formula, it will have a reasonable thickness of the adhesive layer in order to achieve a variety of force balance
- Q:Construction method of butyl adhesive tape
- Single sided non-woven fabric, Yongxing adhesive tape, method of use(1) after the lighting board is installed on the frame, the lighting board seam will be bound and the parts of the adhesive tape will be wiped clean.(2) open the adhesive tape in the joint of the lighting board, then tear off the insulating paper on the edge of the compacted adhesive tape, and then install the aluminum alloy board on the lighting board. Secure with a waterproof screw.(3) on the lighting board and the wall joint, use one side aluminum foil adhesive tape to bond directly. 1, construction requirements(1) the performance indexes of tapes should be read carefully before construction so as to be suitable for the environmental temperature and humidity during construction.(2) according to different waterproofing membrane, different construction methods, choose different types, specifications of different sizes of Yongxing tape.(3) before construction, the quality of the aforesaid project shall be checked and accepted, and the waterproof layer shall be constructed after qualification.(4) according to the requirements of the engineering design and construction waterproofing, waterproofing and leveling layer bonded firmly, do not allow Konggu phenomenon, after the construction of waterproof layer should be protected.(5) the use of Yongxing parapet should pay attention to the tape, brick or concrete surface bonding parts of the firm and smooth surface, such as the poor, the application of cement paste for repairing yarn
- Q:How do you apply double-sided adhesive tape?
- 1, we put the plate, tape and paste roller at the same room temperature for a period of time before pasting;2, in the paste version, it is necessary to press the plate and affixed to the cylinder clean;3 if the plate is attached to the sleeve, the minimum air pressure must be used to prevent the sleeve from deforming;
- Q:What are the application areas of transparent double faced adhesive?
- The adhesive could stick to things, is in fact due to bond formation itself and for molecular connection items between molecules, the molecular bonding is able to firmly glued together.
- Q:What can cause double adhesive to lose stickiness?
- Toluene, xylene, tetrahydrofuran and other solvents, I do not recommend you to use, because they are mostly toxic, but also polycarbonate, PC/ABS and other notebook shell commonly used materials swelling.Finally, there is a trick, some adhesives at low temperatures will lose viscosity, with waterproof bag, put into the refrigerator freezer, cooling to about -20 degrees, take out pry...... I wonder if it is possible. (the glass temperature of some functional components of the adhesive is below -50 degrees, this method is not applicable).Heating also allows adhesive viscosity to decrease and strength to decrease and thus may be separated
1. Manufacturer Overview |
|
|---|---|
| Location | Guangdong, China |
| Year Established | 2007 |
| Annual Output Value | Above US$ 10 Million |
| Main Markets | Southeast Asia; South America; Eastern Europe; North America; Northern Europe; South Asia; Western Europe; Africa; Mid East |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Shenzhen |
| Export Percentage | 10%-20% |
| No.of Employees in Trade Department | 11-50 People |
| Language Spoken: | English; Chinese |
| b)Factory Information | |
| Factory Size: | Above 2000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | produce single sided tapes,double sided tapes, masking tape, Opp tape |
| Product Price Range | High; Average |
Send your message to us
High Quality Double Sided EVA Foam Tape DSE-15YM.
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- USD3000 roll
- Supply Capability:
- 30days for 1x20' FCL roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
