FRP Tanks for Water Treatment with Great Quality/FRP Soft Water Tank On Hot Sales /Fiber Glass Reinforced Plastic Vessels DN7000
- Ref Price:
-
$20.00 - 2,000.00
/ set
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction
In the FRP .with high tensile strength, the fiberglass plays the role of reinforcement whiles the wear-resistance and pressure –resistance synthetic resin is used for bonding the fiber as the basic materials. Putting together, they commonly play the role of being in finished form and load carrier.
Feature
The wall structure of the FRP pipe is normally consisting of two parts:
Structure layer: make the continuous glass fiber woven of which is cross winded according to the design angle as the reinforcing frame. Make the synthetic resin as the bonding basic materials. Among them, the weight of fiberglass occupied about 65-70% weight of resin about 30-35%. In order to strengthen the structural stiffness, the resin and silicon sand paste could be added in the middle layer of fiberglass filament winding layer.
Specification
u 2.5” Precision injected threads opening available in 8”~16” diameter tanks
u 4” precision injected threads opening available in 18”~36” diameter tanks
u 6” Flange opening available in 42”~80” diameter tanks
u 8”~18” diameter tanks available top opening only
u 21”~80” diameter tanks available top and bottom opening
u Tripod bases available in sizes of 21”~80” diameter tanks
u Optional side opening is available
Materials
u The liner layer is PE (polyethylene) materials for 8”~36” diameter tanks
u The liner layer is FRP (fiber reinforced plastic) for 42”~80” diameter tanks
Working condition
u Operating pressure: 0.6Mpa (100psi)
u Bursting Pressure: 1.8Mpa (300psi)
u Testing pressure: 0.9Mpa (150psi)
u Working temperature: below 50 centigrade
Application
Pre RO, Ion Exchange, Water softener, water filtration, House hold water filtration, Food and beverage, water storage
Opening
u 2.5”~4” UN threads ABS opening;
u 6” Flange FRP;
u other customized manway and side flange
Advantage
u Good corrosion resistance
u High mechanical strength at low specific gravity
u Good resistance to weathering
u Light weight
u Good insulating qualities
u Provide less maintenance & repairs down time
u Easy installation
FAQ
1. Do You Arrange Shipment For The Machines?
Yes, dear esteemed customers, for FOB or CIF price, we will arrange shipment for you. For EXW price, clients need to arrange shipment by themselves or their agents.
2. What's the guarantee, in case the water tank breaks down?
The water tank has one year s guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client s feedback. Parts will be replaced for free if the problems are caused by quality fault.
3. How about the documents after shipment?
After shipment, we ll send all original documents to you by DHL, including Packing List.Commercial Invoice, B/L, and other certificates as required by clients.
PRODUCTION
FACTORY
PACAKGE
- Q:Finished acceptance of FRP tank
- To ensure the excellent quality of glass steel tank, must strictly enforce the quality inspection measures, Guangzhou Jing Hui glass steel Co., annual production of glass steel tank each procedure is subject to strict selection, real-time production monitoring after strict acceptance screening, the factory to ensure the quality of each product meets the provisions of the relevant departments.
- Q:In order to compare the fast inspection, the FRP storage tank is leaking
- The glass steel tank is designed according to the conditions of hydrochloric acid can be used in the custom, only the design conditions of concentration of hydrochloric acid range, beyond the scope of use, will have a certain impact on the body, so are generally not recommended beyond the scope of use, such as other uses, recommended to buy custom. In the use of hydrochloric acid tank, there may be leakage events, today Xiao Bian will bring you hydrochloric acid tank leak emergency plan:Leak of hydrochloric acid tank:1. lighter conditions, a small amount of leakage, leaching, leakage or drip, tank corrosion;2. heavier cases, more leakage, linear fluid, linear corrosion of tanks;3. serious situation, a large number of leakage, the tank rupture.
- Q:20 cubic meter FRP double deck tank price
- But now, the production of this kind of glass double deck oil storage tank rarely, we oil in a short listed, called what type 3DFF, but listen to brother units say, construction is very quick, very convenient.
- Q:How can the 800*1200 stainless steel tank be protected from corrosion?
- Before construction, in order to ensure the effect of corrosion protection, we have to do another step, that is, to remove stainless steel tank surface rust, oil quality, old paint film, and so on, and some will affect the quality of construction debris.After all this is taken care of, we can really paint. But we must pay attention to, at room temperature, we have to paint every 4 hours to ensure the effect and quality of paint.
- Q:How much is a 20 cubic meter of steel storage tank?
- It depends on your FRP storage tank is used to put what medium, where to put, thickness requirements and so on a series of problems.
- Q:What kind of material can be used to store the dilute hydrochloric acid containing toluene?
- Liquid alkali storage tank commonly used glass steel produced. But also according to different concentrations to determine.
- Q:What kind of resin is used to make FRP tanks containing nitric acid?
- Nitric acid is a strong oxidizing and corrosive strong acid. Chemical formula: HNO3. Melting point: -42 DEG C, boiling point: 78 DEG C, soluble in water, pure nitric acid at room temperature, colorless and transparent.
- Q:Glass steel anti-corrosion tank glass steel coating thickness to detect initiation
- Both ultrasonic and infrared detectors are available. In fact, the atmospheric tank wall thickness is not much need to deliberately detection, as long as you can stand, do not feel very easy to deform it. Other things, such as tank wall thickness, should be noted.
- Q:How is the head made of glass fiber reinforced plastic storage tank made?
- Process: the head is made by vacuum introduction and pneumatic demoulding process.
- Q:Glass toughened septic tank can out of plastic pipe. How do you fix it?
- Enter the glass steel tank maintenance, should close all the inlet valve, emptying and cleaning tank, after testing confirmed that no toxic gas tank, not to enter into the oxygen tank, the tank should wear soft soled shoes, tied the safety belt and the safety belt on the other end attached to the tank top, tank ventilation attention. Into the tank operation, there must be personnel outside the tank monitoring
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
FRP Tanks for Water Treatment with Great Quality/FRP Soft Water Tank On Hot Sales /Fiber Glass Reinforced Plastic Vessels DN7000
- Ref Price:
-
$20.00 - 2,000.00
/ set
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
