FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment DN4000
- Ref Price:
-
$20.00 - 2,000.00
/ set
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment
In the FRP .with high tensile strength, the fiberglass plays the role of reinforcement whiles the wear-resistance and pressure –resistance synthetic resin is used for bonding the fiber as the basic materials. Putting together, they commonly play the role of being in finished form and load carrier.
Feature of FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment
The wall structure of the FRP pipe is normally consisting of two parts:
Structure layer: make the continuous glass fiber woven of which is cross winded according to the design angle as the reinforcing frame. Make the synthetic resin as the bonding basic materials. Among them, the weight of fiberglass occupied about 65-70% weight of resin about 30-35%. In order to strengthen the structural stiffness, the resin and silicon sand paste could be added in the middle layer of fiberglass filament winding layer.
Specification of FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment
u 2.5” Precision injected threads opening available in 8”~16” diameter tanks
u 4” precision injected threads opening available in 18”~36” diameter tanks
u 6” Flange opening available in 42”~80” diameter tanks
u 8”~18” diameter tanks available top opening only
u 21”~80” diameter tanks available top and bottom opening
u Tripod bases available in sizes of 21”~80” diameter tanks
u Optional side opening is available
Materials
u The liner layer is PE (polyethylene) materials for 8”~36” diameter tanks
u The liner layer is FRP (fiber reinforced plastic) for 42”~80” diameter tanks
Working condition
u Operating pressure: 0.6Mpa (100psi)
u Bursting Pressure: 1.8Mpa (300psi)
u Testing pressure: 0.9Mpa (150psi)
u Working temperature: below 50 centigrade
Application
Pre RO, Ion Exchange, Water softener, water filtration, House hold water filtration, Food and beverage, water storage
Opening
u 2.5”~4” UN threads ABS opening;
u 6” Flange FRP;
u other customized manway and side flange
Advantage
u Good corrosion resistance
u High mechanical strength at low specific gravity
u Good resistance to weathering
u Light weight
u Good insulating qualities
u Provide less maintenance & repairs down time
u Easy installation
FAQ
1. How is the package?
Solid Seaworthy plywood Box Package with Steel Belt. Save space as much as possible for container loading
2. What's the guarantee, in case the water tank breaks down?
The water tank has one year s guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client s feedback. Parts will be replaced for free if the problems are caused by quality fault.
3. How about the documents after shipment?
After shipment, we ll send all original documents to you by DHL, including Packing List.Commercial Invoice, B/L, and other certificates as required by clients.
PRODUCTION
FACTORY
PACAKGE
- Q:How much water glass grit filter tank with import pressure?
- Glass fiber reinforced plastic products can not withstand too much pressure, the material determines, but do not generally pressure requirements are high, is no problem. As you say, a sand filter can be fine.
- Q:What are the technical standards for FRP tanks?
- The head of a vertical storage tank can be ellipsoid, flat and conical, and the upper and lower heads can be assembled in different forms. The head of the horizontal tank is elliptical.
- Q:FRP tank what is impermeable layer?
- As a part of the tank wall, part from the function, lining layer, structure layer and the surface layer, the inner layer function is to solve the corrosion and leakage prevention role.
- Q:What material for liquid storage tank
- Liquid alkali storage tank commonly used glass steel produced. But also according to different concentrations to determine.
- Q:Dongfeng scenery 330 glass washing liquid tank
- Corrosion resistance, by using different types of resin, resistance of various acid, alkali and salt and a variety of oils and solvents, can be widely applied to various aspects of chemical corrosion, can replace stainless steel, non-ferrous metals and other materials
- Q:What kind of material can be used to store the dilute hydrochloric acid containing toluene?
- Liquid tank liquid alkali storage tank according to the types of polyethylene material storage tank, steel lined with polyethylene material tank two series. Polyethylene material series are vertical, horizontal tanks, transport tanks and other varieties, specifications of 0.6-50 cubic meters. The steel lined polyethylene storage tanks are vertical, horizontal, non-standard, special-shaped tanks, transport tanks, reaction cans and other varieties, specifications of 1-150 cubic meters.
- Q:Can formaldehyde be used in FRP tanks?
- After investigation, vinyl, furan, phenolic and epoxy FRP are resistant to formaldehyde, the temperature is less than 60 degrees.
- Q:Glass steel anti-corrosion tank glass steel coating thickness to detect initiation
- Both ultrasonic and infrared detectors are available. In fact, the atmospheric tank wall thickness is not much need to deliberately detection, as long as you can stand, do not feel very easy to deform it. Other things, such as tank wall thickness, should be noted.
- Q:Why leakage occurs during the use of FRP tanks?
- In general, there may be two possibilities, namely, bad production and nonstandard use
- Q:Does anyone know the wall thickness of 10m3 FRP tanks?
- 1m3's no more than 10MM, and others I'd like to know.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
FRP Tanks for Water Treatment/FRP Soft Water Tank /Fiber Glass Reinforced Plastic Vessels for Water Treatment DN4000
- Ref Price:
-
$20.00 - 2,000.00
/ set
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
