FRP tanks and vessels Low thermal and electrical conductivity
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 4000 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
INSTRUCTION
FRP tanks and vessels can be largely used in many areas of the light industry, petroleum, chemical, food brewing, transportation and so on. Such product can resist the corrosion of various acids, alkalis and salts.
CHARACTERISTICS
• High mechanical strength
• High mechanical inertness
• Resistance to weathering
• Low thermal and electrical conductivity
DESIGN PHILOSOPHY
The correct structuring of any kind of G.R.P. tank consist of three distinct types of layers:
• Chemical Resistant Layer
• Mechanically Resistant Layer
• Outer Protective Layer
CHEMICAL RESISTANCE
Resistance to corrosion in aggressive environments is one of
the primary reasons for specifying GRP tanks. These, resists a
wide range of chemicals and temperatures and can be built to
provide additional abrasion, weathering and fire resistance. The
chemical resistance of GRP tank depends primarily on the resin/
glass matrix used. Other factors can affect laminate resistance
including liner construction, cure, and fabrication methodology
and installation techniques.
General corrosion, galvanic, aerobic, pitting, dezincification,
graphitic and intergranular corrosion harm metals but not GRP.
PRODUCTION RANGE
FRP small-scale storage tank: Diameter ≤ 4M
Large-scale jobsite winding vertical storage tank: Diameter 4200mm-25000mm
EXECUTIVE STANDARD
FRP small-scale storage tank
JC/T587-1995 (Glass fiber reinforced plastic storage tank)
Large-scale storage tank
HG/T3983-2007 Industry standards of Chemical Corrosion-resistant jobsite Winding FRP Large-scale storage tank
HG/T20696 Design Requirements of FRP Chemical Equipment
COMPANY INTRODUCTION
CNBM, China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china building materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies
.
CNBM International Corporation is one subsidiary of CNBM, we focus on offering good-quality products, professional service and complete solution to our customers. Strong delivery capacity, advanced technology
& management, strong financing capability and excellent after-sale service are our advantages in sharing international market.
PICTURE S
- Q:What's the heat resistance of FRP tanks?
- And you choose materials, and some materials are high temperature, and some are at room temperature oh.
- Q:What type of resin is used in FRP tanks for electroplating waste water?
- At present commonly used are: latitude 901, Jinling DSM A430, Chang MF - 1 vinyl resin or epoxy resin.
- Q:I am made of FRP equipment. Who needs FRP tanks?
- I am specializing in the manufacture of stainless steel pressure vessels, reactors, and may also be part of the project equipment to use glass fiber reinforced plastic equipment.
- Q:What kind of material can be used to store the dilute hydrochloric acid containing toluene?
- Liquid alkali storage tank commonly used glass steel produced. But also according to different concentrations to determine.
- Q:Glass fiber (resin) storage tank for hydrochloric acid, how many years of service, please list the basis, thank you!
- This is a professional although I do have to ask this but according to experts and geographical conditions the hydrochloric acid storage tank as short as 1 older two years is certainly a problem but are small problems such as what Water Leakage care 5-8 years should be no problem if you want to buy what you can ask the tank manufacturers such as purchasing
- Q:Carbon steel horizontal diesel oil storage tank is made of glass fiber reinforced plastic. What kind of epoxy resin does the teacher use? Thank you
- The whole roll lining PE layer is formed at one time without seams, and the PE layer is firmly bonded with the steel body, without delamination, corrosion resistance and long service life. It is an ideal replacement for enamel, stainless steel, titanium container, aluminum container, plexiglass and plastic welding plate.
- Q:To make a high quality FRP tank, is the hardware construction important to the quality?
- They are not lying are winding process, but the drum mold and the coil made out of the tank quality difference of several grades, or why only the strength of the manufacturers will be on the drum mold, because the drum made lining is the no formation of the uniform wall thickness of gas bubble, with pneumatic demoulding demoulding no damage to the lining, the lining is the most intact Guan Jian lock and barrier factors all corrosive substances to penetrate the layer structure.
- Q:What's the process of making a glue paste woven bag into a storage tank? How about the strength?
- It does look like glue paste bags, in fact it is glass steel, do not believe you.
- Q:What is the use of FRP tanks?
- FRP tanks are applied in 2 aspects: storage of domestic water and storage of industrial products.
- Q:How to determine the quality of FRP?
- GRP tank is glass steel tank production process, the use of domestic production convenient, high technical requirements, the entire glass steel tank production process are the most primitive artificial manual techniques, so the production of technical personnel do not need too much, but the glass steel tank product produced is also a lot of disadvantages. In addition to beauty is greatly reduced, the glass steel tank is particularly deadly leakage problem, because in the process of hand lay in the glass steel tank, artificial operation technology is not high it is easy to have a bubble, the bubble will burst and leakage after the aging tank appear large range long time, service life is low, generally 5 around the year.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
FRP tanks and vessels Low thermal and electrical conductivity
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 4000 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords