FRP Pipe Glass Fiber Reinforced Polymer Pipe Production Line
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 pc
- Supply Capability:
- 60000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
PRODUCT DESCRIPTION
FRP fitting, a wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available.
Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface.
CHARACTERISTICS
• Corrosion resistance High mechanical property
• Low friction coefficient
• Light weight
• Non toxic
• Maintenance free
• Long life span
• Double O ring sealing joint make the pressurization more convenient and unique.
• Convenient and quick installation
• Long life of more than 50 years
TECHNICAL DATA
Stiffness | SN3750 | SN5000 | SN10000 | ||||||
Pressure | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 |
400 | 6.1 | 6.1 | 5.9 | 6.7 | 6.7 | 6.4 | 8.1 | 8.1 | 7.87 |
500 | 7.2 | 7.2 | 7.1 | 8 | 8 | 7.7 | 11.4 | 9.6 | 9.4 |
600 | 8.7 | 8.3 | 8.3 | 9.6 | 9.6 | 9.2 | 12.1 | 11.7 | 11 |
700 | 9.7 | 9.7 | 9.4 | 11.2 | 11.2 | 10.4 | 13.8 | 13.2 | 12.5 |
800 | 11.6 | 11.3 | 10.6 | 12.8 | 12.5 | 11.7 | 15.5 | 15 | 14.2 |
900 | 13.4 | 12.5 | 11.7 | 14.8 | 13.8 | 12.9 | 19.3 | 16.4 | 15.8 |
1000 | 14.6 | 13.7 | 13 | 16.2 | 15.1 | 14.4 | 20.7 | 18 | 17.3 |
1100 | 16.1 | 14.9 | 14.2 | 17.9 | 16.5 | 15.6 | 23 | 19.8 | 18.9 |
1200 | 17.2 | 16.1 | 15.4 | 19.6 | 17.9 | 16.9 | 24.7 | 21.5 | 20.6 |
1400 | 20.4 | 18.4 | 17.7 | 22.7 | 20.5 | 19.5 | 29.2 | 24.8 | 23.8 |
1500 | 22 | 19.9 | 18.7 | 24.4 | 22.1 | 20.7 | 31.4 | 26.3 | 25.3 |
1600 | 23.6 | 21.2 | 20 | 26.2 | 23.4 | 22 | 33.7 | 28.2 | 26.9 |
1800 | 26.3 | 23.5 | 22.4 | 29.2 | 26.1 | 24.7 | 36.4 | 31.6 | 30.3 |
2000 | 27.4 | 25.4 | 23.4 | 35 | 32.4 | 29.6 | 44.7 | 37.3 | 36.1 |
2200 | 29.7 | 27.6 | 25.3 | 37.8 | 35.3 | 32.6 | 48.7 | 41.5 | 40.4 |
2400 | 32.6 | 30.3 | 28.4 | 41.8 | 38.8 | 34.6 | 53.4 | 44.6 | 42.8 |
2600 | 36.3 | 33.5 | 31.5 | 45.2 | 40.5 | 35.4 | 55.8 | 47.2 | 45.6 |
2800 | 39.6 | 36.0 | 34 | 49.4 | 45.1 | 42 | 62 | 53 | 51 |
3000 | 41.0 | 38.1 | 36.2 | 52 | 47 | 45.3 | 67 | 58.2 | 54 |
PICTURES
- Q:Do I need CCC certification for ventilated GRP?
- Usually fiberglass, air conditioning, ventilation pipes will have insulation requirements, the general need not heat preservation.
- Q:What's the price of fiberglass reinforced sand pipes?
- Specifications: DN100--DN4000 are available.Thickness: 5mm--20mm, bothQ:28O5--9I343I/ I86+O38I+2OO7
- Q:What are the main points for the installation of FRP ducts?
- Underground parking, commercial and residential buildings, shopping malls, civil air defense projects, office buildings and so on
- Q:How long is the service life of glass fiber reinforced plastic pipes?
- Hebei, Qingdao and Beijing have additional production bases and service liaison points. Willing to work with new and old customers to create a beautiful today, Chinese and foreign. The company with integrity development guide thought, company value go production, learning and research Jimo road. The wide customers and cooperation of different geographical identity peer praise richly endowed by nature is a unique, Wuhua Tianbao, day people for the auspicious clouds. The sludge produced by the glass fiber reinforced concrete grille has good sedimentation, which is beneficial to the removal of the suspended substance in the back section. The glass fiber reinforced concrete grille has strong adaptability, can adapt to different water quality range, and has strong endurance to the shock load of water quality and water quantity sudden change. FRP grating treatment efficiency is higher than activated sludge process. The galvanized grating plate has the advantages of advanced structural design, optimum matching of gas and water, and sufficient heat exchange, with the same level in foreign countries and superior output. Galvanized grille plate steel bracket adopts zinc plating treatment, double paint anti-corrosion or electrostatic powder spraying, corrosion resistance is strong, service life over similar products double. The two-way grille ensures the natural delamination of the medium and the impurity, and at the same time, the discharge method is arranged at the bottom of the tank, so that the cleaning is particularly convenient
- Q:How to repair and repair the broken hole of GRE glass fiber reinforced plastic pipe?
- 1, clean up the broken hole around, clean; 2, find a piece of iron or glass steel film, slightly larger than the broken hole;
- Q:Glass fiber reinforced plastic sand pipe backfill 5m, how much kg pressure?
- In general, glass steel pressure refers to the internal pressure, the conveying pressure of water, and you said the backfill produces is the external pressure, often say that the stiffness parameter.
- Q:What's the difference between glass fiber reinforced plastic pipe and glass fiber reinforced sand pipe? What kind of material is good?
- Sand tube is more brittle, gfrpmp is relative to the glass tube can be called pure glass tube, glass tube is not with quartz sand, the two pipes generally used in different areas, the pure glass pipe can be used in most areas, but the sand tube is generally only used in the political field, especially is the large diameter sand tube.
- Q:FRP duct material plan is how to mention?
- Multi plan square, but also according to the combination of site and construction drawings, to see how much
- Q:Uneven settlement of the foundation, can lead to glass fiber reinforced plastic underground water pipes burst, what is the principle?
- Dislocation will cause the pipe to burst. The pressure is different, and the pipe will burst
- Q:Are FRP pipes still developing?
- Although high-end composites have all sorts of benefits, glass tubes can replace traditional plumbing materials, at least far away.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
FRP Pipe Glass Fiber Reinforced Polymer Pipe Production Line
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 pc
- Supply Capability:
- 60000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords