Flexible Graphite Sheet(Paper)
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Main specifications:thickness:0.2-0.7mm;width:5-100mm;length:25-50m.
Pure Graphite Sheet/flexible graphite sheet/Graphite sheet in roll
Main specifications: thickness: 0.12-5mm;width: 0.5-1.5m
Graphite sheet: The flexible graphite cut into the shape of belt which can be used to make graphite sealing components or graphite woven packing, etc
Graphite crape sheet: The graphite sheet is rolled in the sealing of thread and flange
Graphite back tape: The graphite sheet is made with the taping, after the ribbon cutting. Mainly it is used for thread and flange sealing.
Graphite gum wrinkle zones; The graphite sheet with the tape rolling after paste of corrugated ribbon cutting. Mainly it is used for thread and flange sealing.
Main specification: Thickness: 0.2-0.7 mm; Width : 5-100 mm; Length; 25-50 m
Pure Graphite sheet (paper)
Items | Unit | Speciality value | Remarks | |
Temperature scope | °C | 200-3300 | in non-oxidizing atmosphere | |
Oxidation temperature | °C | 450 | Atmosphere for 24 hours lgnition loss 1% | |
Tensile strength | Mpa | 4.0 | 1910N Burthen | |
Compressibility | % | 35-50 | 1910N Burthen | |
Recovery | % | 12 | 1910N Burthen | |
Heat exchange | KCal/m.hr | 120 | ||
40 | ||||
Resistance | uΩ.cm°C | 900 | ||
250000 | ||||
Heat expansion factor | 10-6/°C | 5 | ||
10-4/°C | 2 | |||
Lgnition loss | % | 450°C | ≤1 | |
600°C | ≤20 |
- Q:The graphite wrapping gasket prevents the film from being installed. Is it a thin one?
- Graphite gasket made of pure graphite or metal plate (tooth plate, plate, net) reinforced graphite plate cutting or stamping, has many excellent sealing performance, such as thermal stability, self lubrication, corrosion resistance, not aging, not fragile, the use of long-term stability in the harsh working conditions, rarely need maintenance.
- Q:Many of the performance of vanadium battery better than lead-acid batteries, but what are its disadvantages?
- The super capacitor is a battery made by the principle of physics, and the two battery is mostly a chemical battery made by chemical principle. So the two are essentially two different things, one is physical charge transfer, and the other is chemical energy conversion into electrical energy.
- Q:How is the graphite plate machined?
- Graphite board has good characteristics such as good conductivity, high temperature resistance, acid resistance, alkali corrosion and easy processing. Therefore, it has been widely used in metallurgy, chemical industry, electrochemistry and other industries
- Q:What is the difference between the wave tooth compound gasket and the graphite gasket?
- Special conditions such as extremely high temperature, strong corrosion and so on require special materials metal wave gear composite gasket, we can also produce some of the following special material requirements:321316TI, 309347410, 304L stainless steel, dual phase steel, Monel (220531803) MONEL (400), INCONEL (600625), nickel indium, INCOLOY (800825), Hastelloy HASTELLO (B2, C276), titanium (T2) and other special stainless steel or alloy materials.Graphite gasket made of pure graphite or metal plate (tooth plate, plate, net) reinforced graphite plate cutting or stamping, has many excellent sealing performance, such as thermal stability, self lubrication, corrosion resistance, not aging, not fragile, the use of long-term stability in the harsh working conditions, rarely need maintenance. The lining materials are made of different metal sheets. The type is optional, without hemming, inner wrapping, outer wrapping, inner and outer wrapping. Graphite cut gasket is from pure graphite plate drilling or cutting and it has good corrosion resistance, high / low temperature, compression elasticity and high strength good, complex geometric gasket circular is widely used in all kinds of pipes, valves, pumps, pressure vessels, heat exchanger, and condenser generator, air compressor, exhaust pipe, refrigerator etc..Graphite gasket is mainly used in various industrial pipe flanges, heat exchangers, valves, etc., and liquid level gauge, special flange on the level.Graphite gasket to stone line as the material, by weaving and shaping. Graphite gasket suitable for high temperature, high pressure, strong corrosive medium work all kinds of valves, pumps, reactors and other equipment packing box sealed.
- Q:Why can graphite be used to power the appliance?
- The bomb is used after special treatment of graphite carbon material, each carbon filament diameter is very small, only a few thousand of CM, therefore, can be in the high altitude long time floating. Because of its after grinding fluid energy is made, and after chemical cleaning, thus greatly improve the conductivity of the carbon filament. Carbon filament is not sticky, but can be attached to any surface. It is detonated by explosions or gunpowder, scattered in enemy positions, and destroyed enemy air defenses and power generation equipment. Carbon filament into electronic devices, internal cooling pipes and control system of the black box. Its warheads are destructive to stop on the runway including aircraft, electronic equipment, power plant power grid and all.
- Q:Why does graphite conduct resistance?
- First of all, in addition to superconductors, any conductor has a resistance, and then the graphite resistance is based on the anisotropy of graphite and different, and then the degree of graphitization also determines the size of the graphite resistor.
- Q:Do you have a lot of plates with silica ink?
- Silicon carbide (SiC) is made from quartz sand, petroleum coke (or coal tar), sawdust (green salt produced when adding green silicon carbide) and other raw materials by smelting with resistance furnace at high temperature. Silicon carbide also rare minerals in nature, Mo sangshi. Silicon carbide, also known as carbon silica. Silicon carbide is the most widely used and the most economical kind of refractory materials in C, N, B and other non oxide refractory materials. It can be called "carborundum sand" or "refractory sand". At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide two, are six square crystal, the proportion of 3.20 to 3.25, the microhardness is 2840 ~ 3320kg/mm2.
- Q:How to identify graphite impregnated PTFE and ordinary graphite?
- Graphite impregnated with PTFE should not react with it
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Flexible Graphite Sheet(Paper)
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords