Flexible Graphite Composite Plate
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 200 Kilograms kg
- Supply Capability:
- 2000 Kilograms per Week kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
1.material:graphite
2.C content:>99%
3.Certificate:GB/T19001-ISO9001-2008
REINFORCED BY METAL EXPANDED GRAPHITE SHEET
SERIAL NO.
.Graphite sheet with perforated\flat SS316 inserted
. Graphite sheet with perforated\flat SS304 inserted
. Graphite sheet with perforated\flat ordi-nary carbon steel inserted
STANDARDS:
.Ply: 1~3.5mm
.Breadth:1×1m 1.5×1.5m
PROPERTY:
.Insert to virtually all chemicals except strong oxidizers.
.Excellent thermostability,sealing proper-ties unchanged after working for along per-riod under a temperature 200°C~1000°C.
.High percentage of compression and resilience,low slackness of thermal stress ,fine compensating ability for the roughness of the sealed surfaced long working life.
USAGE:
.For making cylinder gaskets of compressors ,inthernal-combustion engines.
Reinforced Inserted Material |
N/mm2Din52913 Stability Compresssive stress |
Temperature |
ASEMF-36A-66 COM-pressibility |
ASEMF-36A-66 Recovery |
cm2/min Dn3535 GAS | |
In oxidizing Media |
In Nonoxidizing Media | |||||
Tanged Carbon Sheet (Tickness 0.20-0.25mm) |
≥48 |
-10-450 |
-10-550 |
30-35 |
15-20 |
≤0.08 |
Ss304,316 Tangled Stainless steel sheet(Tickness 0.1mm) |
≥48 |
-240-450 |
-200-560(Ss304) -200-870(Ss316) |
30-40 |
15-30 |
≤0.8 |
Ss304,316 Stainless steel flat sheet (Tickness 0.1mm) |
≥45 |
-240-450 |
-200-560(Ss304) -200-870(Ss316) |
40-50 |
10-15 |
≤0.4 |
Ss304,3016 Stainless steel mesh |
≥40 |
-240-450 |
-200-560(Ss304) -200-870(Ss316) |
30-35 |
15-20 |
≤1.0 |
Mylar Reinforced (Tickness 0.05mm) |
≥40 |
-200-450 |
-200-1650 |
40-50 |
10-15 |
≤0.4 |
- Q:The graphite wrapping gasket prevents the film from being installed. Is it a thin one?
- Graphite gasket made of pure graphite or metal plate (tooth plate, plate, net) reinforced graphite plate cutting or stamping, has many excellent sealing performance, such as thermal stability, self lubrication, corrosion resistance, not aging, not fragile, the use of long-term stability in the harsh working conditions, rarely need maintenance.
- Q:Many of the performance of vanadium battery better than lead-acid batteries, but what are its disadvantages?
- There are two main technical problems, the existence of the first vanadium vanadium battery, battery anode in liquid pentavalent vanadium in static or temperature higher than 45 degrees Celsius conditions to the precipitation of five of two vanadium precipitation, the precipitation plug flow, coated carbon fiber, the deterioration of stack performance, until the stack is discarded, and power in a long time during the operation of reactor temperature of electrolyte can easily exceed 45 degrees celsius. Second, the graphite plate to be positive liquid etching, if the user properly operated, the graphite plate can use two years, if the user improperly, a charge can let the graphite plate completely etching, stack can only be scrapped. In normal use, every two months should be maintained by professionals, this high frequency maintenance costly and laborious.
- Q:How is the graphite plate machined?
- Graphite board has good characteristics such as good conductivity, high temperature resistance, acid resistance, alkali corrosion and easy processing. Therefore, it has been widely used in metallurgy, chemical industry, electrochemistry and other industries
- Q:What is the difference between the wave tooth compound gasket and the graphite gasket?
- Gaskets is a metal gasket, usually with precision lathe or milling machine into a waveform shaped trench concentric in two face machining flat metal gasket, the upper and lower sides of the tooth tip staggered, the compression spring has better performance, and the other is due to the sealing surface contact several concentric circles line contact, therefore has the labyrinth seal, according to medium and different working conditions, can choose flexible graphite, PTFE, non asbestos or some other soft metal, pasted on the two surface of the gasket, the soft cover seal and the advantages of the strength of the metal, good elasticity, in order to achieve a better sealing effect in most cases, we recommend graphite as a sealing layer, when the medium to produce graphite reaction or clean environment requirements when we suggest that the selection of the newly launched expanded PTFE excellent performance for paste Layer, metal wave tooth composite gasket generally does not need a lot of pressing force, you can achieve the sealing effect.
- Q:Why can graphite be used to power the appliance?
- The bomb is used after special treatment of graphite carbon material, each carbon filament diameter is very small, only a few thousand of CM, therefore, can be in the high altitude long time floating. Because of its after grinding fluid energy is made, and after chemical cleaning, thus greatly improve the conductivity of the carbon filament. Carbon filament is not sticky, but can be attached to any surface. It is detonated by explosions or gunpowder, scattered in enemy positions, and destroyed enemy air defenses and power generation equipment. Carbon filament into electronic devices, internal cooling pipes and control system of the black box. Its warheads are destructive to stop on the runway including aircraft, electronic equipment, power plant power grid and all.
- Q:Why does graphite conduct resistance?
- Resistors are available, some are large, others are smallOf course, in addition to superconductivity
- Q:Do you have a lot of plates with silica ink?
- Silicon carbide (SiC) is made from quartz sand, petroleum coke (or coal tar), sawdust (green salt produced when adding green silicon carbide) and other raw materials by smelting with resistance furnace at high temperature. Silicon carbide also rare minerals in nature, Mo sangshi. Silicon carbide, also known as carbon silica. Silicon carbide is the most widely used and the most economical kind of refractory materials in C, N, B and other non oxide refractory materials. It can be called "carborundum sand" or "refractory sand". At present, China's industrial production of silicon carbide is divided into black silicon carbide and green silicon carbide two, are six square crystal, the proportion of 3.20 to 3.25, the microhardness is 2840 ~ 3320kg/mm2.
- Q:How to identify graphite impregnated PTFE and ordinary graphite?
- Carbon can be oxidized by concentrated nitric acid to form nitrogen dioxide and carbon dioxide
1. Manufacturer Overview |
|
---|---|
Location | Shandong,China (Mainland) |
Year Established | 2008 |
Annual Output Value | |
Main Markets | North America South America Eastern Europe Southeast Asia Africa Eastern Asia Western Europe Southern Europe |
Company Certifications | GB/T 19001-2008//ISO 9001:2008 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | 41% - 50% |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | 10,000-30,000 square meters |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Flexible Graphite Composite Plate
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 200 Kilograms kg
- Supply Capability:
- 2000 Kilograms per Week kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches