Excavator - HT SERIES - HT135 Crawler Excavator
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Crawler Excavator HT135 | |
Engine type: | R6105ZG13 |
Rated power/speed: | 100kw/2200r/min |
Steering width: | 2405mm |
Tail turning radius: | 2600mm |
Gage: | 2010mm |
Min ground clearance: | 400mm |
Hydraulic system pressure: | 31.5Mpa |
Bucket capacity: | 0.6m3 |
Reverse speed: | 11r/min |
Gradeability: | ≥ 40% |
Maximum excavating force | :90KN |
Maximum excavating distance: | 7600mm |
Maximum excavating depth: | 4398mm |
Maximum excavating height: | 7450mm |
Track link width: | 500mm |
Travel speed: | 3 -5km/h |
Excavators are used in many ways:
Digging of trenches, holes, foundations
Material handling
Brush cutting with hydraulic attachments
Forestry work
Forestry mulching
Demolition
General grading/landscaping
Mining, especially, but not only open-pit mining
River dredging
Driving piles, in conjunction with a pile driver
Drilling shafts for footings and rock blasting, by use of an auger or
Hydraulic drill attachment
Hydraulic excavator capabilities have expanded far beyond excavation tasks with buckets. With the advent of hydraulic-powered attachments such as a breaker, a grapple or an auger, the excavator is frequently used in many applications other than excavation. Many excavators feature a quick coupler for simplified attachment mounting, increasing the machine's utilization on the jobsite. Excavators are usually employed together with loaders and bulldozers. Most wheeled, compact and some medium-sized (11 to 18-tonne) excavators have a backfill (or dozer) blade. This is a horizontal bulldozer-like blade attached to the undercarriage and is used for levelling and pushing removed material back into a hole.
- Q:Such as : Lumber jack, Construction workers, heavy machine operators, machinist, pilot, foundry worker, sheet metal workers, folk lift, excavator, back hoe operators, semi-trailer driver etc...Or health damaging jobs such as welders and work in continental shifts. Most long distance truck drivers in night-shift are Men.Or most toxic environment in chemical industry, oil refinery, nuclear industry, radioactive waste disposal, explosive handler.Every accident in those industries will handicap men, or worst kill men.The rate of industrial accidents in men is more than 10 times that of women.If feminists complain about wage gap, why don't they push hard for women to do such jobs , whether they like it or not?The rate of payment depend on how dangerous the job / how damage it is to your health, as well.
- Two reasons: 1) Most women are simply unwilling to do dangerous work. 2) Men's lives are greatly devalued in current society. You can see this in occupational health, in health research, and in health spending. This value-of-life perspective used to be largely motivated by men's willingness to sacrifice for others. These days, a large share of it stems from the successful devaluation of men's lives by feminists. Note that while feminists, for example, make a big deal about the gap in average occupational wages (roughly 3:2, women less than men), they absolutely refuse to even admit, let alone discuss, the gap in occupational deaths (17:1. men MUCH more than women). Not surprisingly, MRAs object to this contempt for the lives of men. Mama: Your grasp of supply and demand is weak. Dangerous jobs ALWAYS pay more for equivalent skill-level because workers would refuse to do them otherwise. Workers, people, always consider such tradeoffs in their occupational decisions. To say that there is no relation between danger and wage is to be completely naiive about both current wage structures and about what supply and demand means. I am quite struck by the nobody has to do these jobs comments. Is that like, nobody has to raise the kids? or nobody has to give birth? or nobody has to cook and clean? If so, maybe men doing dangerous jobs should just go on a collective strike. Perhaps then we'll get a better understanding of what these people are doing for the rest of us.
- Q:Hai I am working into sales with excavator field ,i want start a small skill industrie pls guideme good bussi.
- Hello, Sounds good.... Just make a website for your business advertise through online. Good Luck......... with regards, Raom
- Q:Bench tested altinator,it's good,new batteries,new belts,checked fuses, still only 24.8 volts at the batteries.Should be around 28 volts with engine running. Display in opperators cab reads quot;charging problemquot;. Is there a relay I don't know about?
- yes yu may have an external regulator fitted , some times its under the seat , maye be elsewhere , might be near fuse box , should be bigger than a normal relay , will have alt written on it , probably black and plastic , yu can try and call dealer parts section and ask them if there's one on yur machine , yu will need serial number of coz , if its imported serial number wont be any good , is the charge indicator light on the control panel working , did yu check the fuses ?........ move them around in case there's a corroded connection , how many wires on back of alternator ?.......should be big red one , and at least one small one ( signal wire ) make sure this is ok , make sure wiring harness from engine to chassis is ok , yu might find wiring diagramm on internet , this will show external reg , are there any small wires connected to the big ht ( high tension ) wire on the battery ?.......is there an inline fuse fitted there ?? .....is corrosion a problem with any part of the harness ? dont be afraid to cut open the harness with a box cutter knife if yu think yu have a problem , its ok it wont bleed , just retape back together in a proffesional manner when checked out ,
- Q:Full hydraulic crawler excavator should not walk more than several thousand meters per hour.
- The walking speed is 5 km / h.Usually 6 kilometers per hour
- Q:Stumps, 3ft diameter rocks, plenty of large pines, etc. Cleared, leveled and made ready to turn into a yard... any idea? Heard somewhere around $8,000 an acre.... Any excavators or landscape construction or loggers/ landowners inputs would be appreciated.
- contact ur real estate agent
- Q:Thanks a lot.
- 'Bucket boom'. The 'cherry picker' is the basket the men stand in.
- Q:I was watching a documentary about pompeii and the eruption in 79 AD but i fell asleep before it ended. The last thing i remember seeing was what looked like rock covered people?how did this happen? im guessing it was due to the pyroclastic flow? but im not 100% sure.
- The okorder /
- Q:A bobcat, Excavator, or any other ones that would work best?
- Consider the location of where you are digging (lawn, gravel drive, empty lot). It is important to use equipment that can safely maneuver in the area you are digging (turf tires in lawn areas, heavy treaded tires for rougher terrain). Also, how deep are you digging? Bobcats work well in open areas, while excavtors will perform best in tight narrow holes and work environments. Hope this helps! -Josh
- Q:I have no clue at all whatsoever what the excavators are about at all.If someone could be kind enough to explain it as well as they can 5 yahoo whatever points is there's. Thanks and please help!!!
- use the hacker and go back to the spawn area and hacker on the pannels on the sides to prevent from running out of air in the BioDome and other hallways
- Q:Dragon excavator 150 price
- Disadvantages: large fuel consumption, short arm, resulting in some work can not be a molding, waste of time.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Excavator - HT SERIES - HT135 Crawler Excavator
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
