Electrical Tape 1011 For Industry
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 3000 rolls roll
- Supply Capability:
- 30 Days For 1x20' FCL roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information Of Electrical Tape 1011 For Industry:
Widely used in wire and cable insulation and bundling.
Backing: Soft PVC
Adhesive:Rubber based adhesive
Thickness: 110, 130, 150, 180, 200 micron and other thickness as customers require.
Color:Various colors such as Black, White, Red, Green, Blue & Yellow.
Electrical Tape 1011 For Industry composed of soft film and rubber based PSA iIs charaterized by excellent insulation,good flame retardant and excellew resistance to voltage and lowtemperature, it is used for insulation protection of electrical wires and harness in automobile industry.PET tape(polyester tape) composed of PET film and solvent based PSA is charaterized by good tensile strength and resistance to high temperature.It is used for various packing and wrapping of transformer coils
|
Packing Of Electrical Tape 1011 For Industry
Core I.D.: 3” (76mm±1)
Jumbo Roll:1280mmx 4000m
Cut Roll: As per customer’s requirements
Application Of Electrical Tape 1011 For Industry
Carton sealing & packing, Light duty packaging, bundling, holding, and other office & household use.
Service Of Electrical Tape 1011 For Industry
We have a group of professional technicians and workers with rich experience, who are dedicated in this industry and try to offer best service to every customer. We are undertaking the idea of “reliable quality, reasonable price, and good service” to meet the needs of every customer. Your success is our goal, and your content is our hope. We keep pursuing “exact production, high-quality service”.
Handing and Storage Of Electrical Tape 1011 For Industry
Handling procedures:Caution with edge of sheet. After using this sheet, wash hands.
Storage procedures:Keep dry and cool and away from direct sunlight for quality.
Stability and Reactivity Of Electrical Tape 1011 For Industry
Chemical Stability: Stable and non-reactivity
Conditions to Avoid: Away from high temperature
Incompatibility with various substances:specific materials/condition to avoid.
Hazardous Decomposition Products:Thermal decomposition will produce mainly C02,and slightly CO.
Hazardous Polymerization:Can not occur
Transport Information Of Electrical Tape 1011 For Industry
Not a hazardous material for DOT shipping.
UN:None
Packaging sign:According to the buyer
Packaging Category:No information found/According to the buyer.
Shipping Marks: According to the buyer
Remarks Of Electrical Tape 1011 For Industry
The data above are typical results and subject to change without notice.
Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
The products should be stored at room temperature and be kept away wet and/or heat source.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
- Q:What's the performance of PVC tape?
- Use: used for dressing, wire and cable 600V fixed, insulation protection, environmental temperature at 70 degrees Celsius, the following basic waterproof 900V electrical equipment insulation, electrical submersible pump wells, lead wire, insulated overhead line joint inner cladding waterproof insulation.
- Q:What specifications do you have for PVC electric tape?
- The first is the PVC of type 3. Compared with type 5, the production of type 3 PVC requires long reaction time and high polymerization temperature, and requires high added material. The production cost is 50-100 yuan / ton higher than that of type 5. 3 type PVC high purity, small fish eye, easy to blister, with high temperature resistance, insulation, soft products and other characteristics, mainly for the production of soft products, such as wire and cable, agricultural films, conveyor belts, plastic products for daily use.Again, the SG-7/SG-8 and SG-5 PVC. The three resins are basically the same process and the production unit is the same. The main difference lies in additives, formula, polymerization temperature, reaction pressure and so on.In terms of reaction temperature and reaction pressure. SG-8 resin has basically reached the limit pressure of polymerization reactor, reaction conditions more stringent requirements, the operation, safety, technology, personnel quality and other aspects of the requirements, and it is more difficult to control the quality of resin.
- Q:What is PVC double sided tape?
- [] double-sided tape is made of paper or cloth, plastic film substrate, then the elastomer pressure-sensitive adhesive or resin adhesive coating made in the substrate of the roll type adhesive tape is composed of base material, adhesive, release paper (film) or silicone oil paper is composed of three parts.
- Q:Toilet water pipe seam water seepage, with raw tape tight, can you?
- Note: the purpose of fighting waterproof guards is to make the water pipes inside the floor forming waterproof layer, so that water is not in the floor water seepage, so as to avoid other floor water seepage. The second is from upstairs. First check the water pipe and the ground seam is intact, whether there are cracks, cracks in the gap. If the gap is damaged, drying condition, put the loose broken filling materials clean, and then use the kitchen and toilet water spray over the ceramic tile aperture, 20 minutes after drying for the treasure of the joint damage to fill the gap tile.
- Q:How to set the polyethylene anticorrosive adhesive tape?
- 3. According to the winding construction method of adhesive tape, the width of anticorrosive adhesive tape is determined. Don't use the manual winding tape is too wide, the construction workers when the efforts are not easy to control, it is best not to exceed 150mm wide; manual mechanical winding (with some simple mechanical and visual), but the maximum width is 230mm; the mechanical winding tape width appropriate to relax, but preferably not more than 300mm.
- Q:PVC are the grades of electrical tape classified? How do you identify the grades?
- PVC electrical tape is graded, such as forever solid tape, Yongle tape are sub class A, B class, C class, this classification is to go by film, a film, B film, C film, and A-level, film classification is based on membrane composition,
- Q:Reasons for tape degumming
- Use glue improperly. PVC as the surface material, you can not use hot melt adhesive, the most coating glue
- Q:What's the quota for PE membrane isolation layer?
- Polyethylene film is a commonly used plastic film, because of its non-toxic, so a lot of food used for making packaging bags. Notice the difference between PVC and polyvinyl chloride (PVC). The simple way is to make the polyethylene film for ignition, and the non flammable is PVC film.A separation layer between a polyethylene film, a barrier layer, an intervening coil, and concrete or other protective layer. It is also considered a separate protective layer.
- Q:PVC electrical tape, and insulation tape difference
- Is actually about the same things, pVC is a polymer material, insulating many wires is PVC, the general said that with insulating tape yarn inside that, relatively speaking, PVC tape more resistant to high temperature, usually to 80 degrees.
- Q:What material is the base material of PVC electric tape?
- The base material is slightly foamed PVC plastic, and the pressure-sensitive adhesive is applied on the bonding surface, and the adhesive effect is achieved
1. Manufacturer Overview |
|
---|---|
Location | Shanghai, China |
Year Established | 2009 |
Annual Output Value | US$ 2 Million |
Main Markets | 20.00% North America 20.00% South America 10.00% Eastern Europe 10.00% Southeast Asia 10.00% Northern Europe 10.00% South Asia 10.00% Western Europe 5.00% Africa 5.00% Mid East |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shanghai, Port |
Export Percentage | 10% - 25% |
No.of Employees in Trade Department | 51-100 People |
Language Spoken: | English; Chinese; |
b)Factory Information | |
Factory Size: | Above 30,0000 sets |
No. of Production Lines | Above 3 |
Contract Manufacturing | OEM Service Offered |
Product Price Range | High; Average |
Send your message to us
Electrical Tape 1011 For Industry
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 3000 rolls roll
- Supply Capability:
- 30 Days For 1x20' FCL roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords