E Glass Woven Roving 600grs
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Product Brief Description
1. E glass woven rovings 600grs are bidirectional fabric made by direct rovings in plain weave pattern.
2. Compatible with unsaturated polyester,vinylresin ,epoxy resin.
3.Applicable for hand lay-up, winding and compress molding process,Suitable for manufacturing tank,boat,automobile parts and other FRP products.
1.Consistent thickness and excellent surface treatment.
2. Rapid impregnating and good compatibility with resin.
3. Uniform tension,high dimensional stability and making handing easy.
4. Good mechanical properties and high strength of parts.
Technical Specification
TEST ITEM | STANDARD | STANDARD VALUE | AVERAGE VALUE | RESULT | ||
AREA WEIGHT (G/M2) | ISO3374 | 600+/-5% | 602 | yes | ||
WIDTH (MM) | ISO5025 | 1000±20MM | 1000 | YES | ||
FABRICS COUNT (ENDS/10CM) | WARP | ISO4602 | 25±2 | 25 | yes | |
WEFT | ISO4602 | 25±2 | 24 | YES | ||
TENSILE STRENGTH(N/50CM) | WARP | ISO4606 | ≥4000 | 4015 | yes | |
WEFT | ISO4606 | ≥4000 | 4015 | YES | ||
moisture CONTENT (%) | ISO3344 | <=0.15 | 0.1 | yes | ||
WARP ROVING(TEX) | 1200 | 1200 | YES | |||
WEFT ROVING(tex) | 1200 | 1200 | YES | |||
LOSS ON IGNITION (%) | ISO1887 | 0.4-0.8 | 0.5 | yes | ||
FAQ
2.Storage:Optimum storage conditions are between the temperature of 5～35℃ and with the humidity between 35%～65%.The product should be used within 12 months from the time of delivery and remain in theiroriginal packaging until just prior to use.
- Q:The use of glass fiber cloth
- It used for insulating layer of building external wall. Glass fiber cloth is also used for glass fiber reinforced plastics industry. The main function is to increase its strength.
- Q:The difference between EPS and GRC, advantages and disadvantages, construction technology, key points, the scope of application.
- Fissure is easy to leak water in the cold temperature. Flat connector does not absorb water with a little amount of coating and short production cycle (about 7-12 days). GRC decorative elements is heavy. Due to its shorter installation, it does not require very specialized workers. There is no problem under the temperature of plus or minus 50 degrees Celsius. It has excellent waterproof performance. It has pore and is not easy to chap, but it is easy to deal with and carry with good toughness. If you want to refit it, you need to do some waterproofing work. The connector can absorb water and the material used for producing is belongs to stiffness material with less crack. Finished products features with lightweight, crisp, poor uniformity. High-level job is difficult to process without leakage. Cracking phenomenon is serious and can be cut. Hot bridge is different to control with protective layer features with weathering resistance. Its weight account for 10% of the traditional non light components. Large deformation period is slow. It can be bended moderately. It features with freezing and?thawing resistance and little deformation. It is easy to install and crack so that it needs to be trimmed. It is easy to be linear deformation.
- Q:The difference between glass fiber plain cloth and glass fiber woven roving.
- According to the weight and width, there are many models including 200 g, 400 g, 600 g and 800 g. The width of 900, 1000, 1270 and 1400 are commonly used. The width is from a few centimeters to 3 meters and the weight is from 60 to 800.
- Q:Introduction of inorganic glass fiber reinforced plastic air pipe
- Inorganic glass fiber reinforced plastic air pipe, according to the properties of the binding materials, can be divides into: Made of binding materials with glass fiber mesh cloth hydraulicity inorganic glass steel duct and made of cementitious materials and glass fiber mesh air hardening modified magnesium oxychloride cement duct with two types of modified magnesium oxychloride cement to the sulfate type. The pH value of the hardened material should be less than 8.8, and there is no alkalinity corrosion of the glass fiber. Inorganic glass steel duct should be used alkali-free, medium alkali or alkali resistant glass fiber mesh cloth, and are consistent with current national standard "glass fiber grid" JC561, "the alkali free glass fiber roving," JC/T281, "in the alkali glass fiber roving" JC/T576 regulations. The quality of magnesium oxychloride cement duct Magnesium Oxide should comply with the national standard "Magnesium Oxide" light burned magnesite products with WB/T1019-2002 regulations. Inorganic glass steel duct can divided into the overall common type (non insulation), integral insulation type (inner and outer surface of inorganic glass steel, middle insulating material) and combination type (by special adhesive, composite plate, flange, reinforcement angle etc) and the combination of insulation, its production parameters should comply with the provisions of the table 1, 2, 3. The longitudinal and transverse lap joint distance between adjacent layers of glass fiber grid cloth should be more than 300mm, and the distance of the same layer lap joint shall not be less than 500mm. Lap length should be greater than 50mm. The wind pipe surface thickness of the slurry flating glass fiber mesh cloth is appropriate. And the surface do not have dense pores and spillage.
- Q:What is glass fibre reinforced plastic? What do Glass fiber reinforced plastic used for?
- it is commonly known as glass fiber reinforced plastic: Also reduce plastic pollution of not being degradation. 1. 2: Not only can save energy consumption of metal. Glass fiber reinforced plastic products can be used as an alternative to the metal and plastic. It is an ideal material for glass fiber reinforced plastics, as its scientific name is glass fiber reinforced plastics.
- Q:how to produce glass?reinforced?plastics grating
- Production technology, there are mainly three konds of glass?reinforced?plastics grating production process: Peciprocating filament winding process, continuous filament winding process and casting process. Reciprocating filament winding process(belongs to fixed-length method): In this process, the leaching glue tank with rotating mandrel reciprocate and the long glass silk with a certain angle works as auxiliary. Auxiliary angel (the winding angle) is controlled by the moving speed of leaching glue tank and the speed ratio of mandrel and translational motion of leaching glue tank is controlled by computerized electric machine. The layer number of twisting is gradually increased to meet the thickeness of design wall. After winding is completed, resin in products should be solidified and then form mandrel from glass reinforced tube. Continuous filament winding process (belongs to continuous method) The process is that pipe pass through a feeding station which is to supply resin presoak roving, chopped glass reinforced fiber, resin sand mixture. then pipe formed in the continuous progress of mandrel. Casting process (belongs to fixed-length method) In this process, chopped glass fiber reinforced materials and sand are put into the steel mould fixed in bearing, then unsaturated resin used as catalyst is added into one side of steel mould to dip reinforced materia. Under the effect of centrifugal force, the resin exchange fiber and filler in the air so as to create a nonporous compact composite material and a smooth, bright and clean pipe surface layer with rich resin. steel tubes start to curing under high temperature. Pipe produced in this way is also called glass reinforced plastic sand pipe. In the world, the number of manufacturers using reciprocating filament winding process to produce tube is more than that of the rest two production technology. One of the reasons is is that the former has a wider range of usage and its applicability is better.
- Q:Is glass steel a glass?
- Toughened glass is stronger than ordinary glass. One advantage is strong, and the two is broken, will not produce the tip of the debris, so that people are relatively safe.
- Q:Does toughened glass and glass?reinforced?plastics are the same?
- It should be said that they are the same material.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
E Glass Woven Roving 600grs
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
Related keywords
