Cryogenic Insulation Paper Used in LNG
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 roll
- Supply Capability:
- 10000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of Cryogenic Insulation Paper Used in LNG
Cryogenic insulation paper (P paper/Z paper)/aluminum foil (or aluminized polyester film) compositions are laminated of Cryogenic insulation paper and aluminum foil (or aluminized polyester film). Cryogenic insulation paper can be wrapped to the cryogenic inner tank directly and no need to composite by user. Therefore, cryogenic insulation paper can effectively reduce the waste of material and hugely increases efficiency. The width varies from 40mm to 1800mm.
Applications of Cryogenic Insulation Paper Used in LNG
Cryogenic Insulation Paper is the top selected insulation materials applicable for cryogenic liquid storage & mobile containers and pipeline systems for liquid oxygen, nitrogen, hydrogen, helium, argon, LNG and etc.
Advantages of Cryogenic Insulation Paper Used in LNG
Flame-retardant
Light
High tensile strength
Low heat conductivity coefficient
Large thermal contact resistance
Low air content under the vacuum and broad operating temperature(-269℃-500℃)
Image of Cryogenic Insulation Paper Used in LNG
Technical Data of Cryogenic Insulation Paper Used in LNG
FAQ
Q1: How do you control the products quality?
A1: With strict quality control system throughout the materials selection and production process, our refractory and ceramic fiber products quality is effectively controlled to meet customer requirements.
From the raw materials selecting, our quality control begin. The quality certificates of raw materials are required and each batch will be tested before using. During production, the quality control is conducted by workers and then each piece will be sorted and examined by quality supervisor.
Q2: What`s the lead time for my order?
A2: It depends on customers’ requirements and our production schedule. And usually we need 30-60 days for refractory bricks, 10-25 days for unshaped refractory materials and 10-20 days for ceramic fiber blankets.
Q3: Can you offer Door-to-Door delivery?
A3: Yes, but only for some countries such as U.S., UAE, Saudi Arabia, Iran, and Russia, etc.
Q4: What is the minimum quantity?
A4: There is no minimum order quantity. Depending on the item and processing, there may be a minimum production required, however we can offer a quotation based only on the quantity you need.
Q5: Can you give me a brief introduction of the application of your products?
A5: CNBM (China National Building Material) core refractory business comprises the production, sale and installation of high-grade refractory products, the development and implementation of customized system solutions as well as rendering outstanding services for the key industries in Glass, Iron& Steel, Petrochemical, Cement, Ceramic and Nonferrous Metals.
- Q:What is the meaning of deep frozen
- Frozen food can make the flavor and nutrient retention is best, and it is said that at -35 deg.c, food oxidation reactions are very slow, that is to say deep freezing over the food nutrition and flavor of fresh food with little difference. In short, deep frozen to fresh.
- Q:What is the meaning of vacuum cooling in heat treatment
- Placed for a period of time, known as cryogenic treatment, under normal circumstances are usually treated with liquid nitrogen.
- Q:Cryogenic treatment to improve what performance?
- Cryogenic treatment (cryogenic treatment) refers to the materials needed at -190 DEG C to -230 DEG C under treatment. Suitable for all metal or nonmetal material, such as alloy, carbide, plastic (nylon and Tie Fulong), aluminum, ceramics etc..
- Q:I would like to ask how the process of cryogenic treatment
- Biology: fast cooling, can prevent the crystallization of cells in the water, does not destroy the cell organization. In the preservation of sperm, organ preservation, food preservation, preservation of certain life and so onMedical treatment: cryotherapy, treatment of certain skin diseasesSpace: the space environment simulation, satellite ground test station, using liquid helium, create -200 degrees of low temperature.Noise: high sensitivity radar telescope, using liquid helium cooling, receiving device, noise reductionVacuum: the use of cold well technology can get high vacuum
- Q:Can the cryogenic phase control the cooling rate?
- 1, the principle of liquid nitrogen refrigeration: storage of liquid nitrogen in the container through the liquid in the sublimation of heat to take away the heat of the workpiece heat. Liquid nitrogen refrigeration can not be reused after the need to add a new liquid nitrogen, a large range of cooling rate, cooling temperature range of 0-196 degrees C.
- Q:What is the meaning of cryogenic technology in the mechanical process, what is the specific practice?
- Copper alloy, hard alloy, plastic, glass and so on to improve the uniformity of low temperature, stable size, reduce deformation, improve service life
- Q:How many changes in the properties of the cryogenic metal?
- The name of the processing content specification / processing content of the original service life (sub / piece) after the service life (times / pieces)1 milling cutter milling keyway 7.5-2NT 40034352 step drilling hole Phi: 1.2, 23, 1331004163 milling cutter milling air hole Phi 11.5, 32-2NT
- Q:Ultra low pressure casting mold useful, how to arrange the process? Thank you
- The size stability of die casting die is mainly solved by the following aspects:1, in the die casting process and mold temperature stability under the premise of the mold size! To ensure product size!2, in the design of die casting products, according to the way the product and the simulation of the temperature field, the type of product, the direction of contraction and so on to develop the contraction ratio, the general product shrinkage rate of about 5/1000! Step by step cumulative experience!3, die casting mold in the production period of time, (for example, 5 thousand to 10 thousand times), can do stress treatment, ABP treatment, etc.! In order to reduce the internal stress in the production process of the mould, it can achieve the purpose of stabilizing the size, preventing the fracture and increasing the service life of the die!Want to help you!
- Q:What is a cryogenic fast line
- Broadly, cryogenic means - the temperature under 100 ℃, in industry can be divided into gas liquefaction technology, chemical industry and material industry of cryogenic treatment.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Cryogenic Insulation Paper Used in LNG
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 roll
- Supply Capability:
- 10000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
