Color Coated Aluminum Coil AA5083 Aluminum Alloy
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 60000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Color Coated Aluminum Coil AA5083 Aluminum Alloy
1. Grade
Series: | 1100 etc. |
Series: | 3003 3004 3005 etc. |
Series: | 5006, 5052 |
Series: | 8011 etc. |
2. Thickness
Plate Thickness | 0.1mm, 0.12mm,0.15mm,0.20mm,0.25mm,0.28mm,0.3mm,0.35mm,0.38mm, 0.4mm,0.5mm, 0.53mm, 0.58mm,0.68mm,0.7omm,0.73mm,0.75mm, 0.90mm, 1mm, 1.2mm |
Coil Thickness | 0.1mm, 0.12mm,0.15mm,0.20mm,0.25mm,0.28mm,0.3mm,0.35mm,0.38mm, 0.4mm,0.5mm, 0.53mm, 0.58mm,0.68mm,0.7omm,0.73mm,0.75mm, 0.90mm, 1mm, 1.2mm |
3. Description
Alloy | AA1100, 3003, 3004, 3105, 5006, 5052, 8011, etc , etc. |
Temper | H16, H18, H24, H26, H28 |
Thickness | From 0.1mm to 1.2mm |
Width | Standard width:1240mm, 1270MM |
Special width:1000mm, 1200mm, 1240mm, 1270mm, 1520mm, 1620mm | |
Diameter | Standard dia:1200mm |
Interior dia: 150mm,405mm, 500mm, 505mm, 510mm | |
outer diameter: 1200mm | |
Weight | 2.5 T/coil,3.0 T/coil |
Coating thickness | PE:>=16 micron , PVDF:>=25 micron |
Protective film | As per customer’s request |
Coating paint | PVDF, PE(Polyester), epoxy, polyamide, polyurethane |
Color | Soid, metallic, high gloss,stone,timber,brush,mirror,sparkling, RAL or by customer requirements. |
Weight | As per customer’s request |
Surface | Embossed, mill finish, coated |
Gloss | 10-100% |
Coating Hardness (pencil resistance) | More than 2h |
Coating adhesion | 1J |
Impact Resistance | No peeling or cracking(50 kg/cm) |
Application | ACP,wall cladding,facades,roofs and canopies,ceilings,signboards,blind window,display platforms,electrical panels,etc |
Coating Thickness | PE coating:more than 16 micron |
PVDF coating:more than 25micron |
4. FAQ
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
A: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, West Union, etc
- Q:What is the best sticky glue?
- Generally have a professional glue, the teacher asked the workers more clearly
- Q:How to remove the aluminum plate
- Do not know how long your house's aluminum plate is decorated. If it is new to use very thin tools, such as blades, angle, it is best to find a professional staff to remove. If it is the old house, then no longer use the words can be casually demolition.
- Q:The top of the kitchen ceiling of the ceiling of the ceiling
- (Open the glue and glue), and then use the glass glue to the wall and the aluminum strip of the seam filling just fine.
- Q:What kind of light is the kitchen? Can the old ceiling lamp be installed?
- Vintage ceiling lamps, if not heavy case, you can directly with self-tapping screws on the aluminum plate. If it is too heavy that do not install.
- Q:How to dismantle the aluminum plate
- The intensity can be pulled out slightly, if it is a strip of the ceiling that pushed from the wall on the edge of a piece of the inside can be taken down, and then followed down, but after all strenuous.
- Q:Kitchen, bathroom ceiling with aluminum alloy plate is good or plastic buckle plate good?
- Plastic buckle plate is not very good, now with very little, with a long time easy to deformation and also yellow
- Q:Aluminum plate next to the edge of the edge, to wear a hole, put a small pipe down. What kind of drilling is good? Edge and aluminum plate are already installed up.
- Drill with a pistol on the line
- Q:Yuba size of the general size of the size, and how to install the aluminum buckle hanging on the top of the
- Suitable for aluminum hanging plate hanging 30X30, there are 30X60, most directly on the keel can be, and some also with a screw, tightening can be reinforced.
- Q:How to remove the ceiling of the aluminum plate
- 1, square aluminum slab plate: with a hanging the kind of hook sucker sucked the middle of the buckle plate, and then pull down, down on the. 2, the strip of aluminum plate: wallpaper knife along the gap into the back and forth to draw a few, find the location of the clip, and then gently pry down, the first pry the middle of the pry on both sides of the easy deformation. 3, the side of the aluminum with a sucker from the edge of the pull down or with a small word screwdriver from the edge of the pry down; long buckle of the aluminum plate is required to remove from the last board and then removed; Kouban can be a small flattened screwdriver with the edge of the single piece of the pry down, you can remove a single piece of single plate.
- Q:The top of the kitchen did not line, like the largest reduction in space, at least how high Is the kitchen
- Two probabilities, one is the commercial kitchen. Commercial kitchen, then taking into account the new wind, exhaust, fire pipe will be arranged at the top of the kitchen.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Color Coated Aluminum Coil AA5083 Aluminum Alloy
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 60000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords