Color Coated Aluminum Coil AA5052 Aluminum Alloy
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Color Coated Aluminum Coil AA5052 Aluminum Alloy
1. Grade
Series: | 1100 etc. |
Series: | 3003 3004 3005 etc. |
Series: | 5006, 5052 |
Series: | 8011 etc. |
2. Thickness
Plate Thickness | 0.1mm, 0.12mm,0.15mm,0.20mm,0.25mm,0.28mm,0.3mm,0.35mm,0.38mm, 0.4mm,0.5mm, 0.53mm, 0.58mm,0.68mm,0.7omm,0.73mm,0.75mm, 0.90mm, 1mm, 1.2mm |
Coil Thickness | 0.1mm, 0.12mm,0.15mm,0.20mm,0.25mm,0.28mm,0.3mm,0.35mm,0.38mm, 0.4mm,0.5mm, 0.53mm, 0.58mm,0.68mm,0.7omm,0.73mm,0.75mm, 0.90mm, 1mm, 1.2mm |
3. Description
Alloy | AA1100, 3003, 3004, 3105, 5006, 5052, 8011, etc , etc. |
Temper | H16, H18, H24, H26, H28 |
Thickness | From 0.1mm to 1.2mm |
Width | Standard width:1240mm, 1270MM |
Special width:1000mm, 1200mm, 1240mm, 1270mm, 1520mm, 1620mm | |
Diameter | Standard dia:1200mm |
Interior dia: 150mm,405mm, 500mm, 505mm, 510mm | |
outer diameter: 1200mm | |
Weight | 2.5 T/coil,3.0 T/coil |
Coating thickness | PE:>=16 micron , PVDF:>=25 micron |
Protective film | As per customer’s request |
Coating paint | PVDF, PE(Polyester), epoxy, polyamide, polyurethane |
Color | Soid, metallic, high gloss,stone,timber,brush,mirror,sparkling, RAL or by customer requirements. |
Weight | As per customer’s request |
Surface | Embossed, mill finish, coated |
Gloss | 10-100% |
Coating Hardness (pencil resistance) | More than 2h |
Coating adhesion | 1J |
Impact Resistance | No peeling or cracking(50 kg/cm) |
Application | ACP,wall cladding,facades,roofs and canopies,ceilings,signboards,blind window,display platforms,electrical panels,etc |
Coating Thickness | PE coating:more than 16 micron |
PVDF coating:more than 25micron |
4. FAQ
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
A: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, West Union, etc
- Q:How to look good or bad
- Look at the keel: keel is good or bad is a lot of consumers ignore the problem, the keel material is generally divided into aluminum, iron and no fingerprint steel. Aluminum keel will not rust, but because the cost is relatively high sales so very little. Iron keel is easy to rust, although the keel section hidden in the back of the ceiling generally do not see, but the rust scattered on the ceiling on the ceiling is not good, over time will affect the stability of the ceiling. No fingerprint steel keel relative to the iron keel it is not so easy to rust, is currently the most commonly used home improvement tooling sales. I sincerely hope that consumers can buy their own ideal integrated ceiling products.
- Q:What is the angle of the ceiling? What is the inverted angle?
- Corner line is the angle of the edge of the article, most of the T-shaped.
- Q:Ladle board kitchen ceiling with embossed pattern so clean it
- Bad cleaning, with the text of the more beautiful, clean is a problem, easy to fall ash
- Q:Bathroom ceiling plate ceiling from the ceiling is the smallest number
- And no distance above it does not matter, the height of the bathroom you keep between 2.2 meters to 2.4 meters for the best size. Too high winter yuba heating is not to force. Too low a sense of space to suppress!
- Q:Is the size of the downlight on the ceiling of the aluminum slab plate the same as the size of the normal downlight? How do I install the downlight if I buy the aluminum plate?
- Ceiling on the installation of downlights, generally have to dig holes, which is regardless of whether the aluminum plate, the practice is the same.
- Q:It is good for smallpox and aluminum buckets
- According to the shape of the bar, square, grille, etc., but the grille can not be used for kitchen, bathroom ceiling; rectangular plate maximum size 600mm * 300mm, the general room width of about 5 meters, Of the decorative selection of long strip of the overall sense of the plate is stronger, the decoration of the small room is generally available 300mm * 300mm. In order to make the ceiling look more beautiful, you can mix the width and width, with two color combinations. Aluminum plate thickness of 0.4,0.6,0.8 mm and so on, the thicker the more flat aluminum slab, the longer the longer life. However, due to the poor thermal insulation properties of metal plates, in order to obtain a certain sound absorption, insulation function, in the choice of metal plate ceiling decoration, you can use the addition of glass wool, rock wool and other insulation materials to achieve the effect of adiabatic sound absorption.
- Q:Aluminum alloy doors and windows of the aluminum plate is what
- Aluminum plate is made of aluminum alloy plate, through the open material, shear angle, molded, aluminum plate surface using a variety of different coating processing to get a variety of aluminum plate products, aluminum slab plate, the most important two Type, one is home improvement integrated Lvkou Ban, the other is the engineering Lvkou Ban, home-made aluminum slab board mainly to roll and frost the main series of two, with the development of home improvement integrated aluminum plate has been Variety of different processing technology are used to them, such as thermal transfer, glazed, ink printing, mirror, 3D and so on series is the most popular in recent years, home improvement integrated aluminum slab plate, home improvement integrated aluminum plate is Board surface fancy, service life, board advantage and so on to obtain market recognition, engineering aluminum slab board is commonly used roller coating, powder coating, film, scrub and other surface coating, the surface is relatively simple, the color is solid , Of which milky white is the most expensive to use aluminum slab plate, engineering aluminum plate to buy the most important depends on the coating, coating color protection is the primary consideration, the coating to maximize the life to ensure that the owners interest.
- Q:How to sub-aluminum buckle plate is good or bad?
- Look at the keel: keel is good or bad is a lot of consumers ignore the problem, the keel material is generally divided into aluminum, iron and no fingerprint steel. Aluminum keel will not rust, but because the cost is relatively high sales so very little. Iron keel is easy to rust, although the keel section hidden in the back of the ceiling generally do not see, but the rust scattered on the ceiling on the ceiling is not good, over time will affect the stability of the ceiling. No fingerprint steel keel relative to the iron keel it is not so easy to rust, is currently the most commonly used home improvement tooling sales. I sincerely hope that consumers can buy their own ideal integrated ceiling products.
- Q:How is the angle of the aluminum buckle plate installed?
- A lot of glass mirror sticky.
- Q:Aluminum plate next to the edge of the edge, to wear a hole, put a small pipe down. What kind of drilling is good? Edge and aluminum plate are already installed up.
- Drill with a pistol on the line
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Color Coated Aluminum Coil AA5052 Aluminum Alloy
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords