Basalt fiber rebar for highway engineering, expoy coated basalt composite bar
- Ref Price:
-
$1.00 - 2.00
/ kg
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 4000 kg
- Supply Capability:
- 100000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Basalt Composite Bar (building type, bridge type)
Introduction
Basalt composite bar is similar to carbon fiber and fiberglass, but it has better mechanical properties and is lower in cost tah
Basalt composite bar is an ideal advanced material to replace steel and glass rebar. It can provide different size and apperance bars to meet clients demanding.Such as sand coated ,without sand-coated,rod,basalt rebar with steel core inside,which is widely used in the production of building components,in view of their high electro-insulating propertied ,basalt bars are used for making insulators for high -voltage power lines ,hydraulic engineering,concrete barriers,highlighting poles & seismic hazards.And rebar with cable in the core is new technology to supervise the condition of buildings,airports.tunnels,etc.
Property
1. Has a green environment-friendly performance
2. Alkali and radiation resistant
3. Fire-resistant and high-strength
4. Like fiberglass many products are made including yarn, mesh, geo-grid, roving, cloth, composite bar, chopped fiber, unidirectional cloth, fabrics, needled mats, Basalt Rebars, etc.
Applications
1, Seismic observation station, the harbor pier protection works and buildings of all kinds of thread (sand) bars;
2, Subway stations, bridges, non-magnetic or electromagnetic nature of concrete structures, pressed concrete
roads, anti-corrosion chemicals, to panels, chemical tanks, underground engineering, the basis of magnetic
resonance imaging facilities, such as construction of the various threads (blast) reinforcement (continuous
reinforcement process);
3, Soal mines, tunnels bolt ,roads, slope, etc. support the permanent anchor;
4, Communication building, electronic equipment, factory, building nuclear fusion, magnetic levitation railway
track concrete slab, telecommunications transmission towers, television stand, fiber optic cable to strengthen
the core.
5, Port terminals, dams and other water conservancy and hydropower facilities;
6, Housing construction, highway and bridge construction and reinforcement;
7, Wet areas and areas with harsh environments such as acid-base bridge, tunnel and other reinforced concrete
structures.
Specification
Basalt Fiber Rebar | |||
Type | Nominal Diameter(mm) | Weight(g/m+-5%) | Coil length(m) |
BFRP-4 | 4 | 25 | 100-300 |
BFRP-6 | 6 | 56 | 100-300 |
BFRP-8 | 8 | 100 | 100-300 |
BFRP-10 | 10 | 158 | 100-300 |
BFRP-12 | 12 | 227 | 100-300 |
BFRP-16 | 16 | 405 | Piece length cut according to customer's requested |
BFRP-19 | 19 | 592 | |
BFRP-22 | 22 | 768 | |
BFRP-25 | 25 | 1076 | |
FAQ
1. How long will you get reply?
Any inquiry will be replied within 24 hours. Usually we will reply within 12 hours.
2. How long is warranty period?
We provide 3 year warranty period.
3. What is your MOQ?
Our MOQ is 4000 kgs.
- Q:Medium alkali glass fiber cloth
- It is mainly used for large and medium sized non-metal container, equipment, pipe and shell.
- Q:What's the difference between fiberglass roving and spun yarn? Is the production equipment the same?
- The company has advanced production equipment, strong technical force, mainly produces non alkali glass fiber 30 and 40 spun yarn, and produces 1500 tons annually. There are two kinds of paraffin and silane
- Q:What is the difference between glass fiber reinforced plastic antenna and cannon antenna?
- There is no difference. What if the gain is the same. The diameter of cannon antenna also is glass steel with it is actually a backfire antenna, and its muzzle must target the goal. Outer diameter materials of some cannon antenna can be iron, and the cannon antenna is very thick.
- Q:What is the technological process of glass?Fiber?chopped?strand mat?
- Fiber reinforced epoxy resin composite material forming process. Compared with traditional materials, the composite material has a series of irreplaceable characteristics, which has been developed rapidly since the second world war. Although the production is small, but the level of composite materials is one of signs that marks national or regional science, technology and economic level. Composite material is mainly composed of two parts: reinforced material and base material. Reinforced material: In composite material, some reinforced material such as the glass fiber in glass?reinforced?plastics and carbon fiber in CFRP(carbon fiber reinforced material) give major mechanical property to composite material. Matrix: Matrix is a single material which aims to make composite material as a whole such as resin in glass?reinforced?plastics( epoxy resin referred in this paper). Composite materialcan be divided into three kinds according to the matrix material: resin composite material, metal matrix composite material, and inorganic nonmetallic composite material such as ceramic matrix composite material.
- Q:What can be produced by waste flat glass.
- 1, It can used for producing asbestos cut strand. 2, It can be used for producing twistless roving. 3; It also can pull into a wire for producing glass fiber cloth. It is widely used.
- Q:grc fiberglass
- the content of ZrO2 in alkali resistant glass fibre whcih was used as reinforced material for portland cement is not less than 16. According to specific provisions in the T841, it is clearly required that alkali-resistant glass fiber must be used in GRC with its type incledes twistless roving.
- Q:How to make a glass fiber reinforced plastic?
- The answer is no. The glass fiber reinforced plastic grille can be made with a mold, so it would be very easy to do it, while by manual, it would be troublesome, and do not have compressive property.
- Q:Does centrifugal glass wool is made from glass fiber
- No, it doesn't. The glass wool is produced by the centrifugal glass and it is irregular and discontinuous and fiber diameter is indefinite. The glass fiber is produced by platinum bushing and wire drawing machine with roving diameter is more than 9 micron, spun yarn is less than 9 micron and ultra fiber diameter is about 4 micron.
- Q:What is the difference between pultrusion geogrids and molding geogrids.
- Bearing profiles can moulding FRP geogrids after demoulding. The upper layer is plate structure: It is mainly formed by connecting pultrusion moulding "I" or "T". At the same time glass fiber twistless roving is spreaded in large metal mold with the lower pultrusion geogrids is hand paste. Its role is to connect the bearing profile. According to need, various extrusion molding round bar or abnormal bar interval material are used. Pultruded FRP geogrids mainly consists of three parts and then formed by curing. Pultrusion moudling "I" or "T" profile are used as a bearing rod with various pultruded round bar or abnormal bar (adhesive bar) are used as cross bar by adhesion agent. According to a certain distance, transverse rod and the bearing rod is fixedly connected together to form the FRP geogrids. The surface of molding FRP geogrids in the production can be sealed and plastic geogridsis produced by machine. Its function is to adjust and fix the void ratio of the glass fiber reinforced plastic grating.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Basalt fiber rebar for highway engineering, expoy coated basalt composite bar
- Ref Price:
-
$1.00 - 2.00
/ kg
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 4000 kg
- Supply Capability:
- 100000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
