Aluminum Silicon Alloys/AlSi12 Alloy/AlSi20/AlSi24/AlSi30/AlSi50/Ingot/Bars
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 8000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Aluminium alloy Introduction:
Weight:5kg/pc
Length:60cm
Width:10cm
Height:4.5cm
2.Chemical Composition
Alloy | Composition(%) | Form | ||||||||
Si | Fe | Ti | Cu | Mn | Cr | Ni | Impurities | Balance | ||
AlSi12 | 11.5-13.0 | 0.35 | 0.10 | 0.20 | 0.10 | - | - | 0.15 | Al | Ingot |
AlSi20 | 18.0-22.0 | 0.45 | 0.10 | 0.10 | 0.10 | 0.10 | 0.10 | 0.15 | Al | Ingot |
AlSi24 | 22.0-26.0 | 0.45 | 0.10 | 0.20 | 0.35 | 0.10 | 0.20 | 0.15 | Al | Ingot |
AlSi30 | 28.0-32.0 | 0.30 | 0.05 | - | - | - | - | 0.15 | Al | Ingot |
AlSi50 | 47.0-53.0 | 0.30 | 0.05 | - | - | - | - | 0.15 | Al | Ingot |
3.Pictures
5.FAQ
We have organized several common questions for our clients,may help you sincerely:
①How about your company?
A world class manufacturer & supplier of castings forging in carbon steel and Non-frrous alloys,is one of the large-scale professional investment casting production bases in China.
②How to guarantee the quality of the products?
We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q:Put the aluminum wire into the ferrous sulfate solution. What color changes on the surface of the aluminum wire?
- There would be no reaction if there were no wires. Because the aluminum sheet has a dense oxide film.Aluminum oxide does not react with ferrous sulfate.If it's ideal. Think aluminum wire is pure aluminum: the aluminum wire into the ferrous sulfate solution, there are bubbles generated, the gas is hydrogen
- Q:Manufacturing process of LED device
- As the LED chip is still closely spaced after dicing, the spacing is very small (about 0.1mm), which is not conducive to the operation of the subsequent process. We use the expansion machine to expand the film on the bonding chip, and the LED chip spacing is stretched to about 0.6mm. Manual expansion can also be used, but it is easy to cause chip waste, waste and other undesirable problems.
- Q:How do the radiator from the Water Leakage
- If the first is trachoma, heating switch off, let the water inside, then use soap to plug the blisters Water Leakage, and then use plastic glue (glue, a bit like plasticine) to Water Leakage, after the glue dry. I use this method, so that it is convenient and effective.
- Q:Pure copper wire for 1 points and 2.5 copper clad wire which is better?
- 2.5 copper wrapped aluminum wire, to withstand the power of 1 than the sheath line of pure copper line, but its line is too hard, if your induction cooker or heater power less than 3 kilowatts, you can use the 1 sheath line.
- Q:Can aluminum wire be used as welding rod for ws250 welding machine?
- The content of impurities in common aluminum wire is higher, and the composition of welding wire and chemical elements can not meet the requirement of aluminum welding wire. Can not replace the aluminum welding wire for welding use.
- Q:What can drum up Water Leakage glue
- L, better solder it2, see how big hole, if not very easy to use aluminum wire, solder wire into the hole, with hammer flat.
- Q:Can solder aluminum wire with tin wire?
- Aluminum is too hot to solder with tin.
- Q:Which is the best wire, a few thin copper wires and a thick single aluminum wire?
- A thin copper wire and a little bit of a single aluminum wire
- Q:The difference between traditional resistance welding and aluminum wire welding
- Mainly used for welding large modules,Resistance welding is the use of current through the base material, because the parent material resistance and heat generated by welding methodsMainly used for higher precision, more stringent appearance of the workpiece,
- Q:Copper wire drawing machine with copper wire drawing machine, what is the difference
- Drawing machine mechanical reduction rate is not the same, when the mechanical reduction rate of copper clad aluminum alloy wire drawing machine design is so the face should be smaller and the copper wire
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Aluminum Silicon Alloys/AlSi12 Alloy/AlSi20/AlSi24/AlSi30/AlSi50/Ingot/Bars
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 8000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords