Aluminum fan
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
We are the largest aluminum profilemanufacture in
We can provide such heat sink as belows:
Material | Alloy Aluminum 6063,6061,6005,6082 or customer nominated |
Temper | T3, T4, T5, T6 and other |
Surface | Anodize, electrophoresis, powder coating, PVDF coating, etc. |
Colour | Any colour based on Standard Germany RAL Mark |
Length | According to the drawings |
Good Package | Inner plastic film /outside carton/wooden pallets |
Payment Method | T/T, L/C, etc |
Delivery Time | Normally 2-4 weeks, Delivery time can be consulted. |
Press Machine | 500-12500 tons all together 93 press lines. |
Fabrication | 1. Hest sink 2. Drilling; 3. Bending; 4. Cutting; 5. etc. |
Certificate | ISO/TS 16949,DNV,IRIS,CCS,AFA,etc. |
Dies | 1. Using our dies, no fee; |
2. Using customer drawing, opening dies, usually about 5~50 tons then the dies cost can be refunded. | |
3. Die cost is negotiable base on the order quantity | |
Capability | Annual output 800,000 tons |
- Q:Will the aluminum tube (6063) anodized after the local needle hole shaped point, what is the reason for it, is the material problem or oxidation plant corrosion?
- You are the light, or the fog, if light, are certainly no oxidation treatment, that is, if the surface is like fog, that is normal.
- Q:What's the difference between an air conditioned pure copper tube and an aluminum tube?
- For users, the difference is modest. If you need to use only intermediate machine, air conditioning copper connecting pipe than aluminum connecting pipe to some reliable air conditioning. The air-conditioner doesn't make any difference.
- Q:How can the refrigerator be welded with copper aluminum tube?
- 1) prior to the expansion of copper aluminum tube (caliber size to M51 welding wire can be very good penetration into the copper aluminum pipe border is appropriate), the copper tube into the aluminum tube, it is best to polish the surface of the dirty material.2) apply the equivalent M51-F flux at the weld and heat the base material until the surface M51-F flux boils, indicating that the working temperature of the M51 wire has reached 179 degrees.3) after the M51-F flux boils, the M51-F wire is fused with the M51 wire by the temperature of the base metal. At this point, continue to heat the base metal to compensate for the loss of heat, because copper and aluminum are very good heat conductors. Here, because there is a continuous heating process, M51-F has a process of evaporation and dissipation. When the base metal surface is dry and without flux, please use M51 welding wire with M51-F flux to drip on the welding surface.4) when the M51 wire is fully flowing, let it cool slowly and naturally. Surface fluxes are easily removed with warm water.
- Q:What are the common applications of aluminum pipes?
- Aluminum pipes have a wide range of applications across various industries. One of the most common applications of aluminum pipes is in the construction industry. Aluminum pipes are often used for plumbing, heating, and ventilation systems due to their lightweight nature, corrosion resistance, and ability to withstand high temperatures. In the automotive industry, aluminum pipes are commonly used for air intake systems, turbo intercoolers, and radiator systems. The lightweight nature of aluminum pipes helps improve fuel efficiency and overall performance of vehicles. Aluminum pipes also find extensive use in the manufacturing of furniture, particularly for outdoor use. The corrosion resistance of aluminum makes it an ideal choice for outdoor furniture as it can withstand exposure to harsh weather conditions without deteriorating. In the aerospace industry, aluminum pipes are used for various applications, including aircraft structural components, fuel lines, and hydraulic systems. The lightweight nature and high strength-to-weight ratio of aluminum pipes make them suitable for these critical applications. Furthermore, aluminum pipes are extensively used in the marine industry for applications such as boat and shipbuilding, as well as offshore structures. The corrosion resistance of aluminum ensures durability and longevity in marine environments. Overall, the common applications of aluminum pipes span across construction, automotive, furniture, aerospace, and marine industries. Their lightweight nature, corrosion resistance, and versatility make them a popular choice for various applications.
- Q:Are aluminum pipes suitable for pharmaceutical manufacturing?
- Aluminum pipes indeed possess the potential to be appropriate for pharmaceutical manufacturing. Thanks to its manifold advantageous properties, aluminum stands as a frequently employed material in the pharmaceutical sector. Being lightweight, resistant to corrosion, and easily sterilizable, it emerges as an ideal choice for situations where cleanliness and hygiene hold utmost importance. Furthermore, aluminum pipes offer the convenience of malleability, enabling the creation of diverse shapes and sizes, thereby facilitating the design of pharmaceutical equipment. Nonetheless, one must bear in mind that certain medications or substances could potentially react with aluminum. Thus, it is crucial to carry out compatibility tests to ascertain the suitability of aluminum pipes for specific pharmaceutical manufacturing processes.
- Q:Can aluminum pipes be used for water treatment plants?
- Yes, aluminum pipes can be used for water treatment plants. Aluminum pipes are commonly used in water treatment plants due to their corrosion resistance, lightweight nature, and durability.
- Q:How do you usually process hollow aluminum tubes? I want to make aluminum tubes myself
- An ordinary lathe can be used if continuous casting can be used in large quantities
- Q:Are aluminum pipes suitable for chemical refineries?
- Yes, aluminum pipes can be suitable for chemical refineries under certain conditions. Aluminum pipes are lightweight and have good corrosion resistance, making them suitable for transporting certain chemicals in chemical refineries. They are particularly useful for handling non-corrosive fluids, such as water or air. However, aluminum pipes may not be suitable for handling highly corrosive chemicals or high-temperature applications, as they may react with certain chemicals or lose their strength at elevated temperatures. In such cases, materials like stainless steel or corrosion-resistant alloys may be more appropriate. It is essential to consider the specific requirements of the chemicals being transported and consult with experts to ensure the selection of the most suitable pipe material for chemical refineries.
- Q:Are aluminum pipes suitable for irrigation systems?
- Yes, aluminum pipes are suitable for irrigation systems. Aluminum is a lightweight and durable material that is resistant to corrosion, making it an excellent choice for irrigation systems. It can withstand high water pressure and is less likely to crack or break compared to other materials such as PVC or steel pipes. Additionally, aluminum pipes offer flexibility and ease of installation, as they can be easily cut and connected. Moreover, aluminum pipes have a long lifespan and require minimal maintenance, making them a cost-effective option for irrigation systems. Overall, aluminum pipes are a reliable and efficient choice for irrigating agricultural fields, gardens, and landscapes.
- Q:What happened to the mold sticking when drawing the aluminum pipe? How do you make the mold?
- Such as tensile material, material circle diameter, tensile concave convex mold with the size, size, material sticking position, whether or not to pull the thin stretch, lubricating oil type and so on, which is the hard alloy you say ah, we generally use outside processing, not only tungsten steel, pull thin shallow drawing himself with the lathe. Their hard alloy quenching, the workpiece material is easy to stick, 0.05MM does not produce sticky material, the size of R according to the general drawing coefficient depends on the material, if the material is allowed, R can be a little friction, the area is small, the workpiece pulled out a little too smooth, the temperature is not too high to die I also met sticky material problems, 0.5MM aluminum plate, 7 points pulled into a pen inside the ink tube, which is always a sticky material, later changed the way the size of the die,
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Aluminum fan
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords